• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.105-109
• /
• 2020

This study was conducted to the improvement of solar light-based artificial light supply system and effect of lettuce cultivation. The artificial light supply system was consisted of units such as light source, power, system measurement and controller. The light source supply was composed of a solar transmitter and an LED lamp. The power supply consisted of an leakage breaker, SMPS, LED controller and relay. The solar transmitter was made of a quartz optical fiber with optimal light transmission. Artificial light used white lamp among LEDs. System measurement and control consisted of touch screen, Zigbee communication module and light quantity sensor. The results of test confirmed that the LED light is automatically activated when the intensity measured by the light intensity sensor is 200 μmolm^-2s^-1 or less. Moreover, the leaf length, root length, chlorophyll content and root fresh weight of optical fiber treatment was hight than LED lamp treatment. Therefore, it can be inferred that the energy-saving solar light collector device can be effective in the indoor lettuce production. However, the use of LED lamp is also recommended to assure the availability of sufficient sunlight in cloudy and rainy days.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.2
• /
• pp.264-270
• /
• 2012

The effect of pectinase on wine production and quality during wine fermentation was investigated in an experiment a laboratory scale (2 kg grape/5 L tank). Experimental results show that the enzyme-treated sample displayed a 13% higher rate of grape juice production compared to control (enzyme-untreated). In the case of color analysis, the addition of pectinase improved the color quality of wine in terms of both color intensity and hue values. The results show that pectinase enhanced both dark-red color and clarity of wine during the fermentation period. Further, the methanol concentration of the wine sample treated with pectinase reached 225.32 mg/L (control: 100.72 mg/L) due to hydrolysis of pectin. Sensory analysis after fermentation showed that pectinase significantly increased the color, smell, taste, and touch intensity scores of wines compared to control.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.230-238
• /
• 2014

In this paper, we propose the possible way of accurate analysis and examination of ITO sensor to discriminate whether mutual capacitance ITO sensor is defective by using mutual capacitance of data in each node which consists of electrodes inside of ITO sensor. We have analyzed the structure characteristic of mutual capacitance ITO sensor which is used as an input device for not only small size electronics like mobile phone and tablets but also big size electronics and designed the circuit to inspect ITO sensor using touch screen panel IC. Set a variable related with mutual capacitance of charge and discharge and Implement to find and analyze accurate position when defect is made through the data from each node of ITO sensor. First, we can set a yield effective range through the first experiment data of mutual capacitance ITO sensor and by using the data of each node of ITO sensor which is the result from the second experiment, we can verify accuracy and effectiveness of effective range from the first experiment as a sample which is used in this experiment.

• Archives of Craniofacial Surgery
• /
• v.18 no.4
• /
• pp.255-260
• /
• 2017

Background: Surgery for reconstruction of defects after surgery should be performed selectively and the many points must be considered. The authors conducted this study to compare the local flap and skin graft by facial location in the reconstruction after resection of facial skin cancer. Methods: The authors performed the study in patients that had received treatment in Department of Plastic Surgery, Gyeongsang National University. The cases were analyzed according to the reconstruction methods for the defects after surgery, sex, age, tumor site, and tumor size. Additionally, the authors compared differences of aesthetic satisfaction (out of 5 points) of patients in the local flap and skin graft by facial location after resection of facial skin cancer by dividing the face into eight areas. Results: A total of 153 cases were confirmed. The most common facial skin cancer was basal cell carcinoma (56.8%, 87 cases), followed by squamous cell carcinoma (37.2%, 57 cases) and bowen's disease (5.8%, 9 cases). The most common reconstruction method was local flap 119 cases (77.7%), followed by skin graft 34 cases (22.3%). 86 patients answered the questionnaire and mean satisfaction of the local flap and skin graft were 4.3 and 3.5 (p=0.04), respectively, indicating that satisfaction of local flap was significantly high. Conclusion: When comparing satisfaction of patients according to results, local flap shows excellent effects in functional and cosmetic aspects would be able to provide excellent results rather than using a skin graft with poor touch and tone compared to the surrounding normal skin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.9-14
• /
• 2016

This study evaluated a digital locking device design using detection distance of 13.4mm of a human body sensing type magnetic field coil. In contrast to digital locking devices that are used nowadays, the existing serial number entering buttons, lighting, number cover, corresponding pcb, exterior case, and data delivery cables have been deleted and are only composed of control ON/OFF power switches and emergency terminals. When the magnetic field coil substrates installed inside the inner case detects the electric resistance delivered from the opposite side of the 12mm interval exterior contacting the glass body part, the corresponding induced current flows. At this time, the magnetic field coil takes the role as a sensor when coil frequency of the circular coil is transformed. The magnetic coil as a sensor detects a change in the oscillation frequency output before and after the body is detected. This is then amplified to larger than 2,000%, transformed into digital signals, and delivered to exclusive software to compare and search for embedded data. The detection time followed by the touch area of the body standard to a $12.8{\emptyset}$ magnetic field coil was 30% contrast at 0.08sec and 80% contrast at 0.03sec, in which the detection distance was 13.4mm, showing the best level.

• Journal of Science Education
• /
• v.44 no.2
• /
• pp.183-196
• /
• 2020

This study explores the effects of STEAM program using Arduino on preservice science teachers toward their STEAM core competencies. The STEAM program using Arduino consists of four stages: presentation of situation, creative design, emotional touch, and evaluation. The preservice science teachers learned the theoretical backgrounds of STEAM and Arduino. Then, they were given the chance to think about an environmental issue, which is fine dust. The preservice teachers designed an air cleaner and a fine dust measuring instrument using Arduino. The preservice science teachers also produced the air cleaner and the measuring instrument using Arduino. They measured the level of fine dust in the classroom before and after the use of the air cleaner. That is, the preservice teachers experienced each stage of STEAM: seriousness of fine dust, design and production of the measuring instrument of fine dust and air cleaner, and evaluation of the effectiveness of air cleaner. Further, they reflected on their experiences of STEAM program using Arduino. The results indicate that these preservice science teachers statistically improved communication competency, problem-solving competency, gathering information competency, logical analytical thinking competency, and creativity competency. However, there were no statistical improvements on teamwork competency and self-development competency. This study suggests that experiencing STEAM program using Arduino is valuable for the preservice science teachers to develop STEAM core competencies and further implement STEAM program their science classes in the future.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.74-82
• /
• 2014

The government is planning to expand the bio-gas supply as a method for mitigating greenhouse gas emissions to deal with climate change. By means of a policy instrument, the government is considering an introduction of the Renewable Fuel Standard (RFS) whose targets include bio-gas. This paper attempts to look into the economic effects of expanding the bio-gas supply by applying an input-output (I-O) analysis using a 2011 I-O table. The bio-gas supply sector consists of liquefied petroleum gas supply sector and city gas supply sector, based on the tenets of introducing the RFS. The production-inducing effect, value-added creation effect, and employment-inducing effect of the bio-gas sector are analyzed. The supply shortage effect and the price pervasive effect are also investigated. The results show that the production or investment of 1.0 won in the bio-gas supply sector induces the production of 1.0539 won and the value-added of 0.1998 won in the national economy. Moreover, the production or investment of 1.0 billion won, supply shortage of 1.0 won, and a price increase of 10.0% in the bio-gas supply sector touch off the employment of 0.5279 person, 1.6229 won, and an increase in overall price level by 0.0183%, respectively.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.1
• /
• pp.203-223
• /
• 2012

This study aimed to identify the factors of failure in cases where there was feasibility but was not successful in commercializing technology. For the study, 92 feasibility reports for new technologies were collected, and among these 4 studies that showed definite failure in commercialization of technology were analyzed in depth. Further analysis was based the factors pointed out by previous frameworks such as 1) discussion on success or failure in commercialization of technology, 2) that of venture company, and 3) valuation of technology studies. Previous studies pointed out success and failure factors as lack of funding, uncontrollable accidents, managing ability, inability for mass production and so forth, which had little difference to the pre-feasible evaluation of four cases. However, real reason was the lack of understanding technologies such as composition of technologies, production technologies required by stages, and lack of understanding of floor technologies. The misunderstandings were occurred regardless of CEO's experience and expertise. We did not touch the evaluation model of pre-feasibility studies, although we dealt with the failure of the pre-studies. The reason we do not generalize the results of this study is the fact that we dealt with only small cases.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.731-732
• /
• 2007

This paper presents the final configuration of test field and test items for the application of IEC 60364-4-44 in Korea. IEC 60364-4-44 provides rules for the protection against the effects of conducted and radiated disturbances on electrical installations. Especially this standard deals with the protection of low voltage facility against the ground fault in the high voltage side of power distribution system. Many countries define the regulations on the use of electrical facilities based on their own power system and technical references which are considered to be suitable for them. The background of circuit of IEC 60364-4-44 is based on the ungrounded system as most of European countries. However, domestic electric power distribution system is based on multi-grounding system different from European system. Therefore, it is necessary to evaluate or prove the effect of the IEC 60364-4-44 for introducing and applying it to the domestic grounding system as a national standard. The authors with KEA(Korea Electric Association) carried out a project on the application of IEC 60364-4-44 to Korean electrical installations of buildings sponsored by Korean ministry of commerce, industry and energy for three years(2004.4.1$\sim$2007.3.31). The test field is established in K.E.R.I.(Korea Electrotechnology Research Institute), which is the purpose of evaluating the formula to calculate touch voltage and stress voltage in the IEC standards. This paper presents some considerations and final configuration of test field to evaluate and introduce the IEC 60364-4-44 applicable to domestic rule for the protection against ground fault.

• Korean Institute of Interior Design Journal
• /
• v.25 no.2
• /
• pp.59-69
• /
• 2016

This study aimed to understand the importance of applying finishing materials into interior space, and to add meaning to the creation of functional space, associated interior finishing materials with brain science. To achieve this purpose, brainwave(EEG) experiment was conducted. The brainwave appearing when sensing the surface of interior finishing materials with hands was measured. The locations of the electrode were FP1, FP2, F3, F4, C3, C4, P3, P4, O1, O2, F7, F8, T3, T4, T5, T6, CZ, FZ, and PZ and in addition to these, AFZ was added. Eight(8) kinds of finishing materials: metallic material, film paper, lumbar, stone, glass, silk wallpaper, fabric, and paint were used to measure '${\alpha}$-wave against ${\beta}$ wave.' As a result, it was found that the most activated finishing material in term of relaxation was film paper, followed by metallic, glass, paint, fabric, stone, lumbar, and silk wallpaper. To explain in light of this, (1) '${\alpha}$-wave against ${\beta}$ wave' was the most activated at ch1-FP1 and ch2-FP2, and at ch17-AFZ and ch19-FZ, which indicated that metopic-prefrontal lobe showed the highest activation in relaxation. Film paper, among the finishing materials, showed the highest increase in relaxation. (2) In general, '${\alpha}$-wave against ${\beta}$ wave' relaxation was inhibited at ch13-T3 and ch14-T4, and at ch15-T5 and ch16-T6 and the arousal in the temporal lobe was prominent. Silk wallpaper, among the finishing materials, showed the highest arounsal effect. As a result of measuring the superficial touch on the silk wallpaper, which was regarded as the most rough material among the eight finishing materials, the arousal effect of ${\alpha}$-wave against ${\beta}$-wave, among the brainwave characteristics, was found to be the highest. (3) to judge from the scope of this experiment regarding the tactile sensation over the finishing materials, it is considered that the brainwave reaction sometimes appeared contrastive depending on whether the surface was smooth or rough and there also appeared a difference in relaxation and arousal reaction of the brainwave depending on whether the surface was hot or cold, but the sensation on the surface texture was often evaluated differently depending on who you were. For this reason, this study has some limitations.