• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.349-355
• /
• 2015

A fully-differential touch-screen sensing architecture is presented to improve noise immunity and also support most multi-touch events minimizing the number of amplifiers and their silicon area. A correlated double sampling function is incorporated to reduce DC offset and low-frequency noises, and a stabilizer circuit is also embedded to minimize inherent transient fluctuations. A prototype of the proposed readout circuit was fabricated in a $0.18{\mu}m$ CMOS process and its differential operation in response to various touch events was experimentally verified. With a 3.3 V supply, the current dissipation was 3.4 mA at normal operation and $140{\mu}A$ in standby mode.

• 산업기술연구
• /
• 제30권A호
• /
• pp.25-29
• /
• 2010

In this paper, we implement a multi-touch system using FIDR. The implementation consists of hardware manufacture and development of image processing system. In the hardware system, touch screen, infrared LED placements and infrared camera are made. The image processing procedure is to extract each pointer's coordinates from image data and includes binary-coding, noise-elimination, labeling and calculation of mass center. From the implementation, we are able to make a multi-touch system with considerably lower cost than the existing ones.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.391-394
• /
• 2005

This paper describes the touch voltages and potential distributions according to the distance between distribution concrete pole and ground rod when the current is injected to a ground rod through overhead ground wire. Touch voltage is measured in four directions. The touch voltage and ground potential distribution per 1 A are analyzed. The touch voltage was the highest at the around surface just above the ground rod.

• International Journal of Safety
• /
• 제9권2호
• /
• pp.1-5
• /
• 2010

In order to analyze the potential rise of ground surface of grounding grid installed in buildings, the grounding simulator has been designed and fabricated as substantial and economical measures. This paper describes the study of touch and step voltages with grounding grid where earth leakage current is injected. To assess risk voltage of grounding grid, the grounding simulator and CDEGS program were used to obtain measured data and theoretical results of this study. The grounding simulator was composed of an electrolytic tank, AC power supply, a movable potentiometer, and test grounding electrodes. The potential rise was measured by grounding simulator, and the touch and step voltages were computed by CDEGS program. As a consequence, the touch voltage and step voltage above the grounding grid were very low, but were significantly increased near the edge of grounding grid.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.773-779
• /
• 2013

We propose an efficient method to measure a pulse width using multiphase clock signals generated from a ring oscillator. These clocks, which have the same frequency and are evenly spaced, give multiple rising edges within a clock cycle. Thus, it is possible to measure a pulse width more accurately than with existing single clock-based methods. The proposed method is applied to a capacitive touch switch. Experimental results show that the capacitive touch switch with the proposed method gives a 118 fF resolution, which is 6.4 times higher than that of the touch switch with a single clock-based pulse width measurement method.

• 한국멀티미디어학회논문지
• /
• 제17권10호
• /
• pp.1213-1219
• /
• 2014

Keypad used in the portable terminal based on the touch screen such as current smart phones is complex on the input method because of placement for use a small screen on a character or number button and is inconvenient. In this paper, we propose a combination method for the Hangul through touch and drag. First, only keypad for consonants is displayed, if a single consonant is selected by touch, then the keypad for vowels will be displayed around the consonant. Dragging in the keypad is combined into a vowel by depending on the drag path. This method can input Hangul by rapid and intuitive process compared to conventional methods. Simulation results show that the proposed method is very efficient in terms of speed and convenience compared to the conventional methods.

• 한국전문물리치료학회지
• /
• 제4권2호
• /
• pp.10-17
• /
• 1997

The purpose of this study were to compare light touch, two-point discrimination, position sense, and static balance ability and to examine the relationship of static balance ability and different senses in those who are wearing various heights of high-heeled shoes. Each 29 women was classified two different heights (below 3 cm, above 7 cm) by experience in wearing shoes. A t-test was used to determine the differences between low- and high-heeled shoe in light touch, two-point discrimination, position sense, and static balance ability. Pearson correlation was used to examine the relationship of static balance ability to these sensation. The results were as follows: 1) No significant differences in average light touch, position sense between two groups were found(p>0.05). But significant differences in average two-point discrimination, static balance ability were found(p<0.05). 2) Static balance ability was not significantly correlated with light touch, position sense, two-point discrimination(p>0.05). The results suggest that long time experience in wearing high-heeled shoe may be caused local sensory change and decreased static balance ability. Even though, static balance ability was not significantly affected but correlated with two-point discrimination, position sense, and light touch in order.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.1-13
• /
• 2011

The recent spotlight on electronic touch-screen display, a rapid breakthrough in the information society is evolving. Touch panel input device such as a keyboard or mouse without the use of, the on-screen character or a specific location or object on the person's hand touches a particular feature to identify the location of a panel is to be handled. The touch screen on the touch panel is used in the Ag paste is used mostly for low-curable paste. The thermal-curing paste according to the drying process of thermal energy consumption and improve the working environment of organic solvents have problems. In this study, Ag paste used in the non-thermal curing friendly and cost-effective UV curable paste was prepared. Current commercially available thermal-curable binder, was used instead of the flow characteristics of UV-curable oligomers and monomers with functional groups to give a single conductive Ag paste with the addition of a pattern could be formed. Ag paste as a result, thermal-curing adhesive, hardness, resistance and excellent reproduction of fine patterns and was available with screen printing environmentally friendly could see its potential as a patterning technology.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.188-195
• /
• 2015

This paper presents measurement error reduction technique of touch and step voltage of grounding system based on numerical analysis. When measuring touch and step voltage of grounding system, auxiliary current probes should be located at suitable places. However, the auxiliary probes can not be located at suitable places in such cases as there are buildings and pavements. Therefore, in this paper, we provided measurement error reduction technique of touch and step voltage of grounding system according to the positions of auxiliary probes and angle between auxiliary probes. Also, measurement error analyses of touch and step voltage of grounding system have been conducted using more than one current probe. Based on these analyses, recommended positions of auxiliary probes within allowable measurement errors were presented.

• 한국산업정보학회논문지
• /
• 제16권3호
• /
• pp.65-72
• /
• 2011

멀티터치 디스플레이 시스템은 참여자가 별도의 부가장치 없이 다양한 인터랙티브 미디어에 손쉽게 접근할 수 있는 기술로 최근 큰 각광을 받고 있다. 특히 마이크로소프트사의 서피스 (Microsoft Surface)와 같이 벽면형 디스플레이 이외에 원형의 디스플레이 상에서의 멀티터치 기술이 상용화됨에 따라 보다 다양한 형태의 탠저블 인터페이스로서의 가능성을 보였다. 본 논문 에서는 이를 확장하여 구형이 아닌 볼록형(Convex) 불규칙 표면을 대상으로 영상을 디스플레이 하고 디스플레이된 콘텐츠와 참여자의 상호작용이 가능한 멀티터치 인터랙션 시스템을 제안한다. 이러한 제안 방법은 각종 탠져블 인터페이스, 예를 들어 디오라마 기반의 전시 시스템이나 체감형 아케이드 게임에서 효율적으로 사용될 수 있다.