• 한국광학회지
• /
• 제20권1호
• /
• pp.57-60
• /
• 2009

CMOS 이미지 센서의 수광 효율을 높이기 위해서 픽셀의 광 통로 벽에 광학 박막의 도입을 제안하고자 한다. Essential Macleod를 이용하여 시뮬레이션해 본 결과, 전반사가 일어나는 범위가 현저히 증가하였다. 특히 공기 박막을 도입할 경우에, 그 효과가 가장 현저하여, 광 통로 벽에서의 전반사 임계각이 50도로까지 확대되었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.120-129
• /
• 2002

New method and device for the on-line measurement of soot concentration in a diesel engine oil are proposed, where the measurement principle is based mainly on attenuated internal total reflection. Various laboratory tests of the detector were performed mainly with carbon black particles of different contamination levels. It was found that the proposed detector could be well used to monitor oil deterioration due to soot contamination. Operational range of the detector was found from 0 to 5 mass percentage of soot content. Test results with water and fuel dilution showed that these effects were not remarkable. However, adsorption of carbon black particles to a measurement surface was considered to be a critical problem in the new detector. Effects of particle deposition onto the interface was experimentally evaluated with the oil temperature and turbulence and discussed throughout this work.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.123-128
• /
• 2010

We have investigated the properties of the novel triangular ring resonator with the total internal reflection mirrors and the semiconductor optical amplifier for photonic integrated circuits (PIC). A novel triangular resonators containing active and passive sections are fabricated and characterized with various multimode interference (MMI) lengths. The optimum MMI length and width turn out to be 108 and 9 ${\mu}m$, respectively. A free spectral range of approximately 228 GHz is observed near 1558 nm along with an on-off ratio of 9 dB. The proposed triangular resonator has a good advantage to remove the direct coupling between the two access waveguides of the MMI coupler. Hence, such resonators can be directly integrated with other devices making compact and highly functional PIC possible.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.36-41
• /
• 2012

Polymethylmethacrylate powders are commonly used to improve the spreadability and blurring effects of powder foundation cosmetics. In this study, the opacity and haze effect of four types of polymethylmethacrylate powders and their 10wt% powder foundation formulation was evaluated. The distorted random hemispherical particulates with both concave and convex portions showed the highest haze and opacity value as a single powder substance. And as a formulated phase, the powder foundation formulation containing particulates with fine pores provided the highest haze and opacity value. We also examined the quantity of reflected light over the angular range $20-75^{\circ}$ by polarized light goniophotometry. The total reflected light intensity, surface-reflected light, and internally reflected light were characterized. These studies demonstrated that hemispherical PMMA powders produce natural brilliance by creating high internally reflected light which is similar to the total reflection profile of artificial skin.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.553-560
• /
• 2007

본 논문에서는 양손의 터치를 인식하여 실시간 상호작용이 가능한 테이블 탑 디스플레이 시스템 및 구현 알고리즘에 대해 기술한다. 제안하는 시스템은 FTIR(Frustrated Total Internal Reflection) 메커니즘을 기반으로 제작되었으며 multi-touch, multi-user 방식의 손 제스처 입력이 가능하다. 시스템은 크게 영상 투영을 위한 빔-프로젝터, 적외선 LED를 부착한 아크릴 스크린, Diffuser 그리고 영상을 획득하기 위한 적외선 카메라로 구성되어 있다. 시스템 제어에 필요한 제스처 명령어 종류는 상호작용 테이블에서의 입력과 출력의 자유도를 분석하고 편리함, 의사소통, 항상성, 완벽함의 정도를 고려하여 규정하였다. 규정된 제스처는 사용자가 상호작용을 위해 스크린에 접촉한 손가락의 개수, 위치, 그리고 움직임 변화를 기준으로 세분화된다. 적외선 카메라를 통해 입력받은 영상은 잡음제거 및 손가락 영역 탐색을 위해 간단한 모폴로지 기법이 적용된 후 인식과정에 들어간다. 인식 과정에서는 입력 받은 제스처 명령어들을 미리 정의해놓은 손 제스처 모델과 비교하여 인식을 행한다. 세부적으로는 먼저 스크린에 접촉된 손가락의 개수를 파악하고 그 영역을 결정하며 그 후 그 영역들의 중심점을 추출하여 그들의 각도 및 유클리디언 거리를 계산한다. 그리고 나서 멀티터치 포인트의 위치 변화값을 미리 정의해둔 모델의 정보와 비교를 한다. 본 논문에서 제안하는 시스템의 효율성은 Google-earth를 제어하는 것을 통해 입증될 수 있다.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.793-798
• /
• 2009

In this paper, the simulation and optimization of SRH (Surface Relief Hologram) masks for printing LCD gate patterns using TIR (Total Internal Reflection) holographic lithography was investigated. A simulation and optimization algorithm based on SDTA (Scalar Diffraction Theory Analysis) method was developed. The accuracy of the algorithm was compared to that of the RCWA (Rigorous Coupled Wave Analysis) method for estimating the Fresnel diffraction pattern of Cr amplitude masks for the given system geometry. In addition, the results from the optimization algorithm were validated experimentally. It was found that one to the most important conditions for the fabrication of SRH masks is to avoid nonlinear shape distortions of the resulting grating. These distortions can be avoided by designing SRH masks with recorded gratings having small aspect ratios of width versus depth. The optimum gap size between the Cr and SRH masks was found using the optimization algorithm. A printed LCD gate pattern with a minimum line width of $1.5{\mu}m$ exposed using the optimized SRH mask was experimentally demonstrated.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.614-622
• /
• 2016

In this paper, we propose a novel differential equation method for designing a total internal reflection (TIR) LED lens with double freeform surfaces. A complete set of simultaneous differential equations for the method is derived from the condition for minimizing the Fresnel loss, illumination models, Snell’s Law of ray propagation, and a new constraint on the incident angle of a ray on the light-exiting surface of the lens. The last constraint is essential to complete the set of simultaneous differential equations. By adopting the TIR structure and applying the condition for minimizing the Fresnel loss, it is expected that the proposed TIR LED lens can have a high luminous flux efficiency, even though its beam-spread angle is narrow. To validate the proposed method, three TIR LED lenses with beam-spread angles of less than 22.6° have been designed, and their performances evaluated by ray tracing. Their luminous flux efficiencies could be obviously increased by at least 35% and 5%, compared to conventional LED lenses with a single freeform surface and with double freeform surfaces, respectively.

• 한국전자파학회논문지
• /
• 제22권3호
• /
• pp.320-326
• /
• 2011

공진되는 개구와 비공진 개구로 구성되는 두 가지 형태의 FSS 구조에 대해 전부 투과되는 응답을 비교 연구하였다. 입사파가 전부 투과할 때 공진 개구의 FSS 구조는 파장 ${\lambda}$ 대 배열 주기 T의 비에 대해 비공진 개구의 FSS인 경우보다 더 큰 비를 가짐을 알 수 있었고, 또한 동작 주파수는 공진 구조를 이용함에 의해 상당히 낮출 수 있다. 이러한 물리적 상황은 현재 물리학 분야에서 널리 연구되고 있는 공진형의 특이한 광투과 현상과 유사한 성질을 지닌다고 사료된다.

• 한국재료학회지
• /
• 제32권6호
• /
• pp.293-300
• /
• 2022

This study investigated a graded-refractive-index (GRIN) coating pattern capable of improving the light extraction efficiency of GaN light-emitting diodes (LEDs). The planar LEDs had total internal reflection thanks to the large difference in refractive index between the LED semiconductor and the surrounding medium (air). The main goal of this paper was to reduce the trapped light inside the LED by controlling the refractive index using various compositions of (TiO₂)_x(SiO₂)_1-x in GRIN LEDs consisting of five dielectric layers. Several types of multilayer LEDs were simulated and it was determined the transmittance value of the LEDs with many layers was greater than the LEDs with less layers. Then, the specific ranges of incident angles of the individual layers which depend on the refractive index were evaluated. According to theoretical calculations, the light extraction efficiency (LEE) of the five-layer GRIN is 25.29 %, 28.54 % and 30.22 %, respectively. Consequently, the five-layer GRIN LEDs patterned enhancement outcome LEE over the reference planar LEDs. The results suggest the increased light extraction efficiency is related to the loss of Fresnel transmission and the release of the light mode trapped inside the LED chip by the graded-refractive-index.

• 중환자간호학회지
• /
• 제16권3호
• /
• pp.87-98
• /
• 2023

Purpose : This descriptive survey investigated the effects of clinical nurses' critical reflection competency, professional pride, and person-centered care practices on patient safety management activities. Methods : The participants were 183 clinical nurses working at a tertiary hospital in South Korea. The questionnaires consisted of the Critical Reflection Competency Scale for Clinical Nurses Professional Pride the Person-Centered Nursing Assessment Tool and Patient Safety Management Activities. The collected data were analyzed using descriptive statistics, t-tests, ANOVA, Tukey's HSD, Pearson's correlation coefficient, and multiple regression using SPSS 29.0. Results : The mean score for patient safety management activities was 4.65±0.34 out of 5. There were significant differences in patient safety management activities according to age (F=3.90, p =.010), education level (t=-2.56, p =.013), total work experience (F=3.87, p =.010), and the number of healthcare accreditation system experiences (F=5.22, p =.006). Patient safety management activities were positively correlated with critical reflection competency (r=.337, p <.001), professional pride (r=.271, p <.001), and person-centered care practices (r=.399, p <.001). The results indicated that person-centered care practices affected patient safety management activities (𝛽=.358, p <.001) with the explanatory power of 22.5%. Conclusion : To improve clinical nurses' patient safety management activities, it is necessary to develop participatory educational programs that can integrate skills and attitudes based on conceptual knowledge of person-centered care. Intervention studies are needed to test the effect of person-centered care on patient safety when applied in clinical practice.