• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.22-23
• /
• 2005

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.57-67
• /
• 2013

The incompletion of TIR (Total Internal Reflection) in FTIR (Frustrated Total Internal Reflection) touch screen has been investigated as follows. Assuming a 3 layer thin film of medium1 ($n_1$)-medium2 ($n_2$)-medium3 ($n_3$) with refraction indices of $n_1=n_3{\neq}n_2$, it was theoretically proven that FTIR or OT (ordinary transmission) phenomena might happen through medium2 from medium1 to medium3 relying on relative difference in $n_1(=n_3)$ and $n_2$, and that the formulae for FTIR and OT could be transformed into each other depending on the number state (imaginary or real) of the light wave phase. In parallel to the theoretical analysis, the incompletion of TIR in acrylate due to external contacts was also elucidated from the experimental and phenomenological viewpoints. On the basis of this considerate work, we explained how to improve the touching performance for better FTIR touch screen.

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.334-338
• /
• 2009

Recently, with increasing demand for flat-panel display product, methods for large area patterning are required. TIR (total internal reflection) holographic photo-lithography isstudied as one of the methods of large area lithography. In conventional TIR holography, light sources for hologram recording and image reconstruction are coherent beams such as laser beams. If the image is reconstructed with an incoherent light source such a UV lamp, the image noise from the coherence of light will be reduced and the UV lamp will be a better light source for large area exposure. We analyzed the effect of spectral bandwidth and angular bandwidth of the light source in image reconstruction and verified image blurring with experiments. For large area patterning which has micro-scale line width, it is expected that TIR holographic photo lithography by UV lamp will become a low-noise and low-priced technique.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.73-84
• /
• 2012

The transfer mechanism of optical information at the interface of air and glass (the air-glass IF) has been investigated by thoroughly fulfilling the theoretical and experimental analyses regarding the FTIR (Frustrated Total Internal Reflection) and moisture effects on the fingerprint onto a glass cup with water. As for the fingerprint onto a glass cup with water its image was observed to be very vivid, which turned out to be due to the difference between the two light intensities reflected on the air-glass IF and the wet fingerprint ridge by manipulating the optical theories such as Fresnel relation, Snell's law, FTIR, GT (general transmission) and so on. In addition, the experimental inspection for FTIR and moisture effects on the fingerprint image also evidenced the fact that the vivid fingerprint image originated from the moisture effect rather than the FTIR phenomenon.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.141-142
• /
• 2008

In order to develop a simple ray tracing model for simulating the radiation pattern of a LED, the propagation of a ray within the LED capsule was systematically evaluated by considering refraction and reflection from the capsule-air interface, multiple reflection within the capsule, and total internal reflection at the boundary. It was found that concentric ring shapes on the radiation pattern was formed by the rays multiple-reflected from the capsule surface, and that the strength of these rays were decreased rapidly as the number of multiple reflection is increased.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.156-157
• /
• 2000

The amplification method using evanescent wave coupling has a long history and has been widely used as a new lasing method, especially, in the waveguide optics$^{(1)}$ . In particular, it has been observed experimentally that when the light wave propagating in a dielectric medium is totally reflected at the planar interface between the dielectric and a pumped active medium, the reflectance may be greater than unity, i.e., amplification is possible$^{(2)}$ . There were several attempts by other authors to explain this enhanced internal reflection (EIR) classically$^{(3)}$ . They commonly introduced a complex refractive index for the active medium with its imaginary part being negative, and this scheme was also used to describe an amplification process in a waveguide having active-cladding region$^{(4)}$ . However these theories are phenomenological, using macroscopic constants, and therefore a microscopic theory is needed to understand EIR in a fundamental level. (omitted)

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.57-60
• /
• 2009

We consider introducing an optical thin film to the light guiding wall of a pixel in order to enhance the light guiding efficiency of a CMOS image sensor. Simulating the reflectance as a function of the incidence angle using the Essential Macleod program, we find that the range of total internal reflection is greatly increased for several materials. Particularly when air is chosen as the thin film material, the critical angle of total internal reflection could be shifted to about 50 degrees.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.120-129
• /
• 2002

New method and device for the on-line measurement of soot concentration in a diesel engine oil are proposed, where the measurement principle is based mainly on attenuated internal total reflection. Various laboratory tests of the detector were performed mainly with carbon black particles of different contamination levels. It was found that the proposed detector could be well used to monitor oil deterioration due to soot contamination. Operational range of the detector was found from 0 to 5 mass percentage of soot content. Test results with water and fuel dilution showed that these effects were not remarkable. However, adsorption of carbon black particles to a measurement surface was considered to be a critical problem in the new detector. Effects of particle deposition onto the interface was experimentally evaluated with the oil temperature and turbulence and discussed throughout this work.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.123-128
• /
• 2010

We have investigated the properties of the novel triangular ring resonator with the total internal reflection mirrors and the semiconductor optical amplifier for photonic integrated circuits (PIC). A novel triangular resonators containing active and passive sections are fabricated and characterized with various multimode interference (MMI) lengths. The optimum MMI length and width turn out to be 108 and 9 ${\mu}m$, respectively. A free spectral range of approximately 228 GHz is observed near 1558 nm along with an on-off ratio of 9 dB. The proposed triangular resonator has a good advantage to remove the direct coupling between the two access waveguides of the MMI coupler. Hence, such resonators can be directly integrated with other devices making compact and highly functional PIC possible.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.553-560
• /
• 2007

본 논문에서는 양손의 터치를 인식하여 실시간 상호작용이 가능한 테이블 탑 디스플레이 시스템 및 구현 알고리즘에 대해 기술한다. 제안하는 시스템은 FTIR(Frustrated Total Internal Reflection) 메커니즘을 기반으로 제작되었으며 multi-touch, multi-user 방식의 손 제스처 입력이 가능하다. 시스템은 크게 영상 투영을 위한 빔-프로젝터, 적외선 LED를 부착한 아크릴 스크린, Diffuser 그리고 영상을 획득하기 위한 적외선 카메라로 구성되어 있다. 시스템 제어에 필요한 제스처 명령어 종류는 상호작용 테이블에서의 입력과 출력의 자유도를 분석하고 편리함, 의사소통, 항상성, 완벽함의 정도를 고려하여 규정하였다. 규정된 제스처는 사용자가 상호작용을 위해 스크린에 접촉한 손가락의 개수, 위치, 그리고 움직임 변화를 기준으로 세분화된다. 적외선 카메라를 통해 입력받은 영상은 잡음제거 및 손가락 영역 탐색을 위해 간단한 모폴로지 기법이 적용된 후 인식과정에 들어간다. 인식 과정에서는 입력 받은 제스처 명령어들을 미리 정의해놓은 손 제스처 모델과 비교하여 인식을 행한다. 세부적으로는 먼저 스크린에 접촉된 손가락의 개수를 파악하고 그 영역을 결정하며 그 후 그 영역들의 중심점을 추출하여 그들의 각도 및 유클리디언 거리를 계산한다. 그리고 나서 멀티터치 포인트의 위치 변화값을 미리 정의해둔 모델의 정보와 비교를 한다. 본 논문에서 제안하는 시스템의 효율성은 Google-earth를 제어하는 것을 통해 입증될 수 있다.