• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.508-519
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.940-949
• /
• 2013

In this paper, wrinkle reduction design was studied for triangular sail. Wrinkles in the solar sail membrane can change the load path and surface topology which may have an adverse effect on propulsion performance and controllability. In this study, wrinkle reduction strategies of adjusting cable angle, catenary and catenary-wire schemes were considered and the design parameters for wrinkle reduction were systematically investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2246-2267
• /
• 2013

BitTorrent is one of the most important applications in the current Internet. Despite of its interest, we still have little knowledge regarding the connectivity properties of real BitTorrent swarms. In this paper we leverage a dataset including the connectivity information of 250 real torrents and more than 150k peers to carefully study the connectivity properties of peers. The main topology parameters of the studied swarms suggest that they are significantly less resilient than random graphs. The analysis of the peer level connectivity properties reveals that peers continuously change more than half of their neighbours. Furthermore, we also find that a leecher typically keeps stable connections with a handful of neighbours with which it exchanges most of its traffic whereas seeders do not establish long-term connections with any peer so that they can homogeneously distribute chunks among leechers. Finally, we have discovered that a significant portion of the studied peers (45%) have an important locality-biased neighbourhood composition.

• Journal of Information Technology Applications and Management
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2007

The ubiquitous computing system is expected to be widely utilized in digital home, logistics control, environment/disaster management, medical/health-care services and other applications. The ubiquitous sensor network (USN) is a key infra-structure of this system. Nodes in the USN are exposed to adverse environments and required to perform their missions with very limited power supply only. Also the sensor network is composed of much more nodes. In case some node consumes up its power capacity under a certain required level, the network topology should change and re-routing/ re-transmission of data is necessitated. Resultantly communication protocols studied for conventional wireless networks or ad-hoc networks are not suitable for the sensor network. Schemes should be devised to control the efficient usage of node power in the sensor network. This paper proposes a routing algorithm to enhance the efficiency of power consumption for USN node and analyzes its performance by simulation.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.195-197
• /
• 2001

This paper presents the circuit modeling and Control methods of PWM DC/DC Converter with Isolated dual outputs. The dual output converter topology is consisted of the two switch and single secondary winding. The control algorithm which is used by an adjusted PI control methods, of Dual Output PWM DC/DC converter is proposed in this paper. The proposed adjusted PI control method has faster response characteristics than conventional PI control methods at load change. The validity of the proposed adjusted control method is verified with the several interesting simulation results.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2755-2757
• /
• 2002

In this paper, we propose a now architecture for hardware implementation of digital neural network. By adopting flexible ladder-style bus and internal connection network into traditional SIMD-type digital neural network architecture, the proposed architecture enables fast processing that is based on parallelism, while does not abandon the flexibility and extensibility of the traditional approach. In the proposed architecture, users can change the network topology by setting configuration registers. Such reconfigurability on hardware allows enough usability like software simulation. We implement the proposed design on real FPGA, and configure the chip to multi-layer perceptron with back propagation for alphabet recognition problem. Performance comparison with its software counterpart shows its value in the aspect of performance and flexibility.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.2
• /
• pp.71-81
• /
• 1993

Thed effects of Ar or Oxygen RF plasma treatment on the adhesion behavior of Cr films to polyimide sub-strates have been investigated by using SEM, XRD, AES, and $90^{\circ}$peel test. By applying RF plasma treatment of the polyimide surface prior to metal deposition, the peel adhesion strength of Cu/Cr films sputtered onto the fully cured BPDA-PDA polyimide was highly increased from about 3g/mm to 90 ~ 100g/mm. Improved peel adhesion strength of Cr/polyimide interfaces due to RF plasma treatment was attributed to the contributions from surface cleaning, Cr-polyimide bonding at the interface, and force required for plastic deformation of the film. While the surface topology change of the polyimide caused by RF plasma treatment makes a little contri-bution to the improved adhesion.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.173-176
• /
• 2001

In this treatise information communication indust based change phenomenon of payment system of money explain and study and compare way ago value that use electronic comnunity of the world and presented correct electron money model in real condition of our country. Draw payment way that consider particular situation and korean situation and that wi introduce electron money model of the world and analyze merits and demerits and is money here upon. Electron money introduction of smart card way that support all off-line and on-line that I currency and the nearest topology here direction must is insisting and relate in use of this or presenting value of money flowchart and draw the validity and hangup by introducing electronic mono model who is presenting in Kyong-gi Province and Su-won current and go forward group. Proposed suitable electron money system in Korea situation by proposing money form and model of payment system that can satisfy all this at 1 situation and physical special quality of mon by conclusion and clarify flow of the value.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.524-530
• /
• 2013

In this study, we describe the most expected behavior of cells on the modified surface and the correlation between the modified substrates and the response of cells. The physicochemical characteristics of substrates played an essential role in the adhesion and proliferation of cells. Glass and polymer substrates were modified using air plasma oxidation, and the surfaces were coated with self-assembled monolayer molecules of silanes. The PDMS substrates embedded with parallel micropatterns were used for evaluation of the effect of topologically modified substrate on cellular behaviour. BALB/3T3 fibroblast cells were cultured on different surfaces with distinct wettability and topology, and the growth rates and morphological change of cells were analyzed. Finally, we found the optimum conditions for the adhesion and proliferation of cells on the modified surface. This study will provide insight into the cell-surface interaction and contribute to tissue engineering applications.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.4
• /
• pp.217-224
• /
• 2009

Most divide-and-conquer implementations for Delaunay triangulation utilize quad-edge or winged-edge data structure since triangles are frequently deleted and created during the merge process. How-ever, the proposed divide-and-conquer algorithm utilizes the array based data structure that is much simpler than the quad-edge data structure and requires less memory allocation. The proposed algorithm has two important features. Firstly, the information of space partitioning is represented as a permutation vector sequence in a vertices array, thus no additional data is required for the space partitioning. The permutation vector represents adaptively divided regions in two dimensions. The two-dimensional partitioning of the space is more efficient than one-dimensional partitioning in the merge process. Secondly, there is no deletion of edge in merge process and thus no bookkeeping of complex intermediate state for topology change is necessary. The algorithm is described in a compact manner with the proposed data structures and operators so that it can be easily implemented with computational efficiency.