• Computers and Concrete
• /
• 제28권5호
• /
• pp.487-495
• /
• 2021

The use of prestressed concrete box girder bridges built by segmentally balanced cantilevers has bloomed in the last decades due to its significant structural and construction advantages in complex topographies. In Colombia, this typology is the most common solution for structures with spans ranging of 80-200 m. Despite its popularity, excessive deflections in bridges worldwide evidenced that time-dependent effects were underestimated. This problem has led to the constant updating of the creep and shrinkage models in international code standards. Differences observed between design processes of box girder bridges of the Colombian code and Eurocode, led to the need for a validation of in-service status of these structures. This study analyzes the long-term behavior of the Tablazo bridge with data scarcity. The measured leveling of this structure is compared with a finite-element model that consider the most widely used creep and shrinkage models in the literature. Finally, an adjusted model evidence excessive deflection on the bridge after six years. Monitoring of this bridge typology in Colombia and updating of the current design code is recommended.

• 한국수자원학회논문집
• /
• 제55권9호
• /
• pp.645-655
• /
• 2022

최근 동해안 해수욕장에서도 여름철 해수욕 기간에 이안류가 자주 관찰되고 있다. 우리나라 동해안에 위치한 해수욕장들에서 발생하는 이안류의 원인 특성을 수치모의 결과를 이용하여 검토하였다. 속초, 낙산, 경포대, 망상 해수욕장 앞바다의 수심자료를 이용하여 Boussinesq 방정식을 지배 방정식으로 하는 FUNWAVE 모형으로 수치모의를 수행하였다. 각 해수욕장 앞바다 지형, 샌드바 형성 및 입사파 특성 등의 영향으로 변형되는 위상의 상호작용을 포함한 파의 횡방향 비균등성에 의해 발생하는 이안류가 잘 재현되었다. 그 결과를 기반으로 각 해수욕장에서 발생 가능한 이안류의 종류를 기술하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.223-223
• /
• 2012

Surface engineering plays a significant role in fabricating highly functionalized materials applicable to industrial and biomedical fields. Surface wrinkles and folds formed by ion beam or plasma treatment are buckling-induced patterns and controlled formation of those patterns has recently gained considerable attention as a way of creating well-defined surface topographies for a wide range of applications. Surface wrinkles and folds can be observed when a stiff thin layer attached to a compliant substrate undergoes compression and plasma treatment is one of the techniques that can form stiff thin layers on compliant polymeric substrates, such as poly (dimethylsiloxane) (PDMS). Here, we report two effective methods using plasma modification techniques for controlling the formation of surface wrinkles and folds on flat or patterned PDMS substrates. First, we show a method of creating wrinkled diamond-like carbon (DLC) film on grooved PDMS substrates. Grooved PDMS substrates fabricated by a molding method using a grooved master prepared by photolithography and a dry etching process were treated with argon plasma and subsequently coated with DLC film, which resulted in the formation of wrinkled DLC film aligning perpendicular to the steps of the pre-patterned ridges. The wavelength and the amplitude of the wrinkled DLC film exhibited variation in the submicron- to micron-scale range according to the duration of argon plasma pre-treatment. Second, we present a method for controlled formation of folds on flat PDMS substrates treated with oxygen plasma under large compressive strains. Flat PDMS substrates were strained uniaxially and then treated with oxygen plasma, resulting in the formation of surface wrinkles at smaller strain levels, which evolved into surface folds at larger strain levels. Our results demonstrate that we can control the formation and evolution of surface folds simply by controlling the pre-strain applied to the substrates and/or the duration of oxygen plasma treatment.

• The Journal of Advanced Prosthodontics
• /
• 제8권2호
• /
• pp.75-84
• /
• 2016

PURPOSE. To evaluate the effect of various surface treatments on the surface structure and shear bond strength (SBS) of different ceramics. MATERIALS AND METHODS. 288 specimens (lithium-disilicate, leucite-reinforced, and glass infiltrated zirconia) were first divided into two groups according to the resin cement used, and were later divided into four groups according to the given surface treatments: G1 (hydrofluoric acid (HF)+silane), G2 (silane alone-no heat-treatment), G3 (silane alone-then dried with $60^{\circ}C$ heat-treatment), and G4 (silane alonethen dried with $100^{\circ}C$ heat-treatment). Two different adhesive luting systems were applied onto the ceramic discs in all groups. SBS (in MPa) was calculated from the failure load per bonded area (in $N/mm^2$). Subsequently, one specimen from each group was prepared for SEM evaluation of the separated-resin-ceramic interface. RESULTS. SBS values of G1 were significantly higher than those of the other groups in the lithium disilicate ceramic and leucite reinforced ceramic, and the SBS values of G4 and G1 were significantly higher than those of G2 and G3 in glass infiltrated zirconia. The three-way ANOVA revealed that the SBS values were significantly affected by the type of resin cement (P<.001). FIN ceramics had the highest rate of cohesive failure on the ceramic surfaces than other ceramic groups. AFM images showed that the surface treatment groups exhibited similar topographies, except the group treated with HF. CONCLUSION. The heat treatment was not sufficient to achieve high SBS values as compared with HF acid etching. The surface topography of ceramics was affected by surface treatments.

• Wind and Structures
• /
• 제22권4호
• /
• pp.477-501
• /
• 2016

Though hilly topography influences both wind speeds and directions aloft, only the influence on wind speeds, i.e. the speed-up effect, has been thoroughly investigated. Due to the importance of a model showing the spatial variations of wind directions above hilly terrains, it is worthwhile to systematically assess the applicability and limitations of the model describing the influence of hilly topographies on wind directions. Based on wind-tunnel test results, a model, which describes the horizontal and vertical variations of the wind directions separately, has been proposed in a companion paper. CFD (Computational Fluid Dynamics) techniques were employed in the present paper to evaluate the applicability of the proposed model. From the investigation, it has been found that the model is acceptable for describing the vertical variation of wind directions by a shallow hill whose primary-to-secondary axis ratio (aspect ratio) is larger than 1. When the overall hill slope exceeds $20^{\circ}$, the proposed model should be used with caution. When the aspect ratio is less than 1, the proposed model is less accurate in predicting the spatial variation of wind directions in the wake zone in a separated flow. In addition, it has been found that local slope of a hill has significant impact on the applicability of the proposed model. Specifically, the proposed model is only applicable when local slope of a hill varies gradually from 0 (at the hill foot) to the maximum value (at the mid-slope point) and then to 0 (at the hill top).

• 한국수산과학회지
• /
• 제25권2호
• /
• pp.151-163
• /
• 1992

황해, 동지나해와 제주도 주변해역의 해수분포의 계절변화를 살펴본 결과 이 해역전반에 걸쳐 공통된 계절변화가 보였다. 고온고염의 해수는 겨울에 황해 쪽으로 확장되며 여름에 동지나해 쪽으로 후퇴한다. 순압모델결과는 계절풍이 이와 같은 해수분포의 계절변화를 유도할 수 있음을 보여준다. 역풍류는 이 과정에서 중요한 역할을 하는데, 모델결과에는 역풍류의 축이 중국 쪽으로 이동되어 나타난다. 역풍류 축의 이동은 황해북부의 복잡한 해안선과 얕은 해저지형에 의한 에너지손실에 기인한다. 수치모델결과에 나타난 이동된 역풍류의 길은 여름철 황해저층냉수 남하의 길과 잘 일치한다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.239-239
• /
• 2006

In the present study, we synthesized CBDA-FDA and its analogue, poly(4,4' -(9,9-fluorenyl)diphenylene pyromellitimide) (PMDA-FDA), and then investigated quantitatively the orientational distributions of the polymer chain segments in the surfaces of their films by using linearly polarized Fourier transform infrared (FTIR) spectroscopy and optical retardation analysis. We also examined the films' surface topographies using high spatial resolution atomic force microscopy (AFM). Further, rubbed films were used to assemble antiparallel and $90^{\circ}-twisted$ nematic (TN) LC cells, and the alignment behaviors, pretilt angles and anchoring energies of the LC molecules in the cells were determined. The films were found to have very interesting surface morphologies and LC alignment behaviors, which have not previously been reported. The observed LC alignments, pretilt angles and anchoring energies are discussed by taking into account the interactions of the LC molecules with the oriented polymer chain segments and the surface morphologies.

• 한국토양비료학회지
• /
• 제49권4호
• /
• pp.310-317
• /
• 2016

This study aimed to evaluate the nutrient load balance from rice paddy fields with different topographies, alluvial plain and local valley. Continuous monitoring from May to September, 2013 was conducted for water quantification and qualification from alluvial plain in Yeoju region (32 ha) and local valley in Jincheon region (24 ha). The discharge rates of T-N from the alluvial plain were 57.2, 5.84, 22.7, and $5.20kg\;ha^{-1}$ for irrigation, precipitation, drainage, and percolation, respectively. In case of local valley, T-N loads were 34.6, 4.73, 21.1, and $4.15kg\;ha^{-1}$ for irrigation, precipitation, drainage, and percolation, respectively. In contrary, the T-P loads from the alluvial plain were 2.23, 2.22, 2.54, and $0.41kg\;ha^{-1}$ for irrigation, precipitation, drainage, and percolation, respectively. In case of local valley, T-P loads were 1.44, 1.57, 1.82, and $0.34kg\;ha^{-1}$ for irrigation, precipitation, drainage, and percolation, respectively. The nutrient contents in drainage water were influenced by the amount of waters, rainfall, and surface drainage water. The Pearson correlation analysis showed that rainfall was significantly correlated with nutrient loads from July to August due to the amount of runoff in local valley paddy field, and irrigation was related with nutrient loads of drainage from July to August. This study showed that paddy rice farming in alluvial plain and local valley might be beneficial to water quality protection.

• 한국지구과학회지
• /
• 제26권3호
• /
• pp.218-231
• /
• 2005

이 연구의 목적은 오대산 국립공원 일대의 지질 및 지형경관자원을 조사하여 그 특성을 분석하고, 이들 가운데 경관과 학술적으로 보존가치가 있는 지질 및 지형경관자원을 선정, 이들을 체계적으로 관리, 활용하는 방안에 필수적인 자료를 제시하고자 하는 것이다. 이 조사과정에서는 147개의 지질 및 지형경관자원을 조사하였다. 조사지역에서 가장 많이 관찰되는 지형은 구조지형이며, 다음으로는 풍화, 하천, 산지, 호소, 주빙하 지형 등이다. 다양한 지질 및 지형경관 자원 가운데 4개 노두가 관광자원으로 활용될 수 있고, 5개 노두는 학술연구를 위한 가치 있는 자원으로서 고려될 수 있다. 상기 조사자료는 관광지질학 활성화를 목적으로 지질관광 대상지역의 다양성 제고를 촉진하고, 국립공원관리공단 에서 탐방객에게 제공하는 자연해설 프로그램의 다양화와 기능성 제고를 배가하는데 유용할 것으로 판단된다.

• 한국수산과학회지
• /
• 제25권6호
• /
• pp.443-456
• /
• 1992

황해에서와 같은 선형의 양향성 대륙붕 해저 지형에서 저주파의 분산관계가 단주기$\cdot$단파까지 포함하는 장주기$\cdot$장파 경우에 대해 유도되었다. 선형의 양향성 대륙붕에서 장주기$\cdot$장파일 경우 Bessel 방정식이 유도되는데 비해 일반적인 경우에는 Hummer 방정식이 유도된다. Hummer 방정식의 해로 유도되는 confluent Hypergeometric 함수는 극한 경우에 여러 형태로 바뀐다. 단일한 대륙붕에서는 해안선과 수직한 방향의 대륵붕 규모가 Rossby deformation radius에 비해 많이 작을 때는 수평흐름의 수렴$\cdot$발산효과가 무시되지만 양향성 대륙붕에서는 수평흐름의 수린$\cdot$발산효과가 해안선과 수직한 방향의 대륙붕규모가 관계없이 파동역학에 결정적으로 중요하다. 수렴$\cdot$발산효과는 Kelvin 파를 포함시키며 대륙붕파의 파속을 감소시킨다. 끝으로 양향성 대륙붕의 비마찰 eigenfunction들의 직교가 증명되었다.