• Journal of Forest and Environmental Science
• /
• v.34 no.3
• /
• pp.246-248
• /
• 2018

Urban development and population have augmented the increase of impervious land-cover. This phenomenon has amplified the effects of climate change and increasing urban island effects due to increases in urban temperatures. Seoul, South Korea is one of the largest metropolitan cities in the world. While land uses in Seoul vary, land cover patterns have not changed much (under 2%) in the past 10 years, making the city a prime target for studying the effects of land cover types on the urban temperature. This research seeks to generalize the urban temperature of Seoul through a series of statistical tests using multi-temporal remote sensing data focusing on multiple scales and typologies of green space to determine its overall effectiveness in reducing the urban heat. The distribution of LST values was reduced as the size of urban forests increased. It means that changing temperature of large-scale green-spaces is less influenced because the broad distribution could be resulted in various external variables such as slope aspect, topographic height and density of planting areas, while small-scale urban forests are more affected from that. The large-scale green spaces contributed significantly to lowering urban temperature by showing a similar mean LST value. Both of concentration and dispersal of urban forests affected the reduction of urban temperature. Therefore, the findings of this research support that creating urban forests in an urban region could reduce urban temperature regardless of the scale.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.151-158
• /
• 1999

Offsite consequences resulting form worst-case scenarios involving release of toxic substances in the Yochon area were estimated using the ALOHA(Areal Locations of Hazardous Atmospheres) model. Eight toxic substances, including NH3, were considered; five were toxic gases and three were toxic liquids at ambient temperature. For toxic gases, the entire quantity was assumed to be released at a constant rate during a 10-minute period. For toxic liquids, the entire quantity stored in the tank was assumed to be spilled and spread and spread instantaneously to form a pool with a depth of 1cm, and then evaporated over some period of time. Except for phosgene and toluene 2,4-diisocyanate, for which concentration levels corresponding to human health effects are very low, average distances of the area at risk of adverse health effects for a 1- tom release were predicted to be $2.3{\pm}1.1 km$ for the worst-case meteorological conditions and $0.93{\pm}0.69km$ under typical meteorological conditions of the Yochon are. Because a large number of people were predicted to be affected in the current analysis, refined analyses considering both realistic accident scenarios and topographic effects were warranted.

• Wind and Structures
• /
• v.27 no.2
• /
• pp.123-136
• /
• 2018

The effects of steep and shallow hills on a stationary tornado-like vortex with a swirl ratio of 0.4 are simulated and quantified as Fractional Speed Up Ratios (FSUR) at three different locations of the vortex with respect to the crests of the hills. Steady state Reynolds Averaged Naiver Stokes (RANS) equations closed using Reynolds Stress Turbulence model are used to simulate stationary tornadoes. The tornado wind field obtained from the numerical simulations is first validated with previous experimental and numerical studies by comparing radial and tangential velocities, and ground static pressure. A modified fractional speed-up ratio (FSUR) evaluation technique, appropriate to the complexity of the tornadic flow, is then developed. The effects of the hill on the radial, tangential and vertical flow components are assessed. It is observed that the effect of the hill on the radial and vertical component of the flow is more pronounced, compared to the tangential component. Besides, the presence of the hill is also seen to relocate the center of tornadic flow. New FSUR values are produced for shallow and steep hills.

• Wind and Structures
• /
• v.24 no.6
• /
• pp.657-677
• /
• 2017

This paper discusses some features and conditions that characterize the Zonda wind, focusing particularly on the implications for wind engineering applications. This kind of wind, typical of mountainous regions, is far from being adequately characterized for computational simulations and proper modeling in experimental facilities such as boundary layer wind tunnels. The objective of this article is to report the research works that are being developed on this kind of wind, describing the main obtained results, and also to establish some general guidelines for the proper analysis of the Zonda in the wind engineering context. A classification for the Zonda wind is indicated and different cases of structural and environmental effects are described. Available meteorological data is analyzed from the wind engineering point of view to obtain the Zonda wind gust factors, as well as basic wind speeds relevant for structural design. Some considerations and possible directions for the Zonda wind-tunnel and computational modeling are provided. Gust factor values larger than those used for open terrain were obtained, nevertheless, the basic wind speed values obtained are similar to values presented by the Argentinian Wind Code for three-second gust, principally at Mendoza airport.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.21-28
• /
• 2010

The classical RTK System requires that GPS data is transmitted from a single reference receiver to one or more roving units. But its error increase due to distance between reference and rover. VRS(Virtual Reference Station) system, a network of reference stations can be used to isolate the components of these systematic errors and use the resultant corrections to create Virtual Reference Stations at any location within the network. Use of a VRS significantly reduces the effects of systematic errors and improved accuracy. In this study, Network-RTK survey using VRS serviced by NGII(National Geographic Information Institute) was performed and the results were compared with results of total station surveying and notified coordinates of cadastral control points for utilization assessment of VRS.

• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.87-98
• /
• 2000

The objective of this study is to test the flood forecasting capability of TOPMODEL on a single watershed in Korea. The selected study area is the Soyang River basin with outlet at Soyang Dam site. The three daily hydrographs and the three hourly flood events during 1990~1996 are selected for model calibrations and performance tests. The model parameters are estimated on 1990 daily event by manual fitting technique and the effects of topographic index distribution to river flow simulations are investigated on the study area. The model performance on correlation coefficient between the observed and the simulated flows for the verification periods are above 0.77 on the 95-, 96-daily events, while above 0.87 for 90-, 95-, 96-hourly events. By the consideration of flood flow characteristics in Korea, the physical interpretation of the model concept, and the model performance, it can be concluded that the TOPMODEL is feasible as a flood forecasting model in Korea. Korea.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.61-69
• /
• 2009

In mid-July, 2006 the torrential rainfall across Gangwon-do region caused 48 casualties and 1,248 houses submerged, resulting in damages with the restoration costs of 3 trillion and 512.5 billion won. This was because the topographic characteristics of Gangwon-do region for which mountainous areas mostly account increased the effects of landslide. In this study, the landslide region was shot using the PKNU No.4 system immediately after the occurrence of landslide in order to analyze it as objectively, exactly, and rapidly as possible. 1,054 areas with landslide occurrence were extracted by digitizing the shot images through visual reading after orthometric correction using ERDAS 9.1. Using the Arc GIS 9.2, a GIS program, hydrologic, topographic, clinical, geologic, pedologic aspects and characteristics of the landslide region were established in database through overlay analysis of digital map, vegetation map, geologic map, and soil map, and the status and characteristics of the occurrence of the landslide were analyzed.

• Journal of Korea Water Resources Association
• /
• v.31 no.2
• /
• pp.199-208
• /
• 1998

This study is on the application of TOPMDEL(Topographic based hydrologic model) Which is a distributed rainfall-runoff model to the flood runoff analysis. The test area was Wichun experimental catchment site which is mountainous mid-area (Dongok, 33.63$\textrm{km}^2$ and Goro, 109,725 $\textrm{km}^2$) and being operated by the Ministry of Construction and ransporation. A three-dimensional digital elevation model(DEM) map was constructed using a physiographic map(1/25,000) and GIS software, Arc/Info, was used to the analysis of geofraphic factors. The topographic index of Dongok and Goro subcatchment was similar. As a results of the analysis, the model was validated that the simulated peak flow of a flood runoff was fit to the observed data. For the analysis of the effects of grid size, Dongok subcatchment was divided into 100,120-,240 m grid and Goro subcatchment was divided into grid and 120,200,350 m grid. It was shown that the peak flow increased in proportion to the increases of the grid size, but peak times were constant regardless of the grid size in both of the watershed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.349-356
• /
• 2013

The purpose of this study is to review and overcome the limits of the existing design wave model applied to such waters as those located inside bays or near islands where the impact of wind influenced waves are more dominant, due to the nature of topographic isolation, than the influence of direct waves coming from the open sea. Although the existing model for an inside bay design wave is excellent for considering wind factors and very adaptable to topographically complicated areas compared to other models, it is difficult to show the wave diffractions and reflections caused by large scale structures or topographic features in the region. The study examined the various methods capable of taking into account wave diffraction, the angle of wave reflection, and changes in water depth. As a result of applying the modified design wave model to the target situation (inside bay or near island areas), it was found that the reliability of the design wave height around marine structures was improved, compared to the existing models. Therefore, it is fair to predict that the new model could provide more accurate design waves in the design of marine structures.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.482-491
• /
• 2012

Because the satellite imagery can detect the radiative heat from the surface using the thermal IR (TIR) channel, there have been many efforts to verify the relationship between the land surface temperature (LST) and urban heat island. However, the relationship between geomorphological characteristics like surface aspects and LST is relatively less studied. Therefore, the geomorphological elements, for example, surface aspects and surface slopes, are considered to evaluate their effects on the change of the surface temperature distribution using the Landsat 7 ETM+ TIR channel and the possibility of the image to detect anthropogenic heat from the surface. We found that the surface aspect is ignorable but the surface slope with the sun elevation influences on the surface temperature distribution. Also, the radiative heat from the surface to the atmosphere could not be accurately recorded by the satellite image due to the surface slope but the slope correction process used in this study could correct the surface temperature under slope condition and the slope correction, in fact, was not influenced on the average temperature of the surface. The possibility of the anthropogenic heat detection from the surface from the satellite imagery was verified as well.