• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.3
• /
• pp.19-32
• /
• 2002

Topographic information is indispensable in the applications that require elevational data. These applications are exemplified by watershed partition, extraction of drainage networks, viewshed analysis, derivation of geomorphologic features, quantification of landslide-terrain, and identification of topographic settings susceptible to landsliding. Therefore, we study the accuracy of data on topographic parameters derived from digital elevation models(DEMs). This research wished to analyze the effect that data source and grid size get in topography parameter using gridded DEM. An analysis of topography parameter extract and compared drainage basin, watershed slope, stream network using DEM is constructed by digital map and DTED DEM. Especially, when extract stream network from gridded DEM, received much effects according to threshold value of flowaccumulation regardless of DEM grid size. Therefore, this study applied equal threshold value of flowaccumulation for two data sources, and compare and analyzed stream network.

• Journal of Korea Water Resources Association
• /
• v.32 no.4
• /
• pp.489-499
• /
• 1999

This research investigated the applicapability of an improved algorithm to calculate the topographic index, ln($\alpha$/tan B), for the topography of Korea employing channel initiation threshold area(CIT) and an exponent for the gradient(H). hanjaechun subwatershed in Cheongdochun and Dongok subwatershed in Wichun test watershed were selected as study areas. The digital elevation models(DEM) of study areas have been made with the resolution from 10m to 100m. Application of CIT to the traditional algorithm provide reasonable computation method in considering channel pixel impact. Introduction of the gradient exponent(H) made it possible to obtain better flow convergence effect in concave topography comparing with the traditional multiple flow direction algorithm. The improved algorithm shows the capability to relax the overestimation problem of rising limb of hydrograph through reducing overestimated high value of topographic index.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.43-53
• /
• 2010

A dam is effective in stable supply of water required in daily life and reduction of damage from floods. hut a lot of land or houses arc submerged due to the construction of a darn heavily affecting environment in surrounding areas. In order to improve and support daily life environment. surrounding a dam, many projects have been conducted. and the study has focused on analyzing bow to calculate error characteristics of scale effect for submerged area by using GIS spatial overlay. First, as a result of areal error in submerged area by scale based on a 1/3,000 digital topographic map, it was found that the 1/5,000 digital topographic map is 9.5 times, 9.0 times and 10.5 times more accurate than the 1/25,000 digital topographic map, respectively, in the total of areal error, standard error and areal error for submerged area. Second, as a result of analysis on areal error in areas surrounding a dam, it has been found that Jinan-eup in Jinan-gun registered the largest difference in area within 2km and 2~5km catchment area by recording 13.8 times and 20.6 times, respectively, in the 1/5,000 digital topographic map compared to the 1/25,000 digital topographic map. In addition, in areas out of catchment area within 2km, the area of occupation was very small, so there were no characteristics in error. The out of catchment area, Nami-myeon in Geumsan-gun recorded the largest errors of 31.8 times. Finally, it was found that the ratio of the total areal error in area surrounding a dam, standard error and the total areal error in the entire area using 1,5000 digital topographic map is 7.4 times, 11.8 times and 7.4 times more accurate than the 1/25,000 digital topographic map.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.201-213
• /
• 2015

Site effects resulting in the amplification of earthquake ground motion are strongly influenced not only by the subsurface soil conditions and structure, but also by the surface topography. Yet, over the last several decades, most studies of site-specific seismic responses in Korea have focused primarily on the seismic amplification associated with geologic and soil conditions. For example, the effects of local geology are now well established and have been incorporated into current Korean seismic design codes, whereas topographic effects have not been considered. To help address this shortcoming, two-dimensional (2D) seismic site response analyses, using finite element (FE) ground modeling with three different slope angles, were performed in order to assess the site effects of surface topography. We then compared our results, specifically peak ground acceleration (PGA) and acceleration response spectrum, to those of one-dimensional (1D) FE model analyses conducted alongside our study. Throughout much of the upper slope region, PGAs and spectral accelerations are larger in the 2D analyses than in the 1D analyses as a result of the topographic effect.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.504-507
• /
• 2006

Airborn Lidar technology has been applied to diverse applications with the advantages of accurate 3D information. Further, Lidar intensity, backscattered signal power, can provid us additional information regarding target's characteristics. Lidar intensity varies by the target reflectance, moisture condition, range, and viewing geometry. This study purposes to generate normalized airborne LiDAR intensity image considering those influential factors such as reflectance, range and geometric/topographic factors (scan angle, ground height, aspect, slope, local incidence angle: LIA). Laser points from one flight line were extracted to simplify the geometric conditions. Laser intensities of sample plots, selected by using a set of reference data and ground survey, werethen statistically analyzed with independent variables. Target reflectance, range between sensor and target, and surface slope were main factors to influence the laser intensity. Intensity of laser points was initially normalized by removing range effect only. However, microsite topographic factor, such as slope angle, was not normalized due to difficulty of automatic calculation.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1470-1472
• /
• 2003

Hyperion, as hyperspectral data, is carried on NASA’s EO-1 satellite, can be used in more subtle discrimination on forest cover, with 224 band in 360 ?2580 nm (10nm interval). In this study, Hyperion image is used to investigate the effects of topography on the classification of forest cover, and to assess whether the topographic correction improves the discrimination of species units for practical forest mapping. A publicly available Digital Elevation Model (DEM), at a scale of 1:25,000, is used to model the radiance variation on forest, considering MSR(Mean Spectral Ratio) on antithesis aspects. Hyperion, as hyperspectral data, is corrected on a pixel-by-pixel basis to normalize the scene to a uniform solar illumination and viewing geometry. As a result, the approach on topographic effect normalization in hyperspectral data can effectively reduce the variation in detected radiance due to changes in forest illumination, progress the classification of forest cover.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.97-98
• /
• 2010

• Atmosphere
• /
• v.17 no.4
• /
• pp.393-405
• /
• 2007

Simulation results of WRF for the case of typhoon 'Rusa' were analyzed, comparing with observed data especially forjavascript:confirm_mark('abe', '1'); the Gangneung area around to examine its ability in numerical simulation. From the hourly precipitation time series, two peaks were found at Gangneung and Daegwallyeong, while only one peak was found from those of inland regions else. Especially, for the Yeongdong region, the first peak was directly related to spiral bands generated in front of the typhoon. Convective cells that were developed within the spiral bands moved to the eastern coastal area from the sea so that local heavy rainfall occurred in the Yeongdong region. The second peak was mainly related to the accompanying rain band of typhoon itself, topographic effect and the convergence near Gangneung area. Precipitation in Gangneung was simulated as much as about 30% of observed one. The main reason of this result came from a poor representation of wind directions in Gangneung area of WRF model. Observed wind direction was northwesterly but simulated one was nearly easterly in the area. This might shift a local heavy rainfall area downstream to the mountain area rather than the coastal area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.69-78
• /
• 2013

Recently, as GIS industry has substantially grown up, convergence between industries such as the application coverage of surveying and cadastral information is gradually on the increase. The new approach of convergence between topographic surveying and cadastral survey is indispensable to make the change of geospatial environment ready and to maximize the utilization of National Spatial Data Infrastructure(NSDI). The purpose of this paper is to seek the way of synergistic improvement in topographic surveying and cadastral survey in comprehensive aspects of national geospatial information. First, we reviewed policy environment to clearly establish aim of convergence and promising perspective of GIS industry policy, considering NSDI. In addition, we examined current state of administration (organization, human resource, service) and institution situation. We came up with interior ability and external policy environment as well as critical success factor for the synergistic convergence by using SWOT analysis. Lastly, we developed basic perspective of convergence and improvement model and concrete scheme for stakeholder to complementary make progress. We can come to conclusion that the convergence of topographic surveying and cadastral survey should be not only carried in macro outline of successful NSDI but also committed to completion and maintenance of GIS framework.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.165-170
• /
• 2003

Recently, resistivity surveys have been frequently carried out over the irregular terrain such as mountainous area. Such an irregular terrain itself can produce significant anomalies which may lead to misinterpretations. In this study, topographic effects in resistivity survey were studied using the physical scale modeling as well as the numerical one adopting finite element method. The scale modeling was conducted at a pond, so that we could avoid the edge effect, the inherent problem of the scale modeling conducted in a water tank in laboratory. The modeling experiments for two topographic features, a ridge and a valley with various slope angles, confirmed that the results by the two different modeling techniques coincide with each other fairly well for all the terrain models. These experiments adopting dipole-dipole array showed the distinctive terrain effects, such that a ridge produces a high apparent resistivity anomaly at the ridge center flanked by zones of lower apparent resistivity. On the other hand, a valley produces the opposite anomaly pattern, a central low flanked by highs. As the slope of a terrain model becomes steeper, the terrain-induced anomalies become stronger, and moreover, apparent resistivity can become even negative for the model with extremely high slope angle. All the modeling results led us to the conclusion that terrain effects should be included in the numerical modeling and/or the inversion process to interpret data acquired at the rugged terrain area.