• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.1 s.232
• /
• pp.1-8
• /
• 2005

Laser melting problems with deformed substrates are investigated by axisymmetric numerical simulations. Source-based method is used to solve the energy equation, and the momentum equations are solved in the liquid domain with SIMPLER algorithm. Using a laser beam with a top-hat heat flux distribution, this study is performed to examine the effect of surface deformation, beam power density and surface tension force on the molten pool during laser melting. Surface temperature decreases with increasing surface deformation, while surface velocity increases. It is found that surface deformation, beam power density and surface tension force have a very significant effect on heat transfer and fluid flow during laser melting.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.117-136
• /
• 2019

In this study, a hybrid-type of day fog detection algorithm (DFDA) was developed based on the optical and textural characteristics of fog top, using the Himawari-8 /Advanced Himawari Imager data. Supplementary data, such as temperatures of numerical weather prediction model and sea surface temperatures of operational sea surface temperature and sea ice analysis, were used for fog detection. And 10 minutes data from visibility meter from the Korea Meteorological Administration were used for a quantitative verification of the fog detection results. Normalized albedo of fog top was utilized to distinguish between fog and other objects such as clouds, land, and oceans. The normalized local standard deviation of the fog surface and temperature difference between fog top and air temperature were also assessed to separate the fog from low cloud. Initial threshold values (ITVs) for the fog detection elements were selected using hat-shaped threshold values through frequency distribution analysis of fog cases.And the ITVs were optimized through the iteration method in terms of maximization of POD and minimization of FAR. The visual inspection and a quantitative verification using a visibility meter showed that the DFDA successfully detected a wide range of fog. The quantitative verification in both training and verification cases, the average POD (FAR) was 0.75 (0.41) and 0.74 (0.46), respectively. However, sophistication of the threshold values of the detection elements, as well as utilization of other channel data are necessary as the fog detection levels vary for different fog cases(POD: 0.65-0.87, FAR: 0.30-0.53).

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.1-16
• /
• 2013

Xiognu people were the first of the Central-Asian nomads to establish a nation in 209 B.C. They always moved around looking for places to breed their animals and fertile grounds, so they wore clothes made of fur and leather and covered their tents with felt from the livestock. This research studies on the literatures, costumes and the achievement of archaeological excavation. Furthermore, to investigate on costumes excavated of Xiongnu, we visited the Mongolian National Museum and the Hermitage Museum. A corn-hat made of felt, a felt hat with ear flaps and a golden crown with a bird on the top were unearthed from a tomb of Xiongnu in Inner mongolia. Women usually wore pigtails, and men wore pigtails or ponytails but they cut their hair short when holding a funeral. Many pigtails discovered in Noyon uul tombs can be considered as their funeral customs. The Xiongnu wore a round or v-neck caftan attached straight sleeves reaching knees in the left folded style, and because they always rode horses, having the length of the caftan not go past their buttocks would have made it more convenient for them. During the period of Western Han, Ho refered to Xiongnu and it became a common name for northern races. They used leather belts and an animal-designed buckle was found. Women commonly rouged their cheeks for a vivid and cute look, and many ornaments were excavated including bracelets, rings and decorations made of gold, silver, copper and jade, among which there were hair ornaments used to identify one's class. A horse pattern with wings and a horn of Golmod T20 was substitution for the Schythian use of deer. Patterns or shape of unearthed articles present in the Xiongnu culture in Noyon uul had a close relationship with Altaic, Greek and Persian cultures. The Xiongnu clothing was made of animals' skin and fur, woolen textiles and felt. It was folded to the left for upper garments, and the pants were adjusted using a belt and shoes were made of leather, which was very suitable for protection against the cold and horse riding. Mobility played a significant role in their clothing.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.981-992
• /
• 2011

The objectives of this study were to analyze the design elements of hairstyles, wedding headdresses, and necklines in wedding magazine pictures by using content analysis method and to investigate the differences in image perception according to hairstyle, wedding headdress, and neckline. A quasi-experimental method by questionnaire was used. The experimental design was a $2{\times}5{\times}4$(hairstyles${\times}$wedding headdresses${\times}$necklines) factorial design by 3 independent variables. The subjects consisted of 378 female college students. The results are as follow. First, the most popular among hairstyles, headdresses, and neckline forms were the updo hairstyle, dark brown hair color, the crown headdress, white flowers, and the horizontal bared top. Second, the elements determined to be most elegant and attractive were the medium-up hairstyle and the crown with a veil. However the wedding hat was perceived to be high in individuality and tenderness, while the flower and the wedding hat were perceived to be very pretty. The halter neckline was perceived to be higher in individuality and attractiveness than the other neckline types. Third, the medium-up hairstyle when wearing a crown with veil was perceived to be the most elegant. Placing a flower in the long-wave hairstyle was evaluated as looking most pretty. Fourth, the medium-up hairstyle was higher in preference than the long-wave style. Among wedding headdresses, there was greatest preference for a crown.

• Steel and Composite Structures
• /
• v.1 no.1
• /
• pp.17-32
• /
• 2001

The Rosette-joining system is a completely new press-joining method for cold-formed steel structures. One Rosette-joint has a shear capacity equal to that of approximately four screws or rivets. The Rosette thin-walled steel truss system presents a new fully integrated prefabricated alternative to light-weight roof truss structures. The trusses are built up on special industrial production lines from modified top hat sections used as top and bottom chords and channel sections used as webs which are joined together with the Rosette press-joining technique to form a completed structure easy to transport and install. A single web section is used when sufficient but can be strengthened by double-nesting two separate sections or by using two lateral profiles where greater compressive axial forces are met. An individual joint in the truss can be strengthened by introducing a hollow bolt into the joint hole. The bolt gives the connection capacity a boost of approximately 20%. A series of laboratory tests have been carried out in order to verify the Rosette truss system in practice. In addition to compression tests on individual sections of different lengths, tests have also been done on small structural assemblies and on actual full-scale trusses of a span of 10 metres. Design calculations have been performed on selected roof truss geometries based on the test results, FE-analysis and on the Eurocode 3 and U.S.(AISI) design codes.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.485-490
• /
• 2002

As the products of internet appliance, such as digital TV, internet set-top box, and internet phone, are continually produced, the market of real time operating system which controls those products is being highly increased. ETRI developed the extensible real time operating system, Qplus-P, which can be used from PDA to internet set-top box and home server. This paper describes the design and implementation of C standard library for real-time operating system Qplus-P. The Qplus-P C standard library follows EL/IX API level, which is proposed to the real-time operating system international standard by the RedHat. And, the C standard library functions, which are needed to support the Tiny-X and Kaffe, are also implemented. The implemented C standard library can reduce the size of library about 30% compare to the C library that does not follow EL/IX API level.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.644-650
• /
• 2012

This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.

• Journal of Welding and Joining
• /
• v.33 no.4
• /
• pp.7-16
• /
• 2015

New lasers such as high power, high brightness and short wavelength laser are using diverse industry. Also new technologies are developing actively to solve various issues such as spattering, process monitoring, deep penetration and key-hole stability. ICALEO is the international congress where recent technology for laser material processing and laser system are present. At 2014, it was held at San Diego in USA and more than 260 papers were presented from 28 country. The effect of the laser beam shape such as Gaussian like and top-hat was investigated on acoustic emission signal and pore formation in welding. Inline penetration depth was measured with ICI(Inline Coherent Imaging) technique and the data was verified with real time X-ray image on laser welding. The laser welding performance at low pressure environment was evaluated for the thick plate alloy steel. UV laser was used to weld various metals such as Cu, Aluminum, steel and stainless steel. The effect of the wavelength of the laser on the formation of the wave at the wall of the key-hole front and the absorptivity was investigated.

• Journal of Information Processing Systems
• /
• v.9 no.1
• /
• pp.103-116
• /
• 2013

Prostate cancer is one of the most frequent cancers in men and is a major cause of mortality in the most of countries. In many diagnostic and treatment procedures for prostate disease accurate detection of prostate boundaries in transrectal ultrasound(TRUS) images is required. This is a challenging and difficult task due to weak prostate boundaries, speckle noise and the short range of gray levels. In this paper a method for automatic prostate segmentation in TRUS images using Gabor feature extraction and snake-like contour is presented. This method involves preprocessing, extracting Gabor feature, training, and prostate segmentation. The speckle reduction for preprocessing step has been achieved by using stick filter and top-hat transform has been implemented for smoothing the contour. A Gabor filter bank for extraction of rotation-invariant texture features has been implemented. A support vector machine(SVM) for training step has been used to get each feature of prostate and nonprostate. Finally, the boundary of prostate is extracted by the snake-like contour algorithm. A number of experiments are conducted to validate this method and results showed that this new algorithm extracted the prostate boundary with less than 10.2% of the accuracy which is relative to boundary provided manually by experts.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.853-858
• /
• 2003

The suitable estimation of the filter width in the dynamic eddy viscosity model were investigated in high Reynolds number channel flow. In this study, the improvement on matters by optimizing the test filter shape was attempted through the numerical experiment. The way that select optimum test filter width is recommended. Some test filters, one is based on a discrete representation of the top-hat filter and another are based on a high-order filtering operation, are evaluated in simulations of the turbulent channel flow at Reynolds number 1020, based on friction velocity and channel half width. It appears that the estimation of test filter width practically can decrease the dissipative nature of dynamic eddy viscosity model with explicit test filter. It shows that the value of the filter width ratio used in the dynamic procedure must match the properties of the test filter actually used in the calculation.