• International Journal of Internet, Broadcasting and Communication
• /
• 제10권3호
• /
• pp.128-135
• /
• 2018

The various video recording device, like car black box and cctv, are used currently and video contents are used as evidence of traffic accidents and scenes of crime. To verify integrity of video content, there are various study on manipulated video content analysis. Among these studies, a study based on analysis of video file structure and its variables needs a tool which can be used to analyze file structure and extract interested attributes. In this paper, we proposed design and implementation of an analyzing tool which visualizes video file structure and its attributes. The proposed tool use a model which reflects commonality of various video container format, so it is available to analyze video structure with regardless of the video file types. And the tool specifies interested file structure properties in XML and therefore we can change target properties easily without modification of the tool.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.184-188
• /
• 2002

In 2D-Profile machining using cutter radius compensation cutter interferences are very common. To prevent the cutter interferences undercuts are inevitable in some regions of the profile. The undercut regions require cleanup machining using smaller radius tools. This paper considers a procedure of the tool path generation for the cleanup profile machining. And two methods are introduced for an efficient tool path generation. One is how to reduce the machining time by uniting adjacent tool paths of undercut regions, and the other is how to find the tool path with the minimal distance by applying TSP algorithm.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1999년도 추계학술대회 논문집
• /
• pp.31-31
• /
• 1999

In the preliminary design stage of an automotive interior, human sensibility is first analyzed and applied to design parameters for satisfying consumers needs using optimization and engineering judgement. Then designers try to design components that meet these needs using empirical and trial-and-error procedures. This process usually yields poor results because it is difficult to find a feasible design that satisfies the targets by trial-and-error (a feasible design is one that satisfies consumers needs and design constraints). To improve this process, we need tools to link the human sensibility with the design parameters that define the geometry of the components of an automotive interior. A methodology is presented for developing a tool for design guidance of an automotive interior. This tool translates the human sensibility into the design parameters that define the geometry of the components of an automotive interior. This tool, called interpreter, rapidly predicts the human sensibility of a given automotive interior and presents design parameters that meet or exceed given human sensibility to satisfy consumers needs and design constraints. The methodology is demonstrated on the interior design of an actual automotive.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.782-788
• /
• 2013

This study addresses the issue of safety of the splash guard of a computer numerical control (CNC) machine tool at the design stage. As an impact test for evaluating safety requirements such as strength under the safety regulation is an expensive and iterative task, it is necessary to develop a new method to minimize the task of the impact test for development of the machine tool. In this study, explicit finite element method was adopted for replacement of the impact test of the splash guard of a machine tool at the design stage. A finite element model was developed for implementing the impact test on an actual vertical CNC lathe and then produced the analysis including plastic strain and deformation to enable the safety of its splash guard to be determined. The analysis results demonstrated that the finite element method can be applied to safety evaluation for design of the splash guard of a CNC machine tool.

• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.961-968
• /
• 2013

In this paper, we propose an optimal design for starfish capturing manipulator module with four-bar linkage mechanism. A tool link with compliance is attached on the four-bar linkage, and the tool repeats detaching starfish from the ground and putting it into the storage box. Since the tool is not rigid and the manipulator is operating underwater, the trajectory of the tool tip is determined by its dynamics as well as kinematics. We analyzed the trajectory of the manipulator tool tip by quasi-static analysis considering both kinematics and dynamics. In optimization, the lengths of each link and the tool stiffness are considered as control variables. To maximize the capturing ability, capturing stroke of the four-bar manipulator trajectory is maximized. Reaction force and reaction moment, and other kinematic constraints were considered as inequality constraints.

• 한국기계가공학회지
• /
• 제5권4호
• /
• pp.72-78
• /
• 2006

Inherent in machine tool structures are the vibrations which are generated by rotating parts such as motors, spindles and chucks. The vibrations not only hurt the precision machining but also damage the structures, and become more serious with time. Many of the old machine tools show severe vibrations for the desired accuracy of the modern industries. It is too much of a waste, however, to get rid of them as scraps. There have been many researches in order to suppress the vibrations of old machine tool structures using the tool post which utilizes actuators to compensate the existing vibrations and using the dampers or absorbers attached to some critical parts. In this paper, the dynamic properties are analyzed to obtain the natural frequencies and mode shapes of a machine tool structure which reflect the main reasons of the biggest vibrations under the given operating conditions. And the feasibility of improving the stability of the structure has been investigated with minor design changes and expenses. The result of the study shows that simple changes based on proper system identification can considerably improve the stability of the machine tool structure.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.17-22
• /
• 2019

In this study, Cermet Reamers for planet carrier was manufactured and the machining characteristics were analyzed through processing experiment. Cermet reamer with ∅14, ∅15, ∅18, and ∅21mm was used and machining characteristics were compared and analyzed by observing tool wear, machining hole dimensions and surface roughness. In the flank wear of the tool, the result is less than 0.2mm, which is the target value for each tool size. The experimental results of the machining hole dimensions show the results of the process control range of 3/100 or less according to the size of the tool. Also, the surface roughness measurement result showed a value of less than $0.5{\mu}m$ in the process control range for each tool size. As a result of observing the experimental results of each ∅, the results satisfied the process standard in both the tool wear, the machining hole dimension and the surface roughness.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.103-110
• /
• 2010

This paper presents the optimized approximation of finite element modeling for a complex tool holder spindle using both DOE (Design of Experiment) with Optimal Latin Hypercube (OLH) method and approximation modeling method with Radial Basis Function (RBF) neural network structure. The complex tool holder is used for holding a (milling/drilling) tool of a machine tool. The engineering problem of complex tool holder results from the twisting of spindle of tool holder. For this purpose, we present the optimized approximation of finite element modeling for a complex tool holder spindle using both DOE (Design of Experiment) with Optimal Latin Hypercube (OLH) method (specifically a module of $iSight^{(R)}$ FD-3.1) and approximation modeling method with Radial Basis Function (RBF) (another module of $iSight^{(R)}$ FD-3.1) neural network structure

• 한국실내디자인학회논문집
• /
• 제25권3호
• /
• pp.31-39
• /
• 2016

This study is aimed to increase the possibility of using the Christopher Alexander's pattern language. The methodology of this study is (i) to analyze the pattern language by using the network analysis tool in order to understand the complicate network structure of the pattern language, and (ii) to apply the Alexander's method of using the pattern language by using the network analysis tool (Gephi) and to examine the feasibility of the network analysis tool as a tool for using the pattern language. Firstly, as a result of analysing the pattern language, (i) the pattern language classified by pattern number is distinguished by the patterns of towns, buildings and construction, among which the pattern of buildings plays a key function in the networks; (ii) the buildings functions a medium connecting between the towns and the construction; and (iii) the pattern language is divided into 6 sub-modules, through which the user can select a pattern. Secondly, the result of using the network analysis tool as a tool for using the pattern language (i) suggests the new method of using the pattern language by using the network analysis tool (Gephi); (ii) makes it possible to easily figure out the characteristics of the links between the patterns; and (iii) increases the completeness of the pattern language by making it easy to find out the sub-patterns in selecting a pattern.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.64-71
• /
• 2013

In this paper, finite element method was used for flow and strength analysis of AZ31 magnesium alloy under friction stir welding. The simulations were carried out by SYSWELD s/w, and the modeling of sheet was doned by unigraphics NX3 s/w. Welding variables for analysis were rotating speed and welding speed of tool. Also two-way factorial design method was applied to confirm the effect of welding variables on maximum temperature and stress of material used. From these results, the increaser welding speed of tool the decreaser maximum temperature, but the increaser maximum stress. Also the increaser rotating speed of tool the increaser maximum temperature, but the decreaser maximum stress. In addition the increaser welding speed of tool and the decreaser rotating speed of tool, the narrower heat effect zone. Finally rotating speed of tool influenced on maximum temperature more than welding speed of tool, and welding speed of tool influenced on maximum stress more than rotating speed of tool from the variance analysis.