Browse > Article
http://dx.doi.org/10.14775/ksmpe.2019.18.5.017

A Study on the Performance of Cermet Reamer for Transmission Parts  

Cho, Jun Hyun (School of Mechanical Design Engineering, Kumoh UNIV.)
Ha, Byeong Cheol (School of Mechanical Design Engineering, Kumoh UNIV.)
Lee, Jong Chan (School of Mechanical Design Engineering, Kumoh UNIV.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.18, no.5, 2019 , pp. 17-22 More about this Journal
Abstract
In this study, Cermet Reamers for planet carrier was manufactured and the machining characteristics were analyzed through processing experiment. Cermet reamer with ∅14, ∅15, ∅18, and ∅21mm was used and machining characteristics were compared and analyzed by observing tool wear, machining hole dimensions and surface roughness. In the flank wear of the tool, the result is less than 0.2mm, which is the target value for each tool size. The experimental results of the machining hole dimensions show the results of the process control range of 3/100 or less according to the size of the tool. Also, the surface roughness measurement result showed a value of less than $0.5{\mu}m$ in the process control range for each tool size. As a result of observing the experimental results of each ∅, the results satisfied the process standard in both the tool wear, the machining hole dimension and the surface roughness.
Keywords
Cermet Reamer; Automobile Transmission; Carrier;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Shin, J. H., Kwon S, M., Hwang, J. G., Kwak, H. S., Ko, W. S., "A Study on a Mechanism Type Design of Genaeral Planetary Gear Reducers," Journal of the Korean Society for Power System Engineering, Spring Conference, pp. 1728-1382, 2005.
2 Kim, Y. S., Choi, S. U., Chin, S. H., "A Study on the Efficiency Analysis of 2K-H Type Planetary Gear Train", Journal of the Korean Society for Precision Engineering, Vol. 17, No. 3, pp. 200-207, 2000.
3 Ko, Y., Hosoi, K., "Measurements of Power Losses in Automobile Drive Train", SAE,. Paper 840054
4 Kim, H. J., Kim, N. K., "A Study on 6 Edges Reamer for the Improvement of Accuracy of Automotive Cylinder Head Guide Pin", Transactions of the Korean Society of Machine Tool Engineers, Vol. 13, No. 4, pp.81-86, 2004.
5 Joo, M. S., Kim, M. J., Park, B. S., Jeon, E. C. Thoe, "A Study on the Selection of Optimization Machining Condition for Hiring Using the CBN Reamer", Journal of the Korean Society for Precision Engineering Autumn Conference, pp. 295-299, 1999.