• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.301-307
• /
• 2015

High quality transplants are critical for success in crop production. Increasing numbers of growers purchase their transplants from specialized transplant producers instead of growing their own transplants. A drawback of purchasing transplants is the risk of deterioration to transplants during transportation from transplant producers to the growers. This study evaluates the influence of temperature on the quality of grafted tomatoes transplants (Solanum lycopersicum cv. Super Doterang), in order to propose optimum temperature condition for the transportation of grafted tomato transplants. Grafted tomato transplants with visible flower trusses were exposed to different air temperature ($10^{\circ}C$, $25^{\circ}C$, or $40^{\circ}C$) for 2, 4, or 6 hours. After treatment, the NDVI (Normalized Difference Vegetation Index) values of tomato transplants treated at 25 and $40^{\circ}C$ were lower than that at $10^{\circ}C$. The root fresh weight was lowest at $40^{\circ}C$. After transplanting, the transplants that were exposed to the air temperature of $40^{\circ}C$ exhibited chlorosis and blight on lower leaves. The degree of damage on leaves was severer as the high temperature exposure time was longer. The temperature conditions during the transportation also influenced the growth, flowering and fruit set of tomatoes after transplanting. The fruit number and weight of first truss was lowest at $40^{\circ}C$ for 6 hours. Accordingly, it is recommended that the temperature during the transportation should be controlled and kept at the range from 10 to $25^{\circ}C$ even though the period is short (within as six hours) in order to maintain the quality of transplants.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.444-451
• /
• 2022

Recently, long-term cultivation is becoming more common with the increase in tomato hydroponics. In hydroponics, it is very important to supply an appropriate nutrient solution considering the nutrient and moisture requirements of crops, in terms of productivity, resource use, and environmental conservation. Since seasonal environmental changes appear severely in long-term cultivation, it is so critical to manage irrigation control considering these changes. Therefore, this study was carried out to investigate the effect of irrigation volume on growth and yield in tomato long-term cultivation using coir substrate. The irrigation volume was adjusted at 4 levels (high, medium high, medium low and low) by different irrigation frequency. Irrigation scheduling (frequency) was controlled based on solar radiation which measured by radiation sensor installed outside the greenhouse and performed whenever accumulated solar radiation energy reached set value. Set value of integrated solar radiation was changed by the growing season. The results revealed that the higher irrigation volume caused the higher drainage rate, which could prevent the EC of drainage from rising excessively. As the cultivation period elapsed, the EC of the drainage increased. And the lower irrigation volume supplied, the more the increase in EC of the drainage. Plant length was shorter in the low irrigation volume treatment compared to the other treatments. But irrigation volume did not affect the number of nodes and fruit clusters. The number of fruit settings was not significantly affected by the irrigation volume in general, but high irrigation volume significantly decreased fruit setting and yield of the 12-15th cluster developed during low temperature period. Blossom-end rot occurred early with a high incidence rate in the low irrigation volume treatment group. The highest weight fruits was obtained from the high irrigation treatment group, while the medium high treatment group had the highest total yield. As a result of the experiment, it could be confirmed the effect of irrigation amount on the nutrient and moisture stabilization in the root zone and yield, in addition to the importance of proper irrigation control when cultivating tomato plants hydroponically using coir substrate. Therefore, it is necessary to continue the research on this topic, as it is judged that the precise irrigation control algorithm based on root zone-information applied to the integrated environmental control system, will contribute to the improvement of crop productivity as well as the development of hydroponics control techniques.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.687-696
• /
• 2015

Black mini tomato 'Hei-G' fruits were harvested at different stages of maturity (immature-mature green and mature-black red) and stored at different temperatures (8, 12, and $20^{\circ}C$) to investigate the quality and lycopene content during storage. Weight loss increased dramatically at higher temperature for both harvesting stages without significant differences. Firmness of immature fruits decreased below the initial level of mature fruit (8.1N) after 5, 8, and 19 days storage, when they were stored at 20, 12, and $8^{\circ}C$, respectively. Soluble solid contents of mature fruit increased at initial storage, and were higher as compared to immature fruits before deterioration at each storage temperature. Decrease in titratable acid of mature fruits depended on storage time and temperature. However, titratable acid of immature fruits showed little change during storage, and so it did not affect flavor. Hunter a value changed greatly in immature fruit stored at high temperature. Unlike ripe tomatoes, there was no significant difference in black tomato Hunter b values of immature and mature fruit at initial and 12 days storage. However, immature fruits stored at $8^{\circ}C$ did not reach full maturity and color development and ripening. High storage temperature increased lycopene production while low storage temperature blocked lycopene development. Shelf life of the immature fruits, which was evaluated by elapsed days to conventional mature stage, was 12 and 15 days when they were stored at 20 and $12^{\circ}C$, respectively. The optimum storage temperature to maintain the quality and lycopene content of mature fruits was $12^{\circ}C$. Moreover, the shelf life of mature fruits stored at $20^{\circ}C$ could reach up to 5 days.

• KSBB Journal
• /
• v.29 no.3
• /
• pp.145-154
• /
• 2014

A fresh vegetable and fruit juice has become a new healthy food available for detoxification, dieting and health. This paper presents the useful information about the quality changes of fresh juice according to different juicer. Quality of fresh juice could be evaluated by several factors such as juice yield, enzyme activity, antioxidant activity, polyphenol contents, and anti-inflammatory activity. The juice yields of 12 different vegetables and fruits were compared using 6 different juicers and it was observed that the yield of slow juicer was better than that of conventional blender. Among 12 samples, the juice yield of grape is the best and the pH of the juice was in the acidic range of 3 and 4. Kiwi and grapefruit were the best in terms of protease enzyme activities by Hemoglobin units on the tyrosine basis and Spectrophotometric acid protease unit and papain units on the tyrosine basis of KFDA protocols. The total polyphenol contents were also high in kiwi and grapefruit. The antioxidant activity by diphenyl-1-picrylhydrazyl (DPPH), superoxide dismutase (SOD), and radical scavenging assay were high in the order of kiwi, grapefruit, grape, tomato, and orange. Anti-inflammatory activities were also assay for 12 samples with 6 juicers. It can be concluded that of fresh fruit and vegetable juice provides a source of antioxidant components and enzymes with high activity. And the enzyme activities could be used as one of the quality indicator of fresh juice. Concerning the juicers used in this study, slow juicer could be recommended to prepare the fresh juice in terms of the juice quality.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.334-341
• /
• 2011

The kinds of crop requested from agricultural actual places of famers, Agricultural extension services and so forth was 8 including red pepper for vegetables, 4 including apple for fruit trees and 6 including chrysanthemum for flowers in 2010. The important vegetables in clinical diagnosis of viral diseases were tomato, watermelon and red pepper having the requested rate of 31.8%, 21.4% and 19.5%, respectively. On fruit trees, grape and apple were most common with the requested rate of 63.6% and 33.0%, orderly. On floral crops, tulip and cactus were damaged by viral diseases with the requested rate of 60.0% and 20.0%, orderly. On peppers and tomatoes, six viruses including Cucumber mosaic virus (CMV) and Broad bean wilt virus 2 (BBWV2) infected. Five viruses including Melon necrotic spot virus (MNSV) and CMV were identified from watermelons. On grapes, six viruses including Grapevine fleck virus (GFkV) infected. CMV was identified from six vegetables including pepper out of 8 kinds of vegetables and tulip plant. Total agents of virus and viroid species were 32 and 4 species, respectively, in 2010. Tomato yellow leaf curl disease by Tomato yellow leaf curl virus and Tobacco yellow leaf curl virus was occurred newly at 18 Si/Gun areas including Buan, Jeonbuk province in 2010 and the total areas were increased up to 58 Si/Gun from the first incidence in 2008. Tomato spotted wilt virus (TSWV) occurred newly at two areas of Jinan, Jeonbuk and Jeju in Jeju province in 2010, and the incidence areas were expanded to 25 Si/Gun areas from severe occurrence at Anyang area in 2004. No incidence of TSWV was recorded only in Gyeongbuk and Chungbuk province. Tomato bushy stunt virus occurred newly at Jinju, Gyeongnam, and it had the total incidence areas of 5 Si/Gun after first observation at Sacheon, Gyeongnam in 2004.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.403-411
• /
• 2009

We inspected seed sizes of 353 genetic accessions of watermelon to diversify functional utility related to seed size and classified them into six representative groups based on their seed sizes. Each group was named as giant seed (GS), big seed (BS), medium size (NS), small size (SS), micro seed (MS) and tomato seed (TS) from the biggest. As the seed size was getting smaller, decreased seed length and seed width, increased seed number per fruit, and decreased seed weight per fruit were observed, but seed shape did not change significantly. In order to study the effect of seed size on fruit weight and seed germination, we developed three near isogenic lines (NILs) with three different seed sizes, SS, MS and TS, from crossing between two accessions 'NT' and 'TDR', and one NIL with seed size of TS from crossing between two accessions 'S55' and 'TDR'. In the study on the fruit weight of NILs with various seed sizes, NS, SS, MS, and TS NILs produced an average of 6.4, 6.3, 5.9, and 4.2 kg fruits, respectively. The bigger seed types showed the better germination rate. NS type showed the highest germination percentage, while TS showed very low germination percentage. Fermentation treatment for 48 hrs increased the germination percentage on TS type seed, but still remained at a low level. In NS, SS, and MS material, the ratio of embryo/whole seed weight was over 50%, meanwhile that of TS was only 44.4% of which low embryo percentage would be one of the reason of low germination percentage. From this study, we concluded that watermelon has very wide genetic diversity on seed size which is somehow related to fruit sizes and germination rate.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.284-288
• /
• 2005

This study was conducted to clarify the effects of supplying methods of selenium on the growth and Se uptake of hydroponically grown tomato plants. Tomato seeds (Lycopersicum esculentum Mill. cv. Momotaro T-93, Daki Seed Co.) were sown in plug tray with fifty holes, and raised for sixty days. Tomato seedlings transplanted to coco fiber slabs were supplied with the nutrient solutions adjusted to EC $2.3dS{\cdot}m^{-1}$ and pH $5.8\~6.2$ recommended by the Japanese Horticultural Experiment Station. Selenium forms used were inorganic $SeO_2$ (here in after referred to Se) and organic selenium chlenium with sugar fatty acid ester (here in after referred to chelated-Se). 10 ppm selenium solutions were treated to tomato plants with foliar applications, drenching, and foliar application plus drenching. Growth characteristics in terms of plant height, number of leaves, leaf area and chlorophyll content were significantly increased in the plot of foliar application ot Se, and in the plot of foliar application plus drenching of chelated-Se than other plots, respectively. Transported contents of selenium into the tomato fruits were highest as 0.302 ppm in the plot of foliar application plus drenching of chelated-Se. Also, it had tended to be higher in the plot of foliar application plus drenching than in the plots of foliar application or drenching in both of Se and chelated-Se. Foliar application and drenching of organic chelated-Se were effective to produce the functional tomato fruits.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.376-383
• /
• 2022

The current study, which consisted of two independent studies (laboratory and greenhouse), was carried out to project the hypothesis fungi-spray scheduling for leaf mold and gray leaf spot in tomato, as well as to evaluate the effect of temperature and leaf wet duration on the effectiveness of different fungicides against these diseases. In the first experiment, tomato leaves were infected with 1 × 10⁴ conidia·mL^-1 and put in a dew chamber for 0 to 18 hours at 10 to 25℃ (Fulvia fulva) and 10 to 30℃ (Stemphylium lycopersici). In farm study, tomato plants were treated for 240 hours with diluted (1,000 times) 30% trimidazole, 50% polyoxin B, and 40% iminoctadine tris (Belkut) for protection of leaf mold, and 10% etridiazole + 55% thiophanate-methyl (Gajiran), and 15% tribasic copper sulfate (Sebinna) for protection of gray leaf spot. In laboratory test, leaf condensation on the leaves of tomato plants were emerged after 9 hrs. of incubation. In conclusion, the incidence degree of leaf mold and gray leaf spot disease on tomato plants shows that it is very closely related to formation of leaf condensation, therefore the incidence of leaf mold was greater at 20 and 15℃, while 25 and 20℃ enhanced the incidence of gray leaf spot. The incidence of leaf mold and gray leaf spot developed 20 days after inoculation, and the latency period was estimated to be 14-15 days. Trihumin fungicide had the maximum effectiveness up to 168 hours of fungicides at 12 hours of wet duration in leaf mold, whereas Gajiran fungicide had the highest control (93%) against gray leaf spot up to 144 hours. All the chemicals showed an around 30-50% decrease in effectiveness after 240 hours of treatment. The model predictions in present study could be help in timely, effective and ecofriendly management of leaf mold disease in tomato.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.167-173
• /
• 2014

This research was conducted to establish appropriate methods to prune tomato side stems during summer. Cherry tomatoes "Unicorn" (Monsanto Korea, Korea) were grown in the coir based growing medium, and irrigation was controlled time based system. There were three pruning treatments: 1) removing all side stems (ACUT), 2) remaining two leaves on the side stems right below any cluster (PCUT), and 3) remaining two leaves on all side stems (LEFT). Experimental results showed that the occurrence of swollen stems, a symptom of nutrient excess, was influenced by side stem pruning due to blocking of consumption of photosynthetic products. The photosynthetic rate was not different between leaves on main stem and those on side shoots. Therefore the differences in the total amounts of photosynthetic products seemed to come out from the differences in leaf areas on each treatments, influencing on fruit yield difference. The yields and harvesting rates were better in ACUT treatment when tomato plants were harvested until $5^{th}$ cluster, however tomato yield was higher in LEFT treatment when more then $5^{th}$ clusters were harvested.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.320-324
• /
• 2001

This study was conducted to investigate the effects of mechanical stimulation and growth regulators known to control overgrowth in hot temperature tomato transplants on the seedling quality and the growth and yield after planting. Brushing and impedance were applied as mechanical stimulation, and diniconazole and hexaconazole as chemical growth regulator were used in various ways at different concentrations and treatment times. Diniconazole treatment regardless of concentration and treatment times reduced plant height, leaf area and fresh weight of young plant. Though treatments of high concentration and many times reduced the yield of tomato after planting, these of proper amount and proper times maintained the level of control. Hexaconazole treatment controlled less plant height of transplants than diniconazole, and its effect also didn't support continuously after planting. However, hexaconazole treatment reduced the yield due to little fruit number and malformed plants, and also delayed the harvesting time as compared to the control. Both brushing and impedance controlled plant height of transplants. However, impedance treatment reduced the yield due to malformed plants after planting, and also delayed the harvesting time, while brushing treatment didn't reduced growth and yield as compared to the control. From the above results, it was thought that proper application of brushing and diniconazole can control excessive overgrowth without reducing yield.