• Geomechanics and Engineering
• /
• 제22권1호
• /
• pp.35-48
• /
• 2020

This paper provides methods for the deterministic and reliability-based design of the support pressures necessary to prevent tunnel face collapse. The deterministic method is developed by extending the use of the unique load multiplier, which is embedded within OptumG2/G3 with the intention of determining the maximum load that can be supported by a system. Both two-dimensional and three-dimensional examples are presented to illustrate the applications. The obtained solutions are validated according to those derived from the existing methods. The reliability-based method is developed by incorporating the Response Surface Method and the advanced first-order second-moment reliability method into the bisection algorithm, which continuously updates the support pressure within previously determined brackets until the difference between the computed reliability index and the user-defined value is less than a specified tolerance. Two-dimensional reliability-based support pressure is compared and validated via Monte Carlo simulations, whereas the three-dimensional solution is compared with the relationship between the support pressure and the resulting reliability index provided in the existing literature. Finally, a parametric study is carried out to investigate the influences of factors on the required support pressure.

• 한국군사과학기술학회지
• /
• 제14권1호
• /
• pp.114-122
• /
• 2011

In this paper, we have identified the system instability factors in a bistatic radar system using pulse chasing and considered their effects on the bistatic receiver's MTI(Moving Target Indication) improvement performance. The pulse chasing is a method to efficiently scan a restricted search area within the limited transmitter power and time in a bistatic radar and to track a series of transmitted pulses using the receiver beam which has ideally matched to the pulse propagation rate. In this paper, we have discussed the interrelationship between the pulse chasing and time and frequency/phase synchronization and described the effects of the identified system instability factors on two kinds of MTI filter configuration, single delay-line and double delay-line, in the bistatic radar. And also, we have confirmed that the overall system improvement is restricted by a lower improvement factor among identified them, and discussed the allowable tolerance of the time and frequency/phase synchronization in the bistatic system.

• 한국정보처리학회논문지
• /
• 제5권6호
• /
• pp.1639-1651
• /
• 1998

본 논문에서는 RESO(REcomputation with Shifted Operands)와 같은 시간 결함허용 기법을 이용한 단일칩 컴퓨터의 결함허용성을 평가하기 위한 분석 및 시뮬레이션 모델을 제안한다. 단일칩으로 들어오는 모든 작업은 이중화 처리된다고 가정하고 1차 작업과 2차 작업의 효율적인 처리를 위한 세가지 스케쥴링 방법들을 제안하고 분석한다. 고안된 스케쥴링 방법들은 결함과 결함허용으로 인한 응답시간 지연이 시스템의 비용에 미치는 영향을 단일칩의 부하와 결함발생율에 따라서 평가한다. 제안된 모델을 사용하면 비용, 단일칩의 부하 및 결함발생율과 같은 실험 파라미터에 기초한 최적 지연($\kappa$)를 가지는 결함허용 스케쥴을 구할 수 있다.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1654-1663
• /
• 2015

Compared to LC resonance, LCL resonance has distinct advantages such as a large resonant capability, low voltage and current stresses of the power device, constant voltage or current output characteristics, and fault-tolerance capability. Thus, LCL resonant compensation is employed for a movable Inductive Contactless Power Transfer (ICPT) system with a multi-load in this paper, which achieves constant current output characteristics. Peculiarly, the primary side adopts a much larger compensation inductor than the primary leakage inductor to lower the reactive power, reduce the input current ripple, generate a large current in the primary side, and realize soft-switching. Furthermore, this paper proposes an approximate resonant point for large inductor-ratio LCL resonant compensation through fundamental wave analysis. In addition, the PWM control strategy is used for this system to achieve constant current output characteristics. Finally, an experimental platform is built, whose secondary E-Type coils can ride and move on a primary rail. Simulations and experiments are conducted to verify the effectiveness and accuracy of both the theory and the design method.

• 한국정보처리학회논문지
• /
• 제4권6호
• /
• pp.1464-1480
• /
• 1997

분산 시스템은 높은 성능, 결함 허용성, 정보와 자원의 공유 등을 이룰 수 있는 환경을 제공한다. 그러나 분산 시스템 내에서 발생하는 사건과 상태들을 적절히 관리하지 못하면 이러한 장점의 혜택을 받을 수 없게 된다. 이러한 사건과 상태들은 성능 저하, 동작 오류, 수상한 행위 등의 징후가 될 수 있으므로 자세히 분석되어야 한다. 사건/상태를 적절히 관리하려면 이들을 명세하고 효율적으로 탐지할 수 있어야 한다. 본 논문에서는 사건/상태의 중앙 집중 탐지 알고리즘에 대해 설명한다. 다음 계층적 구조를 갖는 분산 시스템에서 이 탐지 알고리즘을 분산화 하는 방안에 대해 설명한다. 분산 알고리즘은 사건/상태 탐지 임무를 부임무들로 분해하는 과정과 부임무들을 적절한 노드들에 할당하는 과정으로 구성된다. 또 이 분산 탐지 알고리즘이 결함 허용성을 갖도록 하는 방안에 대해서도 설명한다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제15권2호
• /
• pp.123-130
• /
• 2007

The Hsp 20.8 and Hsp 90 cDNA sequence retrieved from NCBI database and consists of 764 bp and 2582 bp lengths respectively. The corresponding cDNA homologus sequences were BLAST searched in Bombyx mori genomic DNA database and two genomic contigs viz., BAAB01120347 and AADK01011786 showed maximum homology. In B. mori Hsp 20.8 and Hsp 90 is encoded by single gene without intron. Specific primers were used to amplify the Hsp 20.8 gene and Hsp 90 variable region from genomic DNA by using the PCR. Obtained products were 216 bp in Hsp 20.8 and 437 bp in Hsp 90. There was no variation found in the six silkworm races PCR products size of contrasting response to thermal tolerance. The comparison of the sequenced nucleotide variations through multiple sequence alignment analysis of Hsp 90 variable region products of three races not showed any differences respect to their thermotolerance and formed the clusters among the voltinism. The comparison of aminoacid sequences of B. mori Hsps with dipteran and other insect taxa revealed high percentage of identity growing with phylogenetic relatedness of species. The conserved domains of B. mori Hsps predicted, in which the Hsp 20.8 possesses ${\alpha}-crystallin$ domain and Hsp 90 holds HATPase and Hsp 90 domains.

• 한국CDE학회논문집
• /
• 제16권5호
• /
• pp.380-389
• /
• 2011

Esthetic appeal of a product is often affected by the appearance quality of seams forming between components of the product. The appearance quality of seams is, however, assessed in a very subjective and qualitative manner that heavily depends on the evaluator. This paper presents a preliminary study to quantify such assessment by formulating a quantitative index which is a linear function of the seam gap sizes, seam gap ranges, and the size uniformity of seam gaps. By considering a highly simplified problem of a drawer system and utilizing subjective assessments by twenty evaluators, the index has been formulated. The validity of this index has been confirmed by observing its behavior with changes of the component tolerances. Also, the utility of this index has been demonstrated through a selective assembly scheme applied to the drawer system problem. Though the index formulated in this study for seam appearance quality may be useful, future studies are necessary to make the model readily applicable to real problems.

• 복식문화연구
• /
• 제17권1호
• /
• pp.15-27
• /
• 2009

The purpose of this study was to find texture which suitable for the acryl knitted jacket of women in the middle age. The study was carried out 2 parts. The first part was to choose the pattern fitted in the body shape of women in the middle age, and the second part was wearing test with 3 different textured acryl knitted jacket(half milano, milano, jacquard). The usable data of the test were coded for further statistical analysis including descriptive statistics (frequency and one way-ANOVA test, Student-Newman-Keuls Multiple Range Test) by using SPSSWIN 12.0. The results were as follows: It was found that first evaluation for the appearance test on fitness, pattern B(Brand: Morado) were better than the rest of them(pattern A: Trieste, pattern C: Escalier). It was found that second evaluation for the test, jacket with jacquard were better than the rest of them. Acryl knitted Jacket of women in the middle age should made of jacquard. Therefore it should be designed as possible as considering the physical characteristics of knitted materials. It was found that third evaluation for the test, it was opposite results that a general knitted fabric pattern was made smaller than a woven jacket. So, it was necessary that the acryl knitted jacket of women in the middle age follow a similar site tolerance such as a woven jacket. This result was due to a radical change of a middle age women's body shape.

• 천문학회보
• /
• 제39권2호
• /
• pp.100.2-100.2
• /
• 2014

The DOTIFS is a new multi-object Integral Field Spectrograph (IFS) planned to be designed and built by the Inter-University Center for Astronomy and Astrophysics, Pune, India, (IUCAA) for cassegrain side port of the 3.6m Devasthal Optical Telescope (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences, Nainital. (ARIES) It is a multi-integral field unit (IFU) spectrograph which has 370-740nm wavelength coverage with spectral resolution R~1200-2400. Sixteen IFUs with microlens arrays and fibers can be deployed on 8 arcmin field. Each IFU has $8.7^{{\prime}{\prime}}{\times}7.4^{{\prime}{\prime}}$ field of view with 144 spaxel elements. 2304 fibers coming from IFUs are dispersed by eight identical spectrographs with all refractive and all spherical optics. In this work, we show optical design of the DOTIFS spectrograph. Expected performance and result of tolerance and thermal analysis are also shown. The optics is comprised of f=520mm collimator, broadband filter, dispersion element and f=195mm camera. Pupil size is determined as 130mm from spectral resolution and budget requirements. To maintain good transmission down to 370nm, calcium fluoride elements and high transmission optical glasses have been used. Volume Phase Holographic grating is selected as a dispersion element to maximize the grating efficiency and to minimize the size of the optics. Detailed optics design report had been documented. The design was finalized through optical design review and now ready for order optics.

• KSBB Journal
• /
• 제32권2호
• /
• pp.153-159
• /
• 2017

The purpose of this study was to investigate the probiotic properties of lactic acid bacterial strains isolated from human feces. The properties were tested on the basis of guideline for probiotic selection protocol such as tolerance for acid or bile salt, autoaggregation, antibiotic resistance, and antimicrobial activity. Total 25 lactic acid bacteria were isolated from human feces, and their antibacterial activity was tested against Staphylococcus aureus, Escherichia coli, E. coli O157:H7, Vibrio parahaemolyticus, V. alginolyticus using an agar diffusion assay. Among them, 4 selected strains were identified by analysis of their 16S rRNA, as Lactobacillus rhamnosus MG316, L. acidophilus MG501, L. reuteri MG505, and L. gasseri MG570. Results show that resistance to low pH and bile salts. Also, the selected strains were resistant to bile acid up to 3% and their autoaggregation rates were as high as 60%. All strains tested were resistance to nalidixic acid and kanamycin.