• Journal of Astronomy and Space Sciences
• /
• 제17권1호
• /
• pp.67-76
• /
• 2000

2002년에 발사 예정인 과학 위성 1호의 주 탑재체로 원자외선 분광기가 실릴 예정이다. 원자외선 분광기는 영상과 함께 분광의 기능을 함께 수행을 하게 되는데, 이를 위해 광학적인 요소로서 포물 원통 반사경, 슬릿, 타원형 회절 반사경, 그리고 MCP가 사용된다. 천문학적 관측 목표의 달성을 위한 각 광학 요소의 생산 오차와 위치 오차의 허용 한계를 구하였으며, 이 과정에서 도식적 단순화를 통해 민감도표를 해석하여 각 광학 요소의 조작 범위와 정밀도 등을 구하였다. 선형 오차의 경우 $15{\mu}m$, 각 오차의 경우 2' 이내의 정밀도로 광학적 요구 조건을 만족할 수 있을 것이다.

• Journal of Welding and Joining
• /
• 제22권6호
• /
• pp.19-24
• /
• 2004

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power $CO_{2}$ laser. The main factor of weld quality of laser welding is gap and edge quality. This work was preformed to focus on the gap tolerance problem during laser welding. First, bead on plate welding of thin sheet was examined to investigate the effect of laser welding variables, and to obtain optimum welding condition. Butt welding was also carried out to show the effect of gap on the laser weldability of thin sheet. In order to investigate the effect of gap on formability of welded thin sheet, LDH test was caried out. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too much heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about $80{\%}$ value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

• 한국ITS학회 논문지
• /
• 제17권5호
• /
• pp.135-142
• /
• 2018

본 논문은 수중 음향 채널 환경에 따른 CDMA(code division multiple access)와 OFDM(orthogonal frequency division multiplexing) 전송기법의 장단점을 비교 분석한다. 이를 위해서 r.m.s.(root mean square) 지연시간과 도플러 주파수 그리고 다중 경로의 수를 변화시켜가며 다양한 수중 음향 채널에서 전산 모의실험을 수행하였다. r.m.s. 지연시간과 도플러 주파수가 각 전송기법의 설계치 내의 수치이며 동일한 전송률을 갖는 경우 CDMA가 OFDM에 비해 우수한 성능을 갖는 것을 보였다. 그러나 도플러가 설계치보다 큰 경우에는 CDMA의 성능이 저하되어 OFDM이 CDMA보다 우수한 것을 보였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.103-103
• /
• 2017

Vigorous root growth at the seedling stage in dry direct-seeded conditions is considered as a critical trait because it is involved in seedling emergence, early vegetative vigour, nutrient uptake as well as drought tolerance. In this study, we performed QTL mapping using the recombinant inbred lines obtained from the cross between Tongil-type Dasan and temperate japonica TR22183 (DT-RILs) to identify QTL underlying early root development. TR22183, which was previously reported to have high nitrogen utility and cold tolerance, showed vigorous root growth at the seedling stage in semi-drought conditions. Root length, fresh weight and dry weight of TR22183 were significantly higher than in Dasan. By QTL analysis with genotyping-by-sequencing method, we identified two QTLs for root fresh weight (RFW) in chromosome 7 and root dry weight (RDW) in chromosome 8, explaining phenotypic variances of 13.5% and 10.6%, respectively. These QTLs would be used to develop rice varieties adapted to direct-seeded cultivating system.

• BMB Reports
• /
• 제42권5호
• /
• pp.271-276
• /
• 2009

Sweetpotato (Ipomoea batatas (L). Lam.) is relatively tolerant to unfavorable growth conditions such as drought, yet has not been exploited to provide a better understanding of the molecular basis of drought stress tolerance. We obtained 983 high-quality expressed sequence tags of 100 bp or longer (average length of 700 bp) from cDNA libraries of detached white fibrous root tissues by subjecting them to dehydration for 6 h. The 431 cDNAs were each assigned a function by alignment using the BLASTX algorithm. Among them, three genes associated with various abiotic stresses and nine genes not previously associated with drought stress were selected for expression pattern analysis through detailed reverse transcription-polymerase chain reaction. The direct and indirect relationships of the 12 genes with drought tolerance mechanisms were ascertained at different developmental stages and under various stress conditions.

• 정보처리학회논문지A
• /
• 제8A권2호
• /
• pp.81-90
• /
• 2001

인터넷의 급속한 확산으로 인하여, 컴퓨터 시스템의 규모 및 복잡도가 점차 증가하고 있으며, 컴퓨터 시스템에 대한 높은 수준의 가용도 요구 조건을 충족시키기 위해, 하드웨어적.소프트웨어적 결함 허용 기법에 대한 연구가 활발하다. 소프트웨어 재활 기법은 서버에 탑재된 소프트웨어의 장시간 가동에 따른 소프트웨어 노화 현상을 다루고 있으며, 서버에서 실행중인 소프트웨어의 수행을 고의적으로 멈춘 후에 결함 발생 가능성이 낮은 초기 상태에서 이를 다시 가동시키는 소프트웨어적 결함 예방 방법의 일종이라 볼 수 있다. 본 연구에서는 주-여분 서버 시스템에서의 작업전이 시간이 소프트웨어 재활에 미치는 영향을 연구하였으며, 가용도 분석을 통해서 작업전이 시간이 재활 정책을 결정함에 있어서 중요한 요소임을 발견하였다.

• Journal of Plant Biotechnology
• /
• 제38권1호
• /
• pp.77-86
• /
• 2011

Alcohol dehydrogenase (E.C.1.1.1.1) is an enzyme present in higher plants involved in the anaerobic fermentation pathway that catalyzes the reduction of pyruvate to ethanol, resulting in continuous $NAD^+$ regeneration. It also plays an important role in many plant developments including tolerance to anoxia condition. Here, a cDNA clone encoding alcohol dehydrogenase (ADH) was isolated from Chinese cabbage (Brassica rapa) seedlings. The gene named Bradh1 had a total length of 1,326 bp that contains a single open reading frame of 1,140 bp. The predicted protein consists of 379 amino acid residues with a calculated molecular mass of 41.17 kDa. Expression pattern analysis revealed a tissue-specific expressing gene in different tissues and strongly expressed in the shoot, roots and seeds of Chinese cabbage. Agrobacterium transformation of full-length cDNA Bradh1 into rice Gopumbyeo showed high efficiency. Furthermore, induction of ADH in transgenic rice enhanced tolerance to anaerobiosis stresses and elevated mRNA transcripts. The overexpression of Bradh1 in rice increases germination under anaerobiosis stresses, implying the possibility of developing new varieties suited for direct seeding or flood-prone rice field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.110-113
• /
• 2006

This paper describes the development process of body and full vehicle for reduced idle vibration through the data level of frequency and sensitivity. The vibration mode map is used to separate body structure modes from resonance of engine idle nm and steering system. This paper describes the analysis approach process to reduce the variation of uncertainties for idle vibration performance at initial design stage. The robust design method is performed to increase the stabilization performance under vehicle vibration. It is used to predict the effects of the stiffness deviation according to the spot welding condition of the body structure. The tolerance associated with hood over slam bumper is analyzed for the quality deviation of the moving system in full vehicle. And the glass sealant stiffness and weight difference is considered for the deviation characteristic. The design guideline is suggested considering sensitivity about body and full vehicle by using mother car at initial design stage. It makes possible to design the good NVH performance and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• Kyungpook Mathematical Journal
• /
• 제48권4호
• /
• pp.665-684
• /
• 2008

Runge-Kutta-Nystr$\"{o}$m (RKN) methods provide a popular way to solve the initial value problem (IVP) for a system of ordinary differential equations (ODEs). Users of software are typically asked to specify a tolerance ${\delta}$, that indicates in somewhat vague sense, the level of accuracy required. It is clearly important to understand the precise effect of changing ${\delta}$, and to derive the strongest possible results about the behaviour of the global error that will not have regular behaviour unless an appropriate stepsize selection formula and standard error control policy are used. Faced with this situation sufficient conditions on an algorithm that guarantee such behaviour for the global error to be asympotatically linear in ${\delta}$ as ${\delta}{\rightarrow}0$, that were first derived by Stetter. Here we extend the analysis to cover a certain class of ODEs with low-order derivative discontinuities, and the class of ODEs with constant delays. We show that standard error control techniques will be successful if discontinuities are handled correctly and delay terms are calculated with sufficient accurate interpolants. It is perhaps surprising that several delay ODE algorithms that have been proposed do not use sufficiently accurate interpolants to guarantee asymptotic proportionality. Our theoretical results are illustrated numerically.

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.248-255
• /
• 2016

Machining error makes the uncertainty of dimensional accuracy of the kinematic structure of a parallel robot system, which makes the uncertainty of kinematic accuracy of the end-effector of the parallel robot system. In this paper, the tendency of trajectory tracking error caused by the tolerance of design parameters of the parallel robot is analyzed. For this purpose, all the position errors are analyzed as the manipulator is moved on the target trajectory. X, Y, Z components of the trajectory errors are analyzed respectively, as well as resultant errors, which give the designer of the manipulator the intuitive and deep understanding on the effects of each design parameter to the trajectory tracking errors caused by the uncertainty of dimensional accuracy. The research results shows which design parameters are critically sensitive to the trajectory tracking error and the tendency of the trajectory tracking error caused by them.