• 제목/요약/키워드: tolerance analysis

검색결과 1,390건 처리시간 0.027초

비정규 측정오차의 경우 측정시스템 변동과 PTR 추정 (Estimations of Measurement System Variability and PTR under Non-normal Measurement Error)

  • 장무성;김상부
    • 품질경영학회지
    • /
    • 제35권1호
    • /
    • pp.10-19
    • /
    • 2007
  • ANOVA is widely, used for measurement system analysis. It assumes that the measurement error is normally distributed, which nay not be seen in some industrial cases. In this study the estimates of the measurement system variability and PTR (precision-to-tolerance ratio) are obtained by using weighted standard deviation for the case where the measurement error is non-normally distributed. The Standard Bootstrap method is used foy estimating confidence intervals of measurement system variability and PTR. The point and confidence interval estimates for the cases with normally distributed measurement error are compared to those with non-normally distributed measurement errors through computer simulation.

Double-Input DC-DC Converter for Applications with Wide-Input-Voltage-Ranges

  • Hu, Renjun;Zeng, Jun;Liu, Junfeng;Yang, Jinming
    • Journal of Power Electronics
    • /
    • 제18권6호
    • /
    • pp.1619-1626
    • /
    • 2018
  • The output power of most facilities for renewable energy generation is unstable due to external environmental conditions. In distributed power systems with two or more sources, a stable output can be achieved with the complementary power supply among the different input sources. In this paper, a double-input DC-DC converter with a wide-input-voltage-range is proposed for renewable energy generation. This converter has the following advantages: the circuit is simple, and the input voltage range is wide and the fault tolerance is excellent. The operation modes and the steady-state analysis are examined. Finally, experimental results are illustrated to verify the correctness of the analysis and the feasibility of the proposed converter.

2-step Quadrature Phase-shifting Digital Holographic Optical Encryption using Orthogonal Polarization and Error Analysis

  • Gil, Sang Keun
    • Journal of the Optical Society of Korea
    • /
    • 제16권4호
    • /
    • pp.354-364
    • /
    • 2012
  • In this paper, a new 2-step quadrature phase-shifting digital holographic optical encryption method using orthogonal polarization is proposed and tolerance errors for this method are analyzed. Unlike the conventional technique using a PZT mirror, the proposed optical setup comprises two input and output polarizers, and one ${\lambda}$/4-plate retarder. This method makes it easier to get a phase shift of ${\pi}$/2 without using a mechanically driven PZT device for phase-shifting and it simplifies the 2-step phase-shifting Mach-Zehnder interferometer setup for optical encryption. The decryption performance and tolerance error analysis for the proposed method are presented. Computer experiments show that the proposed method is an alternate candidate for 2-step quadrature phase-shifting digital holographic optical encryption applications.

Study on CsRCI2D and CsRCI2H for improvement of abiotic stress tolerance in Camelina sativa L.

  • Lim, Hyun-Gyu;Kim, Hyun-Sung;Kim, Jung-Eun;Ahn, Sung-Ju
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.196-196
    • /
    • 2017
  • Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

  • PDF

개인의 개방성과 정서적 소외감이 본인 및 배우자의 혼외관계 용인에 미치는 영향 (The Effects of the Individual Openness and Emotional Isolation on the Tolerance of Extramarital Relationship)

  • 이원준;이희진
    • 한국콘텐츠학회논문지
    • /
    • 제19권12호
    • /
    • pp.336-345
    • /
    • 2019
  • 본 연구의 목적은 개인의 개방성과 정서적 소외감이 배우자의 혼외관계 용인에 미치는 영향과 함께, 본인의 혼외관계 용인의 매개효과를 실증적으로 규명하는 것이다. 남녀 655명을 대상으로 이들의 혼외관계인식과 관련요인들에 관한 설문조사를 실시하여 얻은 자료 분석 결과 밝혀진 주요 내용은 다음과 같다 첫째, '개방성'과 '정서적 소외감'이 배우자의 혼외관계 불용인에 미치는 직접효과는 유의하지 않았지만, 자신의 혼외관계 용인에 미치는 직접효과(개방성, .244***; 정서적 소외감, .164**)는 유의하였다. 둘째, '본인의 혼외관계 용인'과 '배우자 혼외관계 불용인' 간에는 강한 부적 상관(-.493**)이 있음이 확인되었다. 셋째, 개인의 개방성이 '배우자 혼외관계 불용인'에 미치는 효과에 '본인 혼외관계 용인'의 완전 매개효과(-.081; 하한값 -.140, 상한값 -.027 ), 그리고 '정서적 소외감'이 '배우자 혼외관계 용인'에 미치는 효과에 '본인의 혼외관계 용인'의 완전 매개효과(-.120; 하한값 -.189, 상한값 -.061 )가 각각 입증되었다. 개인의 개방성과 정서적 소외감이 배우자의 외도에 미치는 영향은 본인의 혼외관계에 대한 용인 수준에 의해서 결정적으로 영향을 받고, 본인의 혼외관계에 대한 인식이 배우자의 혼외관계에 대한 인식에 유의한 영향을 미칠 수 있다는 결론을 내리게 되었다. 연구결과를 토대로, 배우자 외도문제 대처와 관련하여 적용할 수 있는 실천적 함의를 모색하고 논의하였다.

침입감내기술 기반의 보안시스템 설계 및 구현 : 워게임체계를 중심으로 (Design and Implementation of Security System Based on Intrusion Tolerance Technology : Focus on Wargame System)

  • 이강택;이동휘;김귀남
    • 융합보안논문지
    • /
    • 제5권4호
    • /
    • pp.41-48
    • /
    • 2005
  • 오늘날 디지털혁명을 기반으로 한 세계화속에서 우리나라는 1990년대 후반부터 'IT 강국'으로 급부상하였으나, 이러한 정보화에 따른 역기능으로 해킹, 바이러스유포, 스팸릴레이, 피싱 등의 보안 침해사고가 매년 증가하여 정보사회 구현에 큰 걸림돌로 작용하고 있다. 이처럼 정보화의 역기능은 우리군의 국방체계에 대한 침해로 자연스레 연결되고 있으며, 이에 군은 국방체계에 대한 정보보호를 위해 다양한 노력을 기울이고 있으나, 점차 자동화, 지능화, 대중화, 분산화, 대규모화되고 있는 해킹수법들과 알려지지 않은 취약점이나 새로운 공격기법에 대해 효율적으로 대응하는데 한계가 있다. 따라서 국가안위와 직접적으로 연관될 수 있는 현 국방체계의 주요 운용 자원들(Resources)에 대한 가용성(Availability), 신뢰성(Reliability), 무결성(Integrity) 및 기밀성(Confidentiality) 등의 보장뿐만 아니라, 운용 시스템에 대한 예상치 못한 공격이나 침입행위가 발생하거나 또는 시스템 결함이 발생할 경우에도 무중단 시스템 운영을 보장하기 위한 체계 안정성(Safety)과 지속성(Maintainability)을 충족시켜주는 '의존성'(Dependability)에 대한 보장이 절실히 요구된다 하겠다. 본 연구는 국방체계의 의존성 보장을 통해 보안 및 무중단운영 요구를 충족시키고자 침입감내기술을 기반으로 하는 보안구조 설계 완성을 목표로 하였다. 이를 위해 침입감내시스템 구축에 요구되는 핵심기능들을 관련연구로 식별하였으며, 국방체계들중 구현대상체계로 선정한 워게임체계의 구조분석을 통해 보안상의 문제점을 식별하여 단계별 계층별 보안 메커니즘 제시하고 식별된 핵심 요구기능들을 구현하여 침입감내기술 기반의 국방체계 보안구조 설계를 완성하였다

  • PDF

저온에서 벼의 발아율 및 발아속도 관련 양적형질 유전자좌(QTL) 분석 (QTL Analysis of Germination Rate and Germination Coefficient of Velocity under Low Temperature in Rice)

  • 김진희;모영준;하수경;정지웅;정종민
    • 한국작물학회지
    • /
    • 제66권1호
    • /
    • pp.8-17
    • /
    • 2021
  • 자포니카 벼의 저온 스트레스 내성 증진을 위하여, RIL 계통을 이용하여 저온 스트레스 내성 QTL을 탐색하였다. 이를 통하여 (1) 5, 9번 염색체에서 저온발아에 관련한 '기호벼' 유래 QTL, qLTG5와 qLTG9를 확인하였으며, 7, 9번 염색체에서 저온 발아속도에 관련한 '밀양23호' 및 '기호벼' 유래 QTL, qOGCV7, qOGCV9를 확인하였다. (2) Duncan 검정결과, 그룹VII [qLTG5+qLTG9 (qOGCV9)], 그룹VIII [qLTG5+qOGCV7+qLTG9 (qOGCV9)]의 계통들이 저온 스트레스에 내성이 있는 것으로 확인 되었다. (3) 최근 발표된 RIL 집단 담수내성 계통과 비교한 결과, 저온 스트레스에도 내성이 있으면서 담수발아에도 내성이 있는 것으로 확인된 총 2개의 유망 유전자원을 선발하였다. 본 연구의 결과를 통해 저온 및 혐기 관련 QTL의 집적은 벼의 저온에서의 발아 및 초기 입모율을 높여 저온스트레스 내성 개선에 도움이 되는 것으로 판단 되었으며, 선발된 유망 계통은 향후 직파재배 품종 육성에 유용한 유전자원으로 활용되어 직파재배의 안정성 증대에 기여할 것으로 기대된다.

CFD를 이용한 기상청 지중온도의 피트부분 지중열원 유용성 평가에 관한 연구 (Effectiveness Assessment on the Soil Temperature of KMA as Ground Heat Source Using CFD in Pit Area)

  • 민준기;김정태
    • KIEAE Journal
    • /
    • 제8권5호
    • /
    • pp.49-54
    • /
    • 2008
  • The experimental of temperature, humidity and velocity was taken from the underground pit which utilized the system of ground heat source quite similar to the cool-pit system. Also, through CFD analysis, one could review the effectiveness of analysis of future alternatives. Furthermore, the temperature range of mock up cool-pit system was analyzed by inputting the weather data of annual average soil temperature provided by KMA(Korea Meteorological Administration) into the fluid simulation of anticipated heat distribution. Firstly, the difference between the temperature of air exhaust of the pit or the temperature of air supply of the compressor room and the experimental data for the month of May from the CFD analysis came out to be $0.6^{\circ}C$ and $0.9^{\circ}C$ respectively with tolerance of 3.1% and 4.7%. Secondly, the difference between the temperature of air exhaust of the Pit or the temperature of air supply of the compressor room and the experimental data for the month of July from the CFD analysis came out to be $0.8^{\circ}C$ and $1.1^{\circ}C$ respectively with tolerance of 3.3% and 4.5%. Thirdly, for the month of May, the difference between the experimental data taken for the air exhaust of the Pit or the air supply of the compressor room and soil temperature provided by KMA for monthly and yearly average temperature of Jeonju region came out be $1.9^{\circ}C$ and $1.8^{\circ}C$ respectively with tolerance of 10.7% and 9.8%. Fourthly, for the month of July, the difference between the experimental data taken for the air exhaust of the Pit or the air supply of the compressor room and soil temperature provided by KMA for monthly and yearly average temperature of Jeonju region came out be $1.1^{\circ}C$ and $1.4^{\circ}C$ respectively with tolerance of 4.5% and 5.8%. The result of above experiments allowed us to establish CFD model set up as a verification tool that is based on experimental data collected within the Pit area. Also, one could confirm the possibility to apply weather data of soil temperature provided by KMA in order to anticipate proper value for CFD analysis.