• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.539-547
• /
• 2021

Helicopter rotor blade is required to be designed by considering the interacting effects among aerodynamics, flexibility, and controllability. The reverse design allows the structural components to have common characteristics by using the configuration numerics and experimental results. This paper aims to design the composite rotor blade which will feature common characteristics with that of BO-105. The present engineering design procedure is done by dividing the rotor blade into a few sections and composite laminates across the cross section. For each section, variational asymptotic beam sectional analysis (VABS) program is used to evaluate its flapwise, lagwise, and torsion stiffnesses to have discrepancy smaller than certain tolerance. Finally, CAMRAD II is used to predict the stress acting on the rotor blade during the specific flight condition and to check whether the present deign is structurally valid.

• Composites Research
• /
• v.20 no.5
• /
• pp.56-63
• /
• 2007

An approach using complex potentials is presented for analysis of composite plate with an elliptical hole or a rectilinear crack. Composite structure is susceptible to encounter impact damages, which lead to considerable decrease in its residual strength. Such impact damages could be modeled as an equivalent elliptical hole or notch-like crack. Even though finite element method is widely used to analyze stresses or fracture mechanics parameters around such damage, it is tedious to make successive FE-modeling for damage tolerance assessment under fatigue loadings. In this point of view, the solutions based on complex potentials are very simple and easy to use. The computed results are also compared and discussed with those from FEA.

• Animal Bioscience
• /
• v.37 no.4
• /
• pp.576-590
• /
• 2024

Objective: The objective of this study was to identify genes associated with 305-day milk yield (MY) and fat yield (FY) that also influence the adaptability of the Thai multibreed dairy cattle population to tropical conditions. Methods: A total of 75,776 imputed and actual single nucleotide polymorphisms (SNPs) from 2,661 animals were used to identify genomic regions associated with MY and FY using the single-step genomic best linear unbiased predictions. Fixed effects included herd-year-season, breed regression, heterosis regression and calving age regression effects. Random effects were animal additive genetic and residual. Individual SNPs with a p-value smaller than 0.05 were selected for gene mapping, function analysis, and quantitative trait loci (QTL) annotation analysis. Results: A substantial number of QTLs associated with MY (9,334) and FY (8,977) were identified by integrating SNP genotypes and QTL annotations. Notably, we discovered 17 annotated QTLs within the health and exterior QTL classes, corresponding to nine unique genes. Among these genes, Rho GTPase activating protein 15 (ARHGAP15) and catenin alpha 2 (CTNNA2) have previously been linked to physiological traits associated with tropical adaptation in various cattle breeds. Interestingly, these two genes also showed signs of positive selection, indicating their potential role in conferring tolerance to trypanosomiasis, a prevalent tropical disease. Conclusion: Our findings provide valuable insights into the genetic basis of MY and FY in the Thai multibreed dairy cattle population, shedding light on the underlying mechanisms of tropical adaptation. The identified genes represent promising targets for future breeding strategies aimed at improving milk and fat production while ensuring resilience to tropical challenges. This study significantly contributes to our understanding of the genetic factors influencing milk production and adaptability in dairy cattle, facilitating the development of sustainable genetic selection strategies and breeding programs in tropical environments.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.479-484
• /
• 2007

This paper explains the design and implementation of the FRA(Fault Recovery Agent). FRA is a system that is suitable for recovering software error for multimedia distance education based on home network environment. In terms of distributed multimedia systems, the most important catagories for quality of service are a timeless, volume, and reliability. In this paper, we discuss a method for increasing reliability through fault tolerance. This paper explains a performance analysis of an error recovery system running on distributed multimedia environment using rule-based DEVS modeling and simulation techniques. In DEVS, a system has a time base, inputs, states, outputs, and functions. The proposed method is more efficient than the other method in comparison with error ration and processing time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1116-1121
• /
• 2014

Mesh structure is one of typical interconnection networks, and it is used in the part of VLSI circuit design. Torus and Hyper-Torus are advanced interconnection networks in the part of diameter and fault-tolerance of mesh structure. In this paper, we will analyze embedding between Torus and Hyper-Torus networks. We will show T(4k,2l) can be embedded into QT(m,n) with dilation 5, congestion 4, expansion 1. And QT(m,n) can be embedded into T(4k,2l) with dilation 3, congestion 3, expansion 1.

• KIEAE Journal
• /
• v.8 no.5
• /
• pp.11-16
• /
• 2008

This research has established CFD model on pit's cool-tube system through heat and air movement simulations, of which data was based on experimental and verification. This research work verified the effectiveness of the cool-tube system by analysing temperature, humidity and air current of the actually installed case. Also, we analysed heat transfer through air current simulation and the results are as followings. Firstly, we experiment on temperature, humidity and speed of air currents of the cool tube system with pit space during the month of May (spring). The average exterior temperature was $16.1^{\circ}C$, and $18.2^{\circ}C$ for the pit, $24.7^{\circ}C$ for the compressor room. Secondly, based on measured data of real case, we have analysed heat transfer through air current simulation and verified our proposed model. The actual measurement of average temperature of exhaust air of the pit's area is $19.7^{\circ}C$ with tolerance of $-0.33^{\circ}C{\sim}-0.6^{\circ}C$ compared to above simulations. Thirdly, having verified air current simulation model with formation of 260,000 and 1,000,000 cells, we could get reasonable near values with 260,000 cells. Lastly, the next step of research would be focused on proposing the best possible pit's cool-tube system after analysis of heat transfer of the air current simulation based on verified CFD model.

• Journal of the Korean Society of Costume
• /
• v.63 no.8
• /
• pp.188-208
• /
• 2013

This study aims to find out factors of historical specialty and cultural ethnicity that influenced the formation of Spanish fashion as well as examine the characteristics of Spanish fashion by comparing its historical costumes, such as folk costume and court costume with contemporary fashion of major Spanish designers in the 20th century. Documental investigation and analysis of visual materials were used as research method. The study results are as follows: The major factors that affected the characteristics of Spanish fashion in the history include the geographical features, invasion of foreign nations, cultural heritage of various ethnic groups, strengthening of the national power, advancement of international trading through the newly developed routes, and influence of religions such as Christianity, Islam, and Judaism. Featuring the coexistence of variety and heterogeneity, the ethnicity reflected in the culture harmoniously embraces various spirits such as conflict and coexistence, individualism and collectivism or regionalism, and exclusion and tolerance of religions. In addition, the characteristics in the cultural phenomena include passion, sensuousness, individualism, sense of reality, sense of chic, and the people-centeredness. The basic Characteristics of Spanish fashion include the sensuality of excessive zeal, decorativeness of gorgeous handicrafts, exoticism of people-centered variety, extreme contrast of harmony, touching artistry of chic, and fantastic surrealistic wits.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1231-1234
• /
• 2003

A sensor working in outdoor may generate some faulty signal owing to dust and high temperature. This paper describes an intelligent sensor system and controller which has a reconstruction mechanism for faulty signal. The faulty signals are dievided into two types as linear distortion and non linear distortion, respectively. The linear distorted signal is due to dust, and non linear distorted signal is due to physical breakdown of sensor or high temperature. These distorted signal have been reconstructed by the proposed method based on polynomial regression method and principal component analysis approach.. The proposed method has been applied to sun tracking system working in outdoor. For a robust and precision control of sun tracker, a fuzzy controller was also proposed. The fuzzy controller controls the tracker by using the collected sensor signal. The tolerance of the position control is within 1.5 degree. To show the validity of the developed system, some experiments in the field were illustrated.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.6
• /
• pp.593-600
• /
• 2003

This study was carried out in order to investigate the possibility of frozen rice batter for the manufacturing of Jeung-pyun. Despite of its unique taste and texture, Jeung-pyun is not consumed much because it needs long time to make. The physicochemical, sensory, rheological and surface characteristics of Jeung-pyun were analyzed to develop the easy manufacture method. The storage condition of rice batter was used at -2$0^{\circ}C$ up to 4 weeks. Statistical data analysis was completed using a SAS program. The results are summarized as follow: The pH brix% and sugar content of all samples which added low-temperature tolerance raw yeast or regular raw yeast decreased during the fermentation. Kind of yeast did not influence on the moisture content of the Jeung-pyun batter. Specific volume and carbon dioxide evolution of Jeung-pyun batter were highest when the rice batter was frozen for 1 week regardless of the kind of yeast. Overall quality of frozen batter of Jeung-pyim at -2$0^{\circ}C$ for 4 weeks had the highest score among different samples. As the test results of mechanical characteristics, cohesiveness, gumminess, brittleness, hardness and springiness did not show any significant differences statistically. The result clearly suggests that freezing the rice batter is a possibile way to manufacture Jeung-pyun.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.486-493
• /
• 2017

Refineries and chemical plants with isolated power systems that have a limited power supply are more susceptible to voltage changes from disturbances compared to power systems connected with a power company. Furthermore, most loads in such cases are induction motor loads, and therefore, transient voltage characteristics when starting a high-capacity motor must be examined. In general, high-capacity motors are customized appropriately to the load performance curve by the manufacturer during the construction of an industrial plant. Subsequently, when complying with the voltage drop permitted by international standards during the design process, power supply equipment such as transformers and generators is overdesigned. Therefore, a novel analysis is necessary on standards for startup and constraint voltage drops, as well as on identifying the voltage drop limitations for starting high-capacity motors in refineries and chemical plants with isolated power systems. In this study, field tests on an industrial plant were conducted, and simulations modeled under conditions identical to those of the field test system were performed using the general-purpose program ETAP in order to compare the results.