• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2011

Recently the increasing of vinyl and green houses and development of reclaimed land including Saemangeum induced the need for breeding salt-tolerant crops which can survive and grow in high salinity soil. So we try to develop salt-tolerant transgenic chrysanthemum (Dendranthema grandiflorum.) lines by using anti-porter gene TANHX and HVNHX. Through marker selection and plant regeneration step, we could get 284 putative transgenic chrysanthemum lines. On selected putative transgenic plants, 40 candidates were used for genetic analysis and 30 lines could be made up of target size band on PCR, so about 75% of marker selected lines were decided as real transgenic lines. Selected 284 transgenic lines were also used for salt-tolerance test as a range of NaCl 0.2 ~ 1.2% (300 mM). As a result of salt-tolerance test, 15 selected transgenic lines could live and grow on the continuous supply of 0.8% (200 mM) NaCl solution and another 7 lines were could survive under 1.2% (300 mM) NaCl solution. This salt-tolerant transgenic lines under salt stress also lead a cell alternation especially a guard cell. A stressed guard cell be swelled and grow larger in proportion to NaCl concentration. TTC test for cell viability on transgenic chrysanthemum lines pointed out that more strong salt-tolerant lines can be live more than another under same salt stress. The numerical value of strong salt-tolerant 7 transgenic lines were 0.206 ~ 0.331 under 1.2% NaCl stress, and then it's value is more larger than middle salinity lines' 0.114 ~ 0.193 and non-transgenic's 0.046. And the proline contents as indicated stress compound also pointed out that HVNHX introduced salt-tolerant transgenic lines were less stressed than other under same salt stress. The contents of strong salt-tolerant transgenic lines were 2.255 ~ 2.638 mg/kg and it is much higher than that of middle salinity lines' 1.496 ~ 2.125.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.5
• /
• pp.79-92
• /
• 2019

When asked about the success factors of successful entrepreneurs and celebrities, he says he was lucky. The remarkable fact is that the attitude about luck is different. However, despite the fact that the belief that we believe is lucky is actually a dominant concept, there has not been much scientific verification of luck. In this study, we saw good luck not being determined randomly by the external environment, but by being able to control luck through the internal attributes of individuals. This study is significant that we have empirically elucidated what kind of efforts have gained good luck, whereas previous research has largely ended in vague logic where luck ends up with an internal locus of control among internal entrepreneurial qualities and efforts can make a successful entrepreneur. We introduced the concept of good luck belief to avoid confirmation bias, which is, to interpret my experience in a direction that matches what I want to believe, and used a good luck belief questionnaire in previous studies and tried to verify that those who have a good belief can increase entrepreneurial opportunity capability through planned happenstance skills. The reason for choosing the entrepreneurial opportunity capacity as a dependent variable was based on the conventional research, that is, the process of recognizing and exploiting the entrepreneurial opportunity is an important part of the entrepreneurship research For empirical research, we conducted a questionnaire survey of a total of 332 people, and the results of the analysis turned out that the belief of good luck has all the positive impacts of planned happenstance skills' sub-factors: curiosity, patience, flexibility, optimism and risk tolerance. Second, we have shown that only the perseverance, optimism, and risk tolerance of planned happenstance skills' sub-factors have a positive impact on this opportunity capability. Thirdly, it was possible to judge that the sub-factors of planned happenstance skills, patience, optimism, and risk tolerance, had a meditating effect between belief in luck and entrepreneurial opportunity capability. This study is highly significant in logically elucidating that people in charge of business incubation and education can get the specific direction when planning a training program for successful entrepreneur to further enhance the entrepreneurial opportunity ability, which is an important ability for the entrepreneur's success.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.17-24
• /
• 2019

Purpose: The present study aims to assess the level of coherency and the accuracy of Point dose of the Isocenter of VERO, a linear accelerator developed for the purpose of the Stereotactic Body Radiation Therapy(SBRT). Materials and Method: The study was conducted randomly with 10 treatment plans among SBRT patients in Kyungpook National University Chilgok Hospital, using VERO, a linear accelerator between June and December, 2018. In order to assess the equipment's power stability level, we measured the output constancy by using PTW-LinaCheck, an output detector. We also attempted to measure the level of accuracy of the equipment's Laser, kV(Kilo Voltage) imaging System, and MV(Mega Voltage) Beam by using Tofu Phantom(BrainLab, Germany) to assess the accuracy level of geometrical Isocenter. We conducted a comparative analysis to assess the accuracy level of the dose by using an acrylic Phantom($30{\times}30{\times}20cm$), a calibrated ion chamber CC-01(IBA Dosimetry), and an Electrometer(IBA, Dosimetry). Results: The output uniformity of VERO was calculated to be 0.66 %. As for geometrical Isocenter accuracy, we analyzed the error values of ball Isocenter of inner Phantom, and the results showed a maximum of 0.4 mm, a minimum of 0.0 mm, and an average of 0.28 mm on X-axis, and a maximum of -0.4 mm, a minimum of 0.0 mm, and an average of -0.24 mm on Y-axis. A comparison and evaluation of the treatment plan dose with the actual measured dose resulted in a maximum of 0.97 % and a minimum of 0.08 %. Conclusion: The equipment's average output dose was calculated to be 0.66 %, meeting the ${\pm}3%$ tolerance, which was considered as a much uniform fashion. As for the accuracy assessment of the geometric Isocenter, the results met the recommended criteria of ${\pm}1mm$ tolerance, affirming a high level of reproducibility of the patient's posture. The difference between the treatment plan dose and the actual measurement dose was calculated to be 0.52 % on average, significantly less than the 3 % tolerance, confirming that it obtained predicted does. The current study suggested that VERO equipment is suitable for SBRT, and would result in notable therapeutic effect.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.409-422
• /
• 2022

Two dominant thrips in hot pepper (Capsicum annuum) cultivating in greenhouses are Frankliniella occidentalis and F. intonsa in Korea. This study investigated their overwintering physiology. These two thrips were freeze-susceptible and suppressed the body freezing temperature by lowering supercooling point (SCP) down to -15~-27℃. However, these SCPs varied among species and developmental stages. SCPs of F. occidentalis were -25.7±0.5℃ for adults, -17.2±0.3℃ for pupae, and -15.0±0.4℃ for larvae. SCPs of F. intonsa were -24.0±1.0℃ for adults, -27.0±0.5℃ for pupae, -17.2±0.8℃ for larvae. Cold injuries of both species occurred at low temperature treatments above SCPs. Thrips mortality increased as the treatment temperature decreased and its exposure period increased. F. occidentalis exhibited higher cold tolerance than F. intonsa. In both species, adults were more cold-tolerant than larvae. Two thrips species exhibited a rapid cold hardening because a pre-exposure to 0℃ for 2 h significantly enhanced the cold tolerance to a lethal cold temperature treatment at -10℃ for 2 h. In addition, a sequential exposure of the thrips to decreasing temperatures made them to be acclimated to low temperatures. To investigate the overwintering sites of the two species, winter monitoring of the thrips was performed at the greenhouses. During winter season (November~February), adults of the two species were not captured in outside of the greenhouses. However, F. occidentalis adults were captured to the traps and observed in weeds within the greenhouses. F. occidentalis adults were also emerged from soil samples obtained from the greenhouses during the winter season. F. intonsa adults did not come out from the soil samples at November and December, but emerged from the soil samples obtained after January. To determine the adult emergence due to diapause development, two thrips species were reared under different photoperiods. Adult development occurred in all photoperiod treatments in F. occidentalis, but did not in F. intonsa especially under short periods. Tomato spotted wilt virus, which is transmitted by these two species, was detected in the weeds infested by the thrips during the winter season. These results suggest that F. occidentalis develops on weeds in the greenhouses while F. intonsa undergoes a diapause in the soil during winter.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.199-210
• /
• 2011

The cables in cable-stayed bridges are under high stress and are very sensitive to vibration due to their small section areas compared with other members. Therefore, it is reasonable to evaluate the cable impact factor by taking into account the dynamic effect due to moving-vehicle motion. In this study, the cable impact factors were evaluated via moving-vehicle-load analysis, considering the design parameters, i.e., vehicle weight, cable model, road surface roughness, vehicle speed, longitudinal distance between vehicles. For this purpose, two steel composite cable-stayed bridges with 230- and 540-m main spans were selected. The results of the analysis were then compared with those of the influence line method that is currently being used in design practice. The road surface roughness was randomly generated based on ISO 8608, and the convergence of impact factors according to the number of generated road surfaces was evaluated to improve the reliability of the results. A9-d.o.f. tractor-trailer vehicle was used, and the vehicle motion was derived from Lagrange's equation. 3D finite element models for the selected cable-stayed bridges were constructed with truss elements having equivalent moduli for the cables, and with beam elements for the girders and the pylons. The direct integration method was used for the analysis of the bridge-vehicle interaction, and the analysis was conducted iteratively until the displacement error rate of the bridge was within the specified tolerance. It was acknowledged that the influence line method, which cannot consider the dynamic effect due to moving-vehicle motion, could underestimate the impact factors of the end-cables at the side spans, unlike moving-vehicle-load analysis.

• Korean Journal of Environment and Ecology
• /
• v.28 no.3
• /
• pp.302-313
• /
• 2014

This study was conducted to compare the characteristics of fish distribution according to sand type stream and cobble type stream the 4 stream selected every season. The collected Korea endemic species during the survey period were 24, including Acheilognathus gracilis. Dominant species of Hongcheon stream and Muju Namdae stream was Zacco koreanus, each accounting for 39.9% and 28.4% in order, and dominant species in Yanghwa stream was Rhodeus notatus, 13.6%, and those in Gap stream was Z. platypus, by 26.0%. As a result of community analysis, dominant index was 0.27~0.63, diversity index was 1.92~2.67, evenness index was 0.6~0.79, richness index was 3.09~3.53, and dominant index was the highest in Hongcheon stream, and the indices of diversity, evenness and richness were the highest in Yanghwa stream. As a result of tolerance guild analysis, Hongcheon stream and Muju Namdae stream with a variety of substrates accounted for relatively higher rate by 50.1% and 46.4% in sensitive species respectively, and Yanghwa stream and Gap stream with greater sand substrates had 0.5% and 5.3% scarce rate of sensitive species. As a result of similarity analysis using the species, population and substrate structures of the fisheries appeared in each stream, cobble type streams such as Hongcheon stream and Muju Namdae stream were the most similar by 50.4% in species and population, 95.2% in bed structure. As a result of IBI analysis, Hongcheon stream and Muju Namdae stream appeared as 'Class A,' Yanhwa stream and Gap stream as 'Class B' and the two groups of cobble type stream and sand type stream were divided as a result of principal components analysis.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.7
• /
• pp.71-81
• /
• 2017

Purpose - The purpose of this study is to investigate the relationship between customer trust and intention to return to the traditional market by using empirical analysis. Research design, data, and methodology - For the empirical analysis of this study, questionnaires were conducted for adults and over 20s. A total of 200 questionnaires were distributed to consumers with experience in traditional markets, and 163 of them were used for empirical analysis. In order to analyze the relationship between customer trust and return visit intention by consumers visiting the traditional market, variables were selected through 10 constructive concepts and revised based on previous studies. The SPSS for win 18.0 was used for data analysis. Results - In order to clarify the relationship between consumer's visit to traditional market and customer's trust, it was found that the tolerance values of both the visiting factors and the consumers' perceptions of traditional markets were higher than .01. In the relationship between visitor's visit to traditional market and customer's trust, price was positively related to customer trust at 0.1% level. Image, product quality and freshness of traditional market were 5% Positive effects were found. These results show that consumers who visit traditional markets gain customer's trust in price, image, product quality and reliability of traditional market. Conclusions - In this study, the results of this study are as follows: First, the effect of customer trust on customer satisfaction is affected by the image (emotion) consumers feel about traditional market, the trust level about the price of goods offered by the market, The confidence level of freshness, the reliability of consumers' connection with the local economy, the consumer's traditional marketplace, and the level of awareness of the service (kindness) of the variables on the independent variables. As a result of the analysis, it was found that among the influence variables of customer trust used in this study, consumers had a high level of confidence about the price of commodities offered by the market, quality of goods, and freshness, The same relationship, market environment such as hygiene or cleanliness, connection with a local economy, service (kindness) of traditional market did not affect consumers' trust in traditional markets.

• Korean Journal of Ecology and Environment
• /
• v.42 no.2
• /
• pp.212-220
• /
• 2009

In this study, we analyzed fish compositions and ecological characteristics such as trophic guilds and tolerance guilds in association with water quality characteristics in Masan Reservoir during November 2008. Total number of species were 12 species (6 families) and the dominant species were Zacco platypus, Hemiculter eigenmanni, and Pseudorasbora parva. We found three Korean endemic species and one exotic species, Carassius cuvieri. According to the analysis of ecological indicator characteristics, relative proportion of tolerant and omnivore species was 98% of the total indicating that probably, the fauna was influenced by physical habitat disturbance and physicochemical degradations. Fish distribution analysis along with littoral zone showed that the most fishes (${\sim}$95%) were observed in the littoral zone where emerged macrophytes were well developed. Also, substrate analysis indicated that the most species were found near silt area (11 species, 91.7%), so that the significant differences were found between the substrate types. Analysis of water quality indicated that concentrations of total phosphorus (TP) and chlorophyll-a (ChI-a) as a lake trophic indicator were judged as eutrophic states, respectively and COD as an indicator of organic matter pollution averaged 10.9 mg $L^{-1}$. Based on the water quality, this system were influenced by the nutrient enrichments and organic matter. The degradations of water quality in Masan Reservoir resulted in trophic compositions of fish (increase of omnivore species) and the dominance of tolerant fish. This Monitoring data may contribute changes of fish fauna and compositions in relation to habitat modifications and chemical water quality degradations in the future.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.119-125
• /
• 2022

Materials used for education are materials such as SM20C, Al6061, and acrylic. SM20C materials are carbon steel and are often used in certification tests and functional competitions, but are also widely used in industrial sites. The Al6061 material is said to be a material that has lower hardness and stronger flexibility than carbon steel, so it is a material that generates a lot of compositional selection of tools. If students are taught practical training using acrylic materials, vibration occurs due to excessive cutting in some parts and damage to the tool occurs. In this process, we examine to what extent the impact on the 2NC head, which is a five-axis equipment, can affect precision control. The weakest part of the five-axis equipment can be said to be the weakest part of the head that controls the AC axis. When the accuracy and cumulative tolerance of this part occur, the accuracy of all products decreases. Therefore, the core part of the 2NC head, the spindle housing, was carried out using an Al7075 T6 (Alcoa, USA) material. In the process of vibration and cutting applied to this material, the analysis was conducted to find out the value applied to the finite element analysis under extreme conditions. It is hoped that this analysis data will help students see and understand the structure of 5-axis machining rather than 5-axis cutting.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.