• 제목/요약/키워드: toe shape

검색결과 65건 처리시간 0.024초

성인 남성의 연령대별 발 형태 분류 (The Classification of Men's Foot Shape According to Age)

  • 이지은;권영아
    • 한국의류산업학회지
    • /
    • 제10권5호
    • /
    • pp.644-651
    • /
    • 2008
  • The health of foot is connected with individual's health and affects men's activity. In order to develope comfort socks, both foot size and foot shape must be considered. The purpose of this study was to categorize men's foot shape according to age using men's foot scan data (with 2005 Size Korea). Factor analysis, Cluster analysis, ANOVA, and Duncan's test were performed for statistical analysis of the data by SPSS Win 12.00 program. The results are as follows. 1. Nine factors constituting the men's foot were extracted through factor analysis and those factors comprised 77.7% of total variance. 2. On the basis of the cluster analysis, four different foot shapes were categorized. Cluster 1 was characterized by large in toe and ankle size. Cluster 2 was characterized by short foot length, low foot height, and small foot breadth/girth. Cluster 3 was characterized by large and high in foot height. Cluster 4 was characterized by short in foot length and large in foot breadth/girth. 3. Distribution of four foot shape clusters from 20 to 70 years in age above were categorized. For the 20 to 29 years in age, cluster 2, while for the over 30 years in age cluster 4 or cluster 3 is the most dominant foot type. A foot breadth in the 50 years over is wider size range than that in the below 49 years. The foot figures of elderly men over 60 years were smaller than those of below 60 years.

2D 데이터에 의한 여고생의 발바닥 유형 분석 (Classification of Sole Types for Female High School Students by 2D scan data)

  • 이정은;도월희
    • 한국의류산업학회지
    • /
    • 제15권6호
    • /
    • pp.977-984
    • /
    • 2013
  • This study classified the type of sole for female high school students and analyzed the characteristics of each type by the shape of the sole (plantar view) using 2D scan data. The data were collected from a foot anthropometry of 310 female high school students in Gwangju and Jeollanam-do. Left feet and right feet were measured indirectly by using flatbed scanner. The sole anthropometric measurements consisted of 24 items. The results of the investigation into the differences between left and right feet soles by the 2D measurements data indicated that there was no significant statistical differences in the length of items. The left sole had higher values than right sole in the width items and angle items; however, the lateral side of the right feet projected to the outside more often than left feet. In analyzing foot sole of female high school students, the shapes of sole were classified into three types. Type 1(41.94%), Type 2(36.77%), Type 3(21.29%). The most characteristic sole type for female high school students was Type 1. Type 1 referred to a narrow foot width with little or no curvature of the toe. Type 2 represented the longest foot, with foot width shown as a spacious and distinctive feature in width at the medial area of the foot. Type 3 represented the shortest and widest of ball width, gathered inside toe 5, and lateral side as the most projected among the three types.

보행주기에 따른 맞춤형 단하지보조기의 응력분포 특성 (The Stress Distribution Property on the Customized Ankle Foot Orthoses During the Gait Period)

  • 최영철;이근민;최화순
    • 한국정밀공학회지
    • /
    • 제25권3호
    • /
    • pp.165-175
    • /
    • 2008
  • An ankle-foot orthosis(AFO) is a brace for persons with gait disabilities to support or replace the function of ankle joint. Ankle-foot orthoses(AFO's) are usually prescribed to alleviate the drop-foot by constraining the excessive plantar flexion. The shape and the strength of the AFO are often based on 'trial and error' due to a lack of knowledge of the stress distribution in the AFO. In this study, an improved stress-freezing method was proposed to measure the stress distribution characteristics in the AFO. As a result, a photoelastic material with low freezing temperature was developed to measure the stresses under a person's direct contact loading condition. The three-dimensional stress-1rozen photoelastic models of AFO's for five stages of stance phase such as heel contact, foot flat, mid stance, heel off, and toe off were produced. The results of photoelastic analysis revealed that the stresses developed in the AFO were varied considerably from tensile to compressive or vice versa, during walking. At the posterior part of ankle joint in the AFO, the maximum compressive stress of 1.81MPa was observed in the mid stance, and the maximum tensile stress of 0.74MPa was observed during heel contact. The overall stress levels in the AFO's were low in the toe off phase. The results suggested that the posterior part of ankle joint might be the most fragile part in the AFO.

필렛용접이음부의 후처리에 따른 피로강도 향상 메커니즘의 연구 (The Study about the Fatigue Strength Improvement Mechanism by the Processing of Fillet Welded Joint)

  • 임청권;박문호;장준호
    • 한국강구조학회 논문집
    • /
    • 제11권3호통권40호
    • /
    • pp.319-327
    • /
    • 1999
  • 본 연구는 필렛용접 이음으로 된 종리브 십자 시험체를 대상으로 용접토우의 후처리에 의한 피로강도 향상의 메커니즘을 밝히고, 적절한 후처리법을 제안하고자 한다. 인장피로시험 결과, 용접 그대로의 시험체 보다는 후처리된 시험체들에서 피로강도 향상이 보였다. 특히, 피로균열 발생수명 $N_c$는 해머피닝(Hammer-Peening)후 그라인더 처리를 한 시험체에서, 그리고 피로균열 진전수명 $N_p$는 해머피닝 시험체 들에서 각각 증가현상을 보였다. 여기서, $N_c$는 용접토우의 기하학적 형상, 즉 응력집중의 완화때문에, 또한 $N_p$는 해머피닝에 의해 표면에 도입된 큰 압축잔류응력이 피로균열의 진전을 억제하고 있기 때문이라고 생각된다.

  • PDF

노년 여성의 발 유형분류 (Classification of Elderly Women's Foot Type)

  • 김남순;도월희
    • 한국의류학회지
    • /
    • 제38권3호
    • /
    • pp.305-320
    • /
    • 2014
  • This study identifies the foot shapes of elderly women by classifying foot type according to the 3D shape of the foot and 2D sole type analyzing individual characteristics. The subjects were 295 elderly women over 60 years of age who live in Gwangju. A foot scanner (K&I Technology $Nexcan^{(R)}$) was used to obtain three-dimensional shapes of feet and a flat bad scanner (HP Scanjet G2410) was used to obtain the two-dimensional shapes of soles. The anthropometric measuring items consisted of 59 items estimated on the right foot of each subject. Data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the SPSS 19.0 statistical program. To classify the side type of elderly women's feet, three-dimensional measurement data were analyzed for the 27 measurement items using factor analysis and 6 factors were extracted (inside height and side gradient, ankle thickness, toe height and midfoot size, lateral malleolus height, instep, and heel height and gradient). A cluster analysis resulted in three types: 36.5% belonged to Type 1 (high forefoot and high midfoot), 31.1% belonged to Type 2 (high forefoot and low midfoot), and 32.4% belonged to Type 3 (low forefoot and high midfoot). The distribution was relatively even. For the sole, 8 factors were extracted (ball width and medial foot protrusion, lateral foot protrusion, forefoot and hindfoot length ratio, ball gradient, heel size, toe breadth, lateral ball length, and foot length) and a cluster analysis resulted in three Types (Type H, Type D, and Type A). The largest proportion (42.7%) belonged to Type H, which is the same as the elderly men's case.

응력집중을 고려한 십자형 필렛 용접재의 피로강도 평가 (Fatigue Strength Assessment of the Cruciform Fillet Welded Joint Considering Stress Concentration at Weld Toe)

  • 김대진;석창성;구재민;박재실;서정원;구병춘
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.222-227
    • /
    • 2004
  • Under cyclic loading, the fatigue failures of welded joints occur at weld toes which induce stress concentration by weld shape. So we need to obtain the peak stress and the S-N curve to assess the fatigue strength of welded joints. However the measurement of peak stress is of high uncertainty and low reproducibility, so we use nominal stress instead in fatigue tests of welded joints. In this study, fatigue tests to obtain S-N curves and FE analyses to obtain stress concentration factors were conducted for the two types of cruciform fillet welded joints, that is, load-carrying and non load-carrying types. Then we changed the obtained S-N curves to that based on peak stress using the hot-spot stress concept. From the analyses of the S-N curves obtained, we have concluded that there is a need to develop a new method to evaluate the fatigue life.

  • PDF

여성의 구두 구매 및 착용에 관한 연구 (A Study on Purchase and Use of Women's Dress Shoes)

  • 천종숙;최선희
    • 한국의류학회지
    • /
    • 제24권2호
    • /
    • pp.185-191
    • /
    • 2000
  • This survey was carried out to clarify the consumers' behavior related the purchase and use of women's dress shoes. The subjects participated in this study were 386 Korean women. Their age were ranged from 18 to 86 years. The results of this study were as following; 1. The most popular women's dress shoe sizes were 235 and 240. 2. 82.6% of subjects had experienced uncomfortable fit when they wore dress shoes. 3. The subjects aged over 30 years preferred low heel shoes. They valued wearing comfort above fashion trend in shoe design consideration. 4. The subjects aged under 30 years gave more emphasis on fashion trend than comfort and fit when they purchase dress shoes. 5. Consumer's experience of unfit with dress shoes was different with age. The younger subjects complained improper bottom sole shape. The older subjects had experience of unfit with outshell design and material. The subjects aged over 60 years thought that their dress shoe design was too narrow at the toe and lack for flexiblity of shoe material.

  • PDF

흉부촬영용 HR-C 필름의 임상평가 (Clinical Evaluation of Wide-latitude HR-C Film for Chest Radiography)

  • 김영성;황남선;여영복;이인자;허준
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제13권1호
    • /
    • pp.19-24
    • /
    • 1990
  • In appilcation of wide latitude HR-C film to chest x-ray examination, former x-ray diagnosis area is larger and diagnostic information has great deal of promotion. HR-C film is compare to former x-ray film is larger latitude and density level is small, reading is very easily. Especially, high estimate that is in characteristic curve linearity of toe part is good, contrast of low density made good shape and not good describe to overlap is diagnostic information increase mediastinum portion etc.

  • PDF

숙녀화 착용시 발의 형태요인과 장해부위와의 상관 (Correlation Between Factors Related to the Foot Shape and the Foot Abrasion in Wearing Ladies' Shoes)

  • 김순분
    • 복식
    • /
    • 제52권2호
    • /
    • pp.71-80
    • /
    • 2002
  • The purpose of this study was to examine the correlation between the shape of the foot and foot abrasion. and to provide preliminary data for shoe manufacturing by comparing the length of a woman's feet and the shoe size. The Martin calibrator and measuring tapes were utilized to measure the shapes of 163 female college students' feet. Indirect measurements were also obtained by line drawing of the feet for additional analysis. Brief questionnaires about what type of shoes are worn were given to the subjects of the study. Data analysis was presented by frequency, percentage, and standard deviations. Factor analysis and correlation co-efficiency of data was conducted on the significance level of p〈.05. The results of the study are as follows (1) The average number of days per week in which the subjects wear ladies' shoes per week were 4.5. Little over half of the subjects (53.87% ) answered that they wear heeled shoes for more than 8 hours per day. The most preferred height of a ladies'shoe heel was between 2 cm and 4 cm, as replied by 41.0% of the subjects. (2) The foot area where abrasion occurs most often was around the heel (51.2%) and the middle part of the sole (50.9%) (3) Factors correlated to the heel abrasion included the circumference and the breadth of the foot. The abrasion on the side of the first toe of mid-sized feet was most affected by the angle of the first the and inner foot line. The height of the foot heel was a significant factor for the abrasion near the anklebone. In conclusion, the abrasion resulted from the inappropriate fitting of the shoe and the foot. Also, the circumference and the width factors were more influential rather than the foot length. Therefore, more database on this should be systemized and available to the footwear manufacturers and the customers for more practical use of shoe size and public education.

Foot Type Classification of Korean Male Farmers for Ergonomic Work Shoes Design

  • Kim, Dohee;Hwang, Kyoung Suk;Lee, Kyung Suk
    • 대한인간공학회지
    • /
    • 제31권6호
    • /
    • pp.773-783
    • /
    • 2012
  • Objective: The aim of this study is to identify foot shapes of Korean male farmers by classifying their foot types using 3D scan data and analyzing the characteristics of each type. Background: The increasing demands for anthropometric information for the design of machinery and personal protective equipment to prevent occupational injuries has necessitated an understanding of the anthropometric differences to be found among occupations. Static stooped posture and squatting posture are so common in Korean farmers that anthropometric deformation in foot especially seems to occur easily. Method: 366 Korean male farmers volunteered for this study from 16 different farming villages nationwide from 2009 to 2011. Subjects were categorized into 4 age groups from 40s to 70s. Their right feet were measured by using 3D foot scanner, the anthropometric dimensions were composed of 40 items. Results: The 8 major factors affecting the foot shapes were extracted. From these factors the foot shape of Korean male farmers was classified into 3 Foot types. Foot type 1 showed severe deformation in toe 1, type 2 had a narrow shape and type 3 had a wider width for its length. Conclusion: There were some differences in foot shape and types between farmers and the public. The most characteristic foot type in Korean male farmers was type 3. Application: The results of identifying foot shapes of Korean male farmers might provide the useful information for designing ergonomic farm work shoes.