• 한국환경농학회지
• /
• 제22권4호
• /
• pp.284-289
• /
• 2003

Mesoporous titanium oxo-phosphate(Ti-MCM)은 기존의 유기성 오염물질의 광분해제로 널리 이용되고 있는 $TiO_2$에 비해 표면적이 매우 넓은 장점이 있다. 그러므로 본 연구에서는 Ti-MCM에 의한 chlorothalonil의 흡착 및 광분해 특성을 $TiO_2$와 비교하였다. 합성된 Ti-MCM은 hexagonal 형태로 d-spacing이 4.1 nm이었다. 암조건에서 $TiO_2$에 의한 chlorothalonil의 흡착은 거의 일어나지 않았으나, Ti-MCM에 의한 흡착은 반응 1시간까지 25%로 급격히 증가하여 흡착평형에 도달하였다. UV조사 하에서 반응 9시간 후의 $TiO_2$와 Ti-MCM에 의한 chlorothalonil의 제거율은 각각 88%와 100%로 나타났다. 그러나 정치상태에서의 광분해 속도는 chlorothalonil과 Ti-MCM사이의 낮은 접촉에 의한 반응성의 감소로 느린 경향을 나타내었다. 또한 Ti-MCM에 의한 chlorothalonil의 분해효율은 용액의 초기 농도가 낮을수록, pH 7까지 반응용액의 pH가 높을수록 증가하였다.

• Macromolecular Research
• /
• 제17권3호
• /
• pp.174-180
• /
• 2009

Chemical modification of titanium/titanium oxide (Ti/$TiO_2$) substrates has recently gained a great deal of attention because of the applications of Ti/$TiO_2$-based materials to biomedical areas. The reported modification methods generally involve passive coating of Ti/$TiO_2$ substrates with protein-resistant materials, and poly(ethylene glycol) (PEG) has proven advantageous for bestowing a nonbiofouling property on the surface of Ti/$TiO_2$. However, the wider applications of Ti/$TiO_2$ based materials to biomedical areas will require the introduction of biologically active moieties onto Ti/$TiO_2$, in addition to nonbiofouling property. In this work, we therefore utilized surface-initiated polymerization to coat the Ti/$TiO_2$ substrates with polymers presenting the nonbiofouling PEG moiety and subsequently conjugated biologically active compounds to the PEG-presenting, polymeric films. Specifically, a Ti/$TiO_2$ surface was chemically modified to present an initiator for atom transfer radical polymerization, and poly(ethylene glycol) methacrylate (pEGMA) was polymerized from the surface. After activation of hydroxyl groups of poly(pEGMA) (pPEGMA) with N,N'-disuccinimidyl carbonate, biotin, a model compound, was conjugated to the pPEGMA films. The reactions were confirmed by infrared spectroscopy, X-ray photoelectron spectroscopy, contact angle goniometry, and ellipsometry. The biospecific binding of target proteins was also utilized to generate micropatterns of proteins on the Ti/$TiO_2$ surface.

• 연구논문집
• /
• 통권31호
• /
• pp.113-125
• /
• 2001

Silicon addition in titanium alloys generally results in solid solution hardening by silicon itself and precipitation hardening by titanium silicides. The morphology and distribution of the titanium silicides depend upon the alloy chemistry or the heat treatment condition, and play an important role in improving the mechanical properties of the alloys. In this study, the morphology and crystallographic characteristics of the titanium silicides in the Ti-Fe-Si alloy system were studied. Three types of silicides were found in the alloys; (1) interconnected chain-like silicides at grain boundary, (2) coarse silicides over im, (3) fine silicides smaller than 0.2m. Ti3Si was dominant in cast + HIP condition while Ti5Si3 was dominant in as-cast state. It is recognized that $Ti_5Si_3$$\rightarrow$$Ti_3Si$ transition occurred by the peritectoid reaction and it may be promoted by the pressure during HIP. However, in the case of the fine silicides, $Ti_3Si$ and $Ti_5Si_3$ were found simultaneously even after HIP. Such a fine silicide was found to have a crystallographic orientation relationship with matrix.

• 한국주조공학회지
• /
• 제23권3호
• /
• pp.137-146
• /
• 2003

The main purpose of this study is to investigate the effects of process parameter on alpha-case formation of Ti and TiAl castings. The previous studies showed that the molten titanium is excessively reactive to the refractory oxide mold, resulting in alpha-caes of the titanium castings regardless of composition of titanium alloys. However, the behavior of the alpha-case formation of TiAl alloy is not consistent with conventional titanium alloy. In order to investigate the alpha-case formation of Ti and TiAl castings with process parameter, especially the associated factors of investment mold such as mold material, binder and mold preheating temperature. An attempt has been made to characterize the alpha-case of titanium casting by using optical microscope, EDS, XRD, EMPA and hardness profiles. The formation of the alpha-case on the surface of pure titanium during investment casting was rather by that of solid solution with metallic element from mold material. The required mold strength was obtained with $CaZrO_3$ because of the possibility of using water soluble binder. However, the separation phenomenon between facing and back-up mold materials should be considered. The interfacial reaction of TiAl alloy showed different behavior from that of pure titanium and $Al_2O_3$ was best mold materials. The effect of binder as well as mold material on the formation of alpha-case was significant.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1030-1031
• /
• 2006

Titanium alloys and Titanium alloy-based particulate composites were synthesized using the blended elemental P/M route. First, processing conditions such as the fabrication of master alloy powder were investigated. Ti-6Al-4V, Ti-5Al-2.5Fe, Ti-6Al-2Sn-4Zr-2Mo, IMI685, IMI829, Timetal 1100 and Timetal 62S, and Ti-6Al-2Sn-4Zr-2Mo/ 10%TiB and Timetal 62S/10%TiB were then synthesized using the optimal processing conditions obtained. The microstructures and mechanical properties such as tensile strength and high cycle fatigue strength were evaluated.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.969-970
• /
• 2006

In present work, manufacturing technologies of titanium hydride powder were studied for recycling of titanium tuning chip and for this, attrition ball milling was carried out under $H_2$ pressure of 0.5 MPa. Ti chips were completely transformed into $TiH_2$ within several hundred seconds. Dehydrogenation process $TiH_2$ powders is consist of two reactions: one is reaction of $TiH_2$ to $TiH_x$ and the other decomposition of $TiH_x$ to Ti and $H_2$. The former reaction shows relatively low activation energy and it is suggested that the reaction is caused by introduction of defects due to milling.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2343-2347
• /
• 2015

This paper reports the effect of Titanium dioxide (TiO₂) nanoparticles on a TiO₂ sol-gel Schottky diode. TiO₂ nanoparticles were blended with TiO₂ sol-gel to fabricate the Schottky diode. TiO₂ nanoparticles showed strong anatase and rutile X-ray diffraction peaks. However, the mixture of TiO₂ sol-gel and TiO₂ nanoparticles exhibited no anatase and rutile peaks. The forward current of the Schottky diode drastically increased as the concentration of TiO₂ nanoparticles increased up to 10 wt. % and decreased after that. The possible conduction mechanism is more likely space charge limited conduction.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.690-696
• /
• 2001

저가형 $TiO_2$ 광촉매의 개발과 광촉매의 활용범위를 확대하고자, 석탄회를 지지체로 이용하여 $TiO_2$ 광촉매를 제조하였다. 석탄회 표면에 $TiO_2$ 입자의 피복은 침전법에 의해서 수행되었다. $TiO_2$의 공급원으로는$ TiCl_4$수용액과 침전제로는 $NH_4$$HCO_3$가 사용되었다. 이들의 중화반응에 의해 석탄회 표면에 생성되는 Ti(OH)4$_4$는 $300~700^{\circ}C$의 열처리 과정에서 산화되었다. 여기서 생성된 $TiO_2$의 결정구조는 anatase형을 나타내었다. 피복 $TiO_2$의 결정립 크기는 열처리 온도의 상승에 따라 증가하였으나, NO가스의 제거능은 감소하는 경향을 보였다. $TiO_2$피복 석탄회를 $300~400^{\circ}C$의 온도 범위에서 2시간 동안 열처리할 경우, $TiO_2$의 결정립 크기는 약 9nm이었고, 질소산화물 제거율은 85~92%이었다. 또한, $TiO_2$피복 석탄회의 백색도는 $TiO_2$의 피복량이 증가할수록 열처리 온도가 증가할수록 상승하는 경향을 나타내었다.

• 공업화학
• /
• 제4권1호
• /
• pp.64-74
• /
• 1993

국내 부존 함티탄자철광으로부터 염화티타늄($TiCl_4$)을 제조키 위해 함티탄자철광의 arc-smelting으로부터 얻어지는 titanium slag의 유동층 염소화 반응을 조사하였다. Titanium slag의 유동층 염소화반응에 적절한 반응조건은 반응 온도 $950^{\circ}C$, 반응시간 90분, 염소가스의 유속 3.0cm/sec, titanium slag에 대한 petroleum coke의 무게비 0.18, 그리고 titanium slag 및 petroleum coke의 입자의 평균직경은 각각 $44.6{\mu}m$, $67.9{\mu}m$였다. 위 조건하에서 titanium slug 중의 97.07%의 티타늄이 염소화 되었으며 제조된 염화티타늄($TiCl_4$)의 순도는 96.2%였다.