• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.7-12
• /
• 2018

In today's rapidly growing contemporary society, there is a tendency for demand to automate production processes by utilizing the vision system. In general, image recognition is mainly concerned with embossed characters such as license plates, and research on recognition of intaglio characters is very limited. Especially, intaglio characters, which are marked on rubber related products such as tire surfaces, have difficulty in recognizing characters or numbers through image because the difference in brightness with surrounding is not so large. In this paper, we propose a system to improve the recognition rate of characters marked on intaglio rubber products such as tire surfaces. Also, it can be applied flexibly according to the lighting environment. Through the proposed system, production and inventory management and defect detection can be processed quickly by applying to the production process of tire and rubber products.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.4
• /
• pp.5-13
• /
• 1992

The vibration of a vehicle, which is caused by and transmitted from the engine, has significant effect on the ride comfort and the dynamic characteristics of the engine mount system has direct influence on the vibration and noise of the vehicle. This paper examines the body shake caused by the engine excitation force on engine key-off of a jeep by experiment and computer simulation using a general purpose mechanical system program, DADS. The computer simulation model consists of the engine, body including frame, and front and rear axles and each axle has right and left tires. The force element between body and suspension is modeled as a combination of suspension spring and damper, and the unsprung mass has roll and pitch motion. The body shake obtained from experiment was compared with the result of computer simulation. Parametric study of the body shake on engine key-off is performed with changing the stiffness of engine mount rubber, the engine mount installation angle and position of engine mounts by using the verified computer simulation model.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.11-16
• /
• 2002

Analysis and separation of constituent materials of old car have been performed by using the industrial shredding line. For this aim, three old cars made by domestic automobile manufacturers, Sonata II, Sephia and Prince were chosen and delivered in pressed form without engine, tires and doors, etc. Shredding line was substantially composed of pre- and main-shredder. cyclone, magnetic separation, eddy current separation and man-power separation. From the separation of shredder products, iron scrap was observed to be the major material of old car accounting for 60.1 ％ of total weight and non-ferrous metals involving Al, Cu and Zn, etc. were about 2％. Light fluff, about 90％ of total fluff product, was comprised with plastic, fiber and sponge, etc. and the fraction of 5 cm undersize in light fluff was 70.5%. In case of heavy fluff, however. rubber and plastic were found to be the major constituent materials of it. Among the constituent materials of fluff, plastic showed the highest calorific value, more than 10,000 cal/gr and leather and rubber showed relatively high chlorine content, 10.3 and 2.55 wt%, respectively.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.39-45
• /
• 1998

We smelted thc pellets made by mixing the distilled carbon from wlISte Lires, LD converter dust and slag with reduction process in the revcrberatory furnace. Thc obtained results are as follows 1) The removal mte of zinc appears above 97% after T reducing the pellets at $1300^{\circ}C$ for Ihr and the zinc content in the residue are 0.1~D.2%. 2) Under the mixing condition of 500 g LD dust. 150-200 g LD slag and 30-50 g distilled carbon of waste lires the removal raho of zinc shows above 95%, while t the 50-60% Fe remains in the residue. 3) After smelting at $1350^{\circ}C$ for 3hrs, the recovery ratio of pig iron reduced from lhe p pellets containing 15-20% LD slag and 4.1-7.2% distilled carbon of waste tires appears in the range of 89.3-92%. 4) Tbe c chemical composition of the recovered pig iron is 1.7%C, O.05%P, 0.05%S and balance Fe. 5) Tbe recovered dust from the d dust collcctor alter finishing the reduction rcaction appears as a crude zinc oxide conLaining 60% zinc.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.436-441
• /
• 2011

A TPMS is a wireless communication system designed to monitor its condition inside the pneumatic tires on various types of vehicles. These systems report the tire pressure information to the driver of the vehicle. While wireless communications is used to transmit the measurement data from TPMS sensors to a central processing unit in the vehicle, it suffers from the various interferences such as sensors of each tire or outside electrical equipments. Based on the conventional beamformer, a switching beamforming technique is proposed to minimize the interference and efficiently receive valid data. Moreover, in order to minimize the interference and reduce power consumption for communication, a system with unique Gold Code is presented for each tire. The performance of interference suppression is illustrated by computer simulations.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.481-488
• /
• 2000

This study was initiated in order to find alternative fuel substituting for light oil the most common fuel for heating greenhouse. The tire oil used in this research was produced by pyrolysis process, one of the final products besides steel string and carbon black in which waste tires as a form of chopped pieces broken by shredding machine are heated up to 200~30$0^{\circ}C$ with maximum restraining of oxygen supply. In order to justify light oil equivalent qualities in tire oil combustion characteristics were defined in the way of comparing kinetic viscosities in the wide range of temperature flame sizes and exhaust gas components in the various combustion conditions. We found that kinetic viscosity of tire oil was lower than light oil by 1 to 2 cSt in the temperature range showing better flowing mobility in the fuel line of the burner and no significant difference in flame size between the two oils in the all combustion treatments. However much more NO and SO$_2$ were detected from the exhaust gases of tire oil than light oil combustions. In fact tire oil contains more nitrogen and total sulfur, by 25 times and 40 times respectively than light oil according to the composition analysis. Tolerable limit for SO$_2$discharge amount defined by the national air pollution standards is under 540ppm so tire oil combustion satisfies the requirement though. It is desirable if sulfur and nitrogen filtering process shall be added in the tire oil production line. Except the exhaust gas components all greenhouse heating qualities of tire oil including hot air temperature are very identical to those of light oil.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.379-385
• /
• 2013

The tires, suspension type, and steering system can all cause pulling during braking. Among these, a drag link steering system and leaf-type suspension system are significant causes of vehicle pulling. In this study, the pulling problem is analyzed using the vehicle analysis program "ADAMS/CAR." The drag link and leaf spring behavior is analyzed to find the key reason for pulling. After this, the optimization program "Visual DOC" is used with "ADAMS/CAR" to find a steering link connection point to reduce pulling. After conducting this simulation, K&C (kinematic & compliance) test simulation with a modified connection point is conducted to determine whether the vehicle performance improves. Through a full braking simulation, it is verified that the pulling distance is reduced at braking.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.334-339
• /
• 2015

Polyketone fiber, a newly developed high strength fiber, has a tenacity and modulus similar to the paramid fiber, and can be used for reinforcing mechanical rubber goods(MRG), such as tires, hoses, and technical textiles. In addition, aliphatic polyketone, which has excellent strength, modulus, chemical stability and reasonable price, is being developed only in South Korea. It will be expected for replacement of super fiber such as aramids and increasing the technical textile market share. This paper surveys the mechanical properties of polyketone fiber yarn for technical textiles. For this purpose, two kinds of yarns are prepared, mechanical properties of coated and uncoated polyketone yarns such as tensile strength, elongation and modulus were examined before and after weather resistance test(temperature $60^{\circ}C$, humidity 60%, amount of power $0.67w/m^2$). The differences of mechanical properties between uncoated and coated yarns for high functional technical textiles and composite materials are estimated through this study.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.1
• /
• pp.65-70
• /
• 2005

This study was conducted to investigate the effect of combine crawler attaching slurry spreader on soil and growth of rye. The performance test at actual field was conducted to test for possibility of practical use. Field test of the slurry spreader was operated in upland and paddy field. Experiments was conducted to compare the effects of the soil damage and crop productivity incorporating Pig slurry by two different types of slurry spreader. In this experiment a slurry spreader using crawler of combine have been designed and developed to enhance the operation in small field and reduce e damage of soil structure. but it was not suitable for transference in long distance. Conventional tractor mounted vacuum is not suitable for $71.6\%$ water condition in the small areas of paddy land. But the slurry spreader using crawler could be controlled the working point and moving by crawler in paddy land of small area. The wheels depths of soil in the supplementary application in the rye field was 4.9 m in tractor mounted spreader. but the wheels depth of crawler attaching spreader was 1.6cm. The dry matter yield of rye was reduced by $12\%$ in supplementary application of slurry due to mechanical damage from passage of the tires. This is particularly noticeable at high soil moisture condition in paddy land. It was concluded that the slurry spreader developed in this study could be successfully used for basal and supplementary application of slurry in rye paddy field.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.4
• /
• pp.37-46
• /
• 2005

Waste tires can be used not only for reinforcement material due to its high capacity against tensile force but also effective for massive treatment. In order to use waste tire as reinforcing material Tread mat using tire treads only was made. Plate load tests on the embankment of decomposed granite soil reinforced with Tread mat and geogrids were conducted for comparison with the test results, respectively. And numerical analyses were performed to see the stress and stain around the reinforced material. Tread mat showed bearing capacity increase and the amount was bigger than that of commercial geogrids. Finite element analysis showed decrease of stress beneath the reinforced material and stress distribution. Finally Tread mat was proposed to use for soil reinforcement as a means of massive treatment of discarded tire.