• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.308-311
• /
• 2005

In this paper, we studied about the effects of the rotating cantilever pipe conveying fluid with a moving mass. The influences of a rotating angular velocity, the velocity of fluid flow and moving mass on the dynamic behavior of a cantilever pipe have been studied by the numerical method. The equation of motion is derived by using the Lagrange's equation. The cantilever pipe is modeled by the Euler-Bemoulli hew theory. When the velocity of a moving mass is constant, the lateral tip-displacement of a cantilever pipe is proportional to the moving mass and the angular velocity. In the steady state, the lateral tip-displacement of a cantilever pipe is more sensitive to the velocity of fluid than the angular velocity, and the axial deflection of a cantilever, pipe is more sensitive to the effect of a angular velocity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.315.2-315
• /
• 2002

The vibrational system of this study consists of a cantilever pipe conveying fluid, the moving mass upon it and an attached tip mass. The equation of motion is derived by using Lagrange equation. The influences of the velocity of moving mass and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a cantilever pipe by numerical method. While the moving mass moves upon the cantilever pipe, the velocity of fluid flow increase, the tip displacement of cantilever pipe conveying fluid is decreased. (omitted)

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.381-388
• /
• 2018

Dynamic behaviour of beam carrying masses has attracted attention of many researchers and engineers. Many studies on the analytical solution of beam with concentric tip mass have been published. However, there are limited works on vibration analysis of beam with an eccentric three dimensional object. In this case, bending and torsional deformations of beam are coupled due to the boundary conditions. Analytical solution of equations of motion of the system is complicated and lengthy. Therefore, in this study, Differential Transform Method (DTM) is applied to solve the relevant equations. First, the Timoshenko beam with 3D tip attachment whose centre of gravity is not coincident with beam end point is considered. The beam is assumed to undergo bending in two orthogonal planes and torsional deformation about beam axis. Using Hamilton's principle the equations of motion of the system along with the possible boundary conditions are derived. Later DTM is applied to obtain natural frequencies and mode shapes of the system. According to the relevant literature DTM has not been applied to such a system so far. Moreover, the problem is modelled by Ansys, the well-known finite element method, and impact test is applied to extract experimental modal data. Comparing DTM results with finite element and experimental results it is concluded that the proposed approach produces accurate results.

• 한국음향학회지
• /
• 제42권3호
• /
• pp.233-242
• /
• 2023

본 논문에서는 선박 수중방사소음 저감을 위하여 질량 분사를 통하여 선박의 저속 운항 조건에서 발생하는 날개 끝 보텍스 캐비테이션 제어에 대한 실험적 연구를 수행하였다. 3차원 수중익 모형에 대해 질량 분사 위치와 분사량을 조절 할 수 있는 질량 분사 시스템을 제작하였으며, 이를 캐비테이션 터널 내에 설치하고 3차원 수중익으로부터 생성되는 캐비테이션의 강도에 따른 시험을 캐비테이션 제어 실험을 수행하였다. 질량 분사 위치 및 분사량에 따른 캐비테이션의 관찰과 소음 특성을 분석하기 위하여 고속 카메라와 음향 센서를 이용하여 계측하였고, 그 결과 질량 분사에 따라 특정 조건에서 날개 끝 보텍스가 억제되고 특정 주파수 대역의 소음이 저감 되는 것을 확인하였다. 날개 끝 보텍스 제어와 소음 저감 성능에 우수한 분사구 위치가 있음을 확인하였고, 일정 수준 이상의 분사량을 가질때 큰 저감 효과가 있음을 확인하였다. 질량 분사를 이용하여 날개 끝 보텍스의 강도가 약할 때 특정 조건에서 제어가 가능하다는 것을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.822-829
• /
• 2015

A transfer matrix method has been developed to determine the more accurate natural frequencies for the bending vibration of Bernoulli-Euler beam with linearly reduced width and a concentrated tip mass. The proposed method can be computed an infinite number of the natural frequencies using a single element. Using the differential equation, shear force, and bending moment in which can be deduced by the diverse variational principles, a transfer matrix is formulated. The roots of the differential equation are computed by the Frobenius method. The effect of the concentrated mass for the natural frequencies of width-tapered beams is examined through a parametric study, and to show the accuracy of the proposed method, the computed results compared with those obtained from commercial finite element analysis program(ANSYS).

• 한국분무공학회지
• /
• 제23권1호
• /
• pp.30-35
• /
• 2018

The objective of this study is to predict numerically the effect of intake humidification on the injected diesel fuel spray characteristics in a compression ignition engine. In this work, Wave model and Ducowicz model were applied as the break-up model and evaporation model, respectively. The amount of water vapor for the humidification was changed from 0% to 30% of injected fuel mass. The number of applied meshes was generated from 49,000 to 110,000. At the same time, the results of this work were compared in terms of spray tip penetration, SMD and equivalence ratio distributions. It was found that the cylinder temperature and cylinder pressure were decreased with increasing water vapor mass by vaporization latent heat and specific heat, however, the difference was very small. So, the spray tip penetration was not different by water vapor mass. Also, higher equivalence ratio distributions were observed with increasing water vapor mass by the improvement of fuel atomization.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.145-148
• /
• 2008

현재 항우연에서 개발 중인 우주발사체 터보펌프에 사용되는 터빈은 단단 충동터빈을 적용하고 있다. 우주발사체의 안정성을 위해 팁 간극을 비교적 많이 허용하고 있는데, 효율적인 면에서는 반동터빈 보다 다소 뒤지지만, 높은 출력비를 가지는 충동터빈이 팁 간극이 커질 때 어떤 효율경향을 나타내는지 알아보는 일은 의미 있는 일이다. 실험은 아음속 조건에서 실험하였고, 팁 간극을 각각 코드기준 1%$\sim$20%일 경우 충동과 반동 각각의 경우에 대하여 하류 전압손실을 측정하였다. 측정결과 팁 간극이 10%보다 더 커지면, 충동터빈이 오히려 전압손실량이 반동터빈보다 더 작아진다. 이것은 팁 간극이 비교적 큰 조건에서 충동터빈이 반동터빈보다 효율이나 출력비 면에서 더 나은 성능을 나타냄을 의미한다.

• 설비공학논문집
• /
• 제13권2호
• /
• pp.134-143
• /
• 2001

This paper presents the characteristics of flank and tip seal leakage in a scroll compressor for air-conditioners with R-22 under actual operating conditions. It is well known that the leakage has significant effect on the performance of the scroll compressor. Experiments were performed by using indirect method for measuring mass flow rate passing through flank and tip seal under actual operating conditions, In addition, an analytical model for tip seal leakage was developed to investigate tangential and radial leakage observed at grooves and contact points of tip seals. For low oil concentration, theoretical results were compared with experimental data to verify the analytical model. As a result, leakages through flank and tip seal parts were evaluated as afunction of pressure ratio, orbiting angle, discharge pressure, tip clearance, and leakage point. It was also found that the tip seal leakage was considerable even though the tip seal provided adequate sealing effect.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.493-500
• /
• 2006

Investigation on the fuel adhering on a wall was carried out experimentally to clarify the characteristics of impinging diesel sprays. Diesel sprays were injected into a high-pressure chamber of cold state and impinged to a wall having various impingement distances and ambient pressures. Photographs of both the fuel film and the post-impingement spray were taken through a transparent wall. Adhered fuel mass on a wall was measured by means of dividing into two types of fuel state: the fuel film itself; and sparsely adhered fuel droplets. Adhering fuel ratio was predicted and further the distribution of fuel mass for impinging diesel spray was analyzed as a function of time. As result, with an increase of the ambient pressure, both the maximum fuel film diameter and the adhered fuel ratio decreased. Based on some assumptions, the adhering fuel mass increased rapidly until the fuel film diameter approached the maximum value, and then increased comparatively gradually.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.313-318
• /
• 1996

This paper deals with the dynamic behavior of elastic columns under the action of subtangential forces. The above subtangential force can be-realized by the combination force between the dead load of thetip mass and the pure follower thrust. The tip mass is assumed to be a rigid body not a mass point as it has been assumed so for. The equations of motion are formulated based on extended Hamilton's principle and the finite element method. It is shown that nonconservativeness of the applied force has greatly effect on the instability type. It is found that the critical subtangential force can also be changed by consideration of the tip mass parameters taking into account of its magnitude, rotary inertia and size. The influence of the self-weight of the column on the change of the critical force is also investigated.