• ETRI Journal
• /
• v.32 no.4
• /
• pp.493-502
• /
• 2010

The operation time of an encoder is one of the critical implementation issues for satisfying the timing requirements of Long Term Evolution (LTE) systems because the encoder is based on binary operations. In this paper, we propose a design and implementation of a latency efficient encoder for LTE systems. By virtue of 8-bit parallel processing of the cyclic redundancy checking attachment, code block (CB) segmentation, and a parallel processor, we are able to construct engines for turbo codings and rate matchings of each CB in a parallel fashion. Experimental results illustrate that although the total area and clock period of the proposed scheme are 19% and 6% larger than those of a conventional method based on a serial scheme, respectively, our parallel structure decreases the latency by about 32% to 65% compared with a serial structure. In particular, our approach is more latency efficient when the encoder processes a number of CBs. In addition, we apply the proposed scheme to a real system based on LTE, so that the timing requirement for ACK/NACK transmission is met by employing the encoder based on the parallel structure.

• Journal of information and communication convergence engineering
• /
• v.22 no.2
• /
• pp.89-97
• /
• 2024

This research conducted a comparative analysis of two communication systems. The first system utilizes a conventional series configuration consisting of a symbol-rate least mean square (LMS) equalizer followed by a timing recovery loop. The second system introduces an innovative approach that integrates a symbol-rate LMS equalizer and a timing recovery component within a single loop, allowing mutual feedback between the two blocks. In this integrated system, the equalizer also provides timing error information, thereby eliminating the requirement for a separate threshold error detector. This study examines the performance curves of both system configurations. The simulation results revealed that the integrated system may offer improved stability in terms of multiple transmission challenges, including phase and frequency offsets and intersymbol interference. Further analysis and discussion highlight the significant insights and implications of the proposed architecture. Overall, the present findings provide an alternative perspective on the joint implementation of equalization and timing recovery in communication systems.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.89-96
• /
• 2015

Based on multi-body dynamic software RecurDyn, this paper proposes a modified form of timing silent chain system combing with the existing problem that vibration and chain tension is too large, which is applied for complicated conditions in a V-type engine, such as high speed, variable loads. The analysis of chain drive meshing characteristics is completed. Using the multi-body dynamic soft-ware RecurDyn, the dynamics characteristics of the improved system is studied, including chain tension, transmission error, chain fluctuations, equivalent spring force in different operating conditions. The study results show that chain tension, transmission error, chain fluctuation and equivalent spring force are within the scope of permission, all of them can meet the design requirement. There-fore, the design of this system is reasonable and practicable. The research results will provide a basis for assessing timing silent chain system in a V-type engine and a theoretical reference for designing and optimizing the timing silent chain system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.1
• /
• pp.1-13
• /
• 2006

Response of grain yield and milled-rice protein content to nitrogen topdress (N) timing at panicle initiation stage (PIS) is critical for quantifying real-time N requirement for target grain yield and milled-rice protein content. Two split-split-plot experiments with three replications, one in 2004 and the other in 2005, were conducted in Experimental Farm, Seoul National University, Suwon, Korea. The experiments included three N rates at tillering stage (TS), three N timing treatments at panicle initiation stage (PIS) and two rice cultivars. The N rates at TS, N timing at PIS, and rice cultivars were randomly assigned to main plot, sub plot, and sub-sub plot, respectively. Results showed that the delayed N application at PIS reduced grain yield in 2004 and increased milled-rice protein content in both years significantly at 0.05 probability level. The calculated optimum N timing at PIS from pooled data by N rates and rice cultivars in two years was at 28 days before heading (DBH). However, real-time of N timing at PIS was dependent on plant growth and N status around PIS that in turn was dependent on applied N rates at TS. The optimum N timing at PIS was at 30 DBH for no N treatments at TS while at 27 DBH for 3.6 and 7.2 kg N/10a treatments and at 27 and 29 DBH for Hwaseongbyeo and Daeanbyeo, respectively. In general, earlier applied N at PIS resulted in lower milled-rice protein content but the highest grain yield was expected to be obtained when N topdress at PIS was applied at the time when shoot N concentration started to drop below about 23 mg/g due to dilution effect after transplanting. In conclusion, the results of our experiments imply that the currently recommended N topdress time (24DBH) at PIS in Korea should be reconsidered for the higher grain yield and the better quality of rice.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.379-389
• /
• 2023

According to the Korea Urban Air Mobility (K-UAM) Concept of Operation (ConOps), the Global Navigation Satellite System (GNSS) is recommended as the primary navigation system and the performance specification will be implemented considering the standard of Performance Based Navigation (PBN). However, by taking into account the characteristics of an urban environment and the concurrent operations of multiple UAM aircraft, the current PBN standards for civil aviation seem difficult to be directly applied to an UAM aircraft. Therefore, by referring to technical documents published in the literature, this paper examines the feasibility of applying the proposed performance requirements to K-UAM, which follows the recommendation of navigation performance requirements for K-UAM. In accordance with the UAM ConOps, the UAM aircraft is anticipated to maintain low altitude during approach and landing phases. Subsequently, the navigation performance degradation could occur in the urban environment, and the primary degradation factor is identified as multipath error. For this reason, to ensure the safety and reliability of the K-UAM aircraft, it is necessary to analyze the degree of performance degradation related to the urban environment and then propose an alternative aid to enhance the navigation performance. To this end, the aim of this paper is to model the multipath effects of the GNSS in an urban environment and to carry out the simulation studies using the real GNSS datasets. Finally, the initial navigation performance requirement is proposed based on the results of the numerical simulation for the K-UAM.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.226-233
• /
• 2012

In this paper, we propose a 'linear approximation method' which is an accelerated BER (Bit Error Rate) test method for high speed interfaces, based on an analytical BER model. Both the conventional 'Q-factor estimation method' and 'linear approximation method' can predict a timing margin for $10^{-13}$ BER with an error of about 0.03UI. This linear approximation method is implemented on a hardware as an accelerated Built-In Self Test (BIST) with an internal BERT (BET Tester). While a direct measurement of a timing margin in a 3Gbps interface takes about 5.6 hours with $10^{-13}$ BER requirement and 95% confidence level, the accelerated BIST estimates a timing margin within 0.6 second without a considerable loss of accuracy. The test results show that the error between the estimated timing margin and the timing margin from an actual measurement using the internal BERT is less than 0.045UI.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.2
• /
• pp.189-197
• /
• 2024

Galileo is a European Global Navigation Satellite System (GNSS) that has offered the Galileo Open Service since 2016. Consequently, the standardization of GNSS augmentation systems, such as Satellite Based Augmentation System (SBAS), Ground Based Augmentation System (GBAS), and Aircraft Based Augmentation System (ABAS) for Galileo signals, is ongoing. In 2023, the European Union Space Programme Agency (EUSPA) released prior probabilities of a satellite fault and a constellation fault for Galileo, which are 3×10^-5 and 2×10^-4 per hour, respectively. In particular, the prior probability of a Galileo constellation fault is significantly higher than that for the GPS constellation fault, which is defined as 1×10^-8 per hour. This raised concerns about its potential impact on GBAS integrity monitoring. According to the Global Positioning System (GPS) Standard Positioning Service Performance Standard (SPS PS), a constellation fault is classified as a wide fault. A wide fault refers to a fault that affects more than two satellites due to a common cause. Such a fault can be caused by a failure in the Earth Orientation Parameter (EOP). The EOP is used when transforming the inertial axis, on which the orbit determination is based, to Earth Centered Earth Fixed (ECEF) axis, accounting for the irregularities in the rotation of the Earth. Therefore, a faulty EOP can introduce errors when computing a satellite position with respect to the ECEF axis. In GNSS, the ephemeris parameters are estimated based on the positions of satellites and are transmitted to navigation satellites. Subsequently, these ephemeris parameters are broadcasted via the navigation message to users. Therefore, a faulty EOP results in erroneous broadcast ephemeris data. In this paper, we assess the conventional ephemeris fault detection monitor currently employed in GBAS for wide faults, as current GBAS considers only single failure cases. In addition to the existing requirements defined in the standards on the Probability of Missed Detection (PMD), we derive a new PMD requirement tailored for a wide fault. The compliance of the current ephemeris monitor to the derived requirement is evaluated through a simulation. Our findings confirm that the conventional monitor meets the requirement even for wide fault scenarios.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.1-9
• /
• 2010

This paper propose a novel scheme called selective evaluation to improve convergence of ACO (ant colony optimization) for feature selection. The scheme cutdown the computational load by excluding the evaluation of unnecessary or less promising candidate solutions. The scheme is realizable in ACO due to the valuable information, pheromone trail which helps identify those solutions. With the aim of checking applicability of algorithms according to problem size, we analyze the timing requirements of three popular feature selection algorithms, greedy algorithm, genetic algorithm, and ant colony optimization. For a rigorous timing analysis, we adopt the concept of atomic operation. Experimental results showed that the ACO with selective evaluation was promising both in timing requirement and recognition performance.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.229-238
• /
• 2022

This paper addresses on the International technical trends, standards, and development status of terrestrial radionavigation system to provide more accurate and fail-safe Positioning, Navigation, and Timing (PNT) Information available in maritime navigation environment. We analyze the performance result of pilot service in enhanced Long range navigation (eLoran) testbed environment using Low Frequency (LF) signal, and describe the development status of Ranging-Mode (R-Mode) system using Medium Frequency (MF) and Very High Frequency (VHF) to meet the Harbor Entrances and Approaches (HEA) requirement of International Maritime Organization (IMO) within 10m position accuracy. Furthermore, we present an architecture for integrated service of satellite-terrestrial navigation system and future maritime applicable fields. As the core information infrastructure of future navigation for 4th industrial revolution, this paper will be contributed to determining the direction of present and future to provide fail-safe PNT service with Global Navigation Satellite System (GNSS) based on the technical enhancement of terrestrial integrated navigation system.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.1
• /
• pp.37-45
• /
• 2016

In this paper, design and implementation issues for a network-oriented RF emitter localization system with array antenna are discussed. For hardware, the problem of array mismatch and RF/IF channel mismatch are introduced and the calibration schemes for solving those problems are also provided. For software, it is explained how to overcome the drawback of conventional MUltiple Signal Identification and Classification (MUSIC) algorithm in a point of identifying the number of received signals and problems such as Data Association Problem and Ghost Node Problem in regard to multiple emitter localization are presented with some approaches for getting around those problems. Finally, for implementation, a criterion for arranging each of sensors and a requirement for alignment of array antenna' orientation are also given.