• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.45-50
• /
• 2011

Compression pressure of individual cylinder and valve timing have big influence on combustion pressure, indicated mean effective pressure (IMEP), emission, vibration, combustion noise and many other combustion parameters. Conventional method, however, to check compression pressure uniformity is done by mechanical pressure gage and valve timing is checked manually. This conventional method causes inaccuracy of cylinder pressure measurement because of different cranking speed results from battery status and temperature. Also to check valve timing, related FEAD parts should be disassembled and timing mark should be checked. This study describes and suggests new methodology to measure compression pressure by analysis of start motor current and to check valve timing by cylinder pressure with high accuracy. Results, it is found that detection of bulky as well as small leaky cylinder is possible by cranking motor current analysis and wrong valve timing can be detected by cylinder pressure analysis and cam and crank sensor signal.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.182-191
• /
• 2004

In this paper, performances of different ultra-wideband (UWB) modulation schemes in the presence of timing jitter are evaluated and compared. Static and Rayleigh fading channels are considered. For fading channels, Oat and dispersive channels are assumed. First, bit error rate (BER) performances for each case are derived for a fixed value of timing jitter. Later, a uniform distribution of jitter is assumed to evaluate the performance of the system, and the theoretical results are verified by computer simulations. Finger estimation error is treated as timing jitter and an appropriate model is generated. Furthermore, a worst case distribution that provides an upper bound on the system performance is presented and compared with other distributions. Effects of timing jitter on systems employing different pulse shapes are analyzed to show the dependency of UWB performance on pulse shape. Although our analysis assumes uniform timing jitter, our framework can be used to evaluate the BER performance for any given probability distribution function of the jitter.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.269-276
• /
• 2004

There has been considerable activity in recent years in developing timing analysis algorithms for distributed real-time control systems. However, it is difficult for control engineers to analyze the timing behavior of distributed real-time control systems because the algorithms was developed in a software engineer's position and the calculation of the algorithm is very complex. Therefore, there is a need to develop a timing analysis tool, which can handle the calculation complexity of the timing analysis algorithms in order to help control engineers easily analyze or develop the distributed real-time control systems. In this paper, an interactive timing analysis tool, called RAT (Response-time Analysis Tool), is introduced. RAT can perform the schedulability analysis for development of distributed real-time control systems. The schedulability analysis can verify whether all real-time tasks and messages in a system will be completed by their deadlines in the system design phase. Furthermore, from the viewpoint of end-to-end scheduling, RAT can perform the schedulability analysis for series of tasks and messages in a precedence relationship.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.973-974
• /
• 2011

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1344-1348
• /
• 1999

This paper proposes concurrent event propagation technique for timing analysis. The technique makes it possible to find several input vectors and sensitizable paths at the same time. The concurrent event propagation technique is based on the event driven simulation and the timing analysis technique with boolean equations. The technique propagates as many events as possible at the same time while preventing propagation of boolean terms which do not sensitize paths. Since events do not propagate through false paths, the longest path which successfully propagates events to one of the primary outputs is one of the longest sensitizable paths. The technique can speed up timing analysis by unifying path sensitization and maximum delay calculation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.505-507
• /
• 2005

In this paper, a timing analysis is performed for the CAN-based simulator system for a fuel cell hybrid electric vehicles. The CAN protocol is recently being used for conventional vehicles, however, the network-induced delay can make the in-vehicle network system unstable. This problem may be occurred in the future vehicles because more ECUs are being required than recent vehicles. In order to develop a stable network-based control system, timing analysis is required at the design process. Throughout this analysis, timing parameters that affect transmission delay are examined and an effective method of predicting a sampling time for a stable communication via CAN protocol. In order to show the validityof suggested timing analysis. some experiments are performed using DSPs with CAN module.

• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2797-2808
• /
• 1999

Timing Constraint Petri Nets(TCPN) extend petri nets by adding timing constraints, it is provide a formal method for the modeling and analysis of real-time system. A real-time schedulability analysis decide that a set of concurrent processes will always meet its deadline. In this paper, we present TCPN model for real-time system include timing constraints and propose a schedulability analysis algorithm using them. Also, When the TCPN model is unscheduleable under the imposed timing constraints, we propose a recovery technique that will be scheduleable by the system specification modifying or timing constraints relaxing in the optimized time.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.133-138
• /
• 2011

Compression pressure of individual cylinder and valve timing have big influence on combustion pressure, indicated mean effective pressure (IMEP), emission, vibration, combustion noise and many other combustion parameters. Therefore, uniformity of compression pressure and valve timing became one of most important engine design and production standard. Conventional method to evaluate compression pressure uniformity is to measure each cylinder pressure by mechanical pressure gage during cranking. This conventional method causes inaccuracy of cylinder pressure measurement because of different cranking speed results from battery status and also causes high manhour and cost. To check valve timing, related FEAD parts should be disassembled and timing mark should be checked manually. This study describes and suggests new methodology to measure compression pressure by analysis of start motor current and to check valve timing by cylinder pressure with high accuracy. With this new methodology, possibility to detect leaky cylinder and wrong valve timing was observed.

• Journal of Electrical Engineering and information Science
• /
• 제1권1호
• /
• pp.118-128
• /
• 1996

In safety critical hard real-time systems, a timing fault may yield catastrophic results. In order to eliminate the timing faults from the fast responsive real-time control systems, it is necessary to schedule a code based on high precision timing analysis. Further, the schedulability enhancement by having multiple processors is of wide spread interest. However, although an instruction level parallel processing is quite effective to improve the schedulability of such a system, none of the real-time applications employ instruction level parallel scheduling techniques because most of the real-time scheduling models have not been designed for fine-grain execution. In this paper, we present a timing constraint model specifying high precision timing constraints, and a practical approach for constructing static schedules for a VLIW execution model. The new model and analysis can guarantee timing accuracy to within a single machine clock cycle.

• Journal of Astronomy and Space Sciences
• /
• 제17권1호
• /
• pp.117-122
• /
• 2000

The KOMPSAT(Korea Multi-Purpose SATellite) has two optical imaging instruments called EOC(Electro-Optical Camera) and OSMI (Ocean Scanning Multispectral Imager). The image data of these instruments are transmitted to ground station and restored correctly after post-processing with the telemetry data transfeered from KOMPSAT spacecraft. The major timing information of the KOMPSAT is OBT (On-Board Time) which is formatted by the on-board computer of the spacecraft, based on 1Hz sync. pulse coming from the GPS receiver involved. The OBT is transmitted to ground station with the house-keeping telemetry data of the spacecraft while it is distributed to the instruments via 1553B data bus for synchronization during imaging and formatting. The timing information contained in the spacecraft telemetry data would have direct relation to the image data of the instruments, which should be well explained to get a more accurate image. This paper addresses the timing analysis of the KOMPSAT spacecraft and instruments, including the gyro data timing analysis for the correct restoration of the EOC and OSMI image data at ground station.