• 제목/요약/키워드: time-space distribution

검색결과 682건 처리시간 0.029초

조선 전·중기 주택의 ㄱ자 꺾음부에서 공간기능에 따른 공간형식의 변화 (Change of Spatial Form according to Spatial Function at ㄱ-shaped Corner Spaces of Houses in Early·Middle Joseon Dynasty)

  • 권아송;전봉희
    • 대한건축학회논문집:계획계
    • /
    • 제34권7호
    • /
    • pp.79-88
    • /
    • 2018
  • In the late Koryo Dynasty~early Joseon Dynasty, nationwide distribution of Ondol prompted the formation of ㄱ-shaped corner space. From this background, the spatial form changed according to the space function. In the case where the ondol is located in the bent portion, it would have formed a similar spatial form nationwide at the beginning of the 16th century. Until the middle of the 16th century the receptionists and the family rituals were carried out in the inner of the house, so ㄱ-shaped corner space gradually expanded. Also a special structure type using fultile rafters was used to cover the upper structure of the extended folded space. From the 17th century, ㄱ-shaped corner space was varied from wide and high to narrow and low. In addition to this, the space function of ㄱ-shaped corner is a small hall, a wooden floored room, and the kitchen. And Their spatial form also changes over time.

이동랙(移動 rack) 자동창고의 주행(走行)시간 분석 (Travel-Time Analysis for an Automated Mobile Racking System)

  • 이문규
    • 대한산업공학회지
    • /
    • 제21권2호
    • /
    • pp.195-206
    • /
    • 1995
  • Higher utilization of warehouse space can be achieved by using automated mobile racking systems. Therefore, those systems may be employed for factories or distribution centers as a good option of increasing the storage capacity. In this paper, travel-time models are developed to estimate the average performance of the system assuming randomized storage. Expected travel times are determined for both single- and dual-command cycles. Two extreme input/output-point locations are considered. Some numerical results obtained from the models are given.

  • PDF

서울시 도로교통흐름에 대한 시.공간적 분석 (Time-Space Analysis of Road Traffic Flows in Seoul)

  • 이금숙;민희화;박소현
    • 한국경제지리학회지
    • /
    • 제12권4호
    • /
    • pp.521-539
    • /
    • 2009
  • 본 연구의 목적은 지속가능한 도시교통체계 확립을 위한 방향 모색을 위한 기초 작업으로 서울에서 대기오염 등 다양한 환경문제를 야기하는 도로교통흐름의 시 공간적 특성을 분석하는 것이다. 특히 1990년대 중후반부터 진행되어오고 있는 수도권지역 신도시 개발로 인구분포에 나타나고 있는 변화와 1990년대 후반의 IMF로 경제 사회 기술적 환경이 크게 바뀌면서 산업 구조의 재편과 함께 나타나고 있는 서울시 도로교통흐름과 토지이용의 시 공간적 변화에 초점을 두고 분석하였다. 이를 위하여 1993년부터 서울시 주요지점에 설치한 118개 측정지점에서 실시간 관측한 14년간의 도로교통흐름 자료를 이용하여 서울시 교통흐름의 시간적 변화와 공간적 변화를 분석하였다. 서울시 전체의 연평균일일교통량에 대한 시계열적 분석 결과 서울시 도로교통흐름의 변화추세는 1997년과 2003년 두 시점을 변곡점으로 큰 변화를 보임을 확인하였다. 이러한 변곡점들을 전후한 시점들의 도로교통흐름을 GIS를 적용하여 공간적 구조를 분석해 보면 서울시 교통흐름은 도심의 교통량감소와 시계지점의 교통량 증가, 강남권의 교통량증가, 한강교량을 통한 강남 북 간 교통량 감소 등, 뚜렷한 공간적 변화가 관찰된다. 이러한 현상은 서울시의 토지이용패턴이 크게 변화하였으며, 그에 따라 지역 간 기능적인 연계구 조도 크게 달라졌음을 암시하는 것이므로 본 연구에서는 서울시 도로교통흐름의 공간적 구조에 나타나는 변화가 서울시의 토지이용변화와 어떻게 연관되어 있는가를 밝히기 위하여 먼저 수도권 거주인구분포에 나타나는 변화와의 관계성을 분석 하였다. 분석 결과 서울시 도로교통흐름의 공간구조에 나타나는 변화는 신도시를 비롯한 경기도 지역의 거주 인구의 증가와 서울 도심지역 인구 감소 현상과 밀접히 연관되어 있음을 확인할 수 있었다. 좀 더 구체적으로 서울시 산업구조와 분포에 나타나는 변화와 서울시 도로교통흐름의 공간적 구조에 나타나는 변화를 파악하기 위하여 구별 도로교통량 증감률과 산업별 산업체 수와 종사자수의 증감률, 거주인구증감률을 중심으로 세 개의 선형모형을 구성하고 다중회귀분석을 적용하였다.

  • PDF

3차원 영상처리를 이용한 암반 사면의 절리 측정에 관한 연구 (Measurement of Rock Slope Joint using 3D Image Processing)

  • 이승호;황영철;심석래;정태영
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.854-861
    • /
    • 2005
  • Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.

  • PDF

멀티 프로세서 시스템-온-칩(MPSoC)을 위한 버스 매트릭스 구조의 빠르고 정확한 성능 예측 기법 (Fast and Accurate Performance Estimation of Bus Matrix for Multi-Processor System-on-Chip (MPSoC))

  • 김성찬;하순회
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제35권11호
    • /
    • pp.527-539
    • /
    • 2008
  • 본 논문은 큐잉 이론을 이용한 멀티 프로세서 시스템-온-칩(MPSoC)의 버스 매트릭스 기반 통신 구조에 대한 성능 예측 기법을 제안한다. 버스 매트릭스 기반 통신 구조는 다양한 설계 인자를 가지고 있어 이에 대한 성능 최적화는 방대한 설계 공간의 탐색을 필요로 하지만, 현재 널리 사용되고 있는 시뮬레이션에 기반한 방법은 많은 시간을 요하기 때문에 점점 짧아지고 있는 시장 적기 출하(time-to-market) 제약 조건을 만족하기 어렵다. 이러한 문제를 해결하기 위하여 본 논문에서는 시뮬레이션보다 훨씬 빠르면서 정확하게 성능을 예측할 수 있는 기법을 개발하였다. 제안한 성능 분석 기법은 고성능의 버스 매트릭스를 위해 사용되는 버스 프로토콜인 multiple outstanding transaction을 고려한다. 또한 지수 분포(exponential distribution)를 이용하여 비현실적으로 메모리 시스템을 모델하였던 기존의 연구들과 달리 실제적인 메모리 시스템 모델을 위하여 일반 분포(general distribution)를 이용하였다. 제안한 성능 예측 기법의 정확도 및 효율성을 검증하기 위하여 무작위로 생성된 버스 트랜잭션들과 4-채널 DVR 예제에 적용하였을 때, 사이클 단위의 정확도를 갖는 시뮬레이션과 비교하여 $10^5$배 이상 빠르면서 평균 94% 이상의 정확도를 갖는 것으로 분석되었다.

온도에 따른 유전체내에서의 공간전하 분포와 전도전류 특성 (Characteization of Space Charge Distribution and Conduction Current in Dielectric material With Temperature)

  • 김진균;황보승;한민구
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 C
    • /
    • pp.1078-1080
    • /
    • 1995
  • The pulsed electro-acoustic method was used as a nondestructive measurement technique of spare charge distribution in dielectric materials. In our work presented here, we measured simultaneously the space charge distribution and conduction current in the low-density polyethylene samples with elevated temperatures up to $80^{\circ}C$ and electric field up to 20kV/mm. In the temperature less than $50^{\circ}C$, homocharges are mainly accumulated close to the electrodes under DC bias and after grounding. At the temperature exeeds $50^{\circ}C$, heterocharges are accumulated near the opposite electrode under DC bias. However after grounding the upper electrode, this charges immediately disappeared. The conduction current in LDPE at $20^{\circ}C$ and $30^{\circ}C$ was reduced slowly with increasing interval of applied voltage. But as temperature increased, the conduction current tended to increase slowly with the time and the degree of increase is enlarged.

  • PDF

ON THE AGE DISIRIBUTION OF OPEN CLUSTERS

  • Hong, Seung-Soo;Kim, Yong-Ha;Lee, See-Woo
    • 천문학회지
    • /
    • 제17권1호
    • /
    • pp.1-14
    • /
    • 1984
  • Analyses of an integrated form $N(\tau)={\int}_{\tau}^{\infty}n(\tau)d{\tau}$ of the distribution of cluster ages, rather than its differential form $n(\tau)$, demonstrate that the observed distribution has clusters older than about 500 million years in a significant excess over theoretical model distributions. Considerations on cluster disruption processes show that a single disruption time-scale, frequently employed by current theoretical models, is no longer an adequate parameter for describing survival probability of clusters over wide age range, because different initial conditions of these clusters produce corresponding spreads in their lifetimes. To take into account for the spread in initial conditions, we have introduced an age-dependent disruption time, and deduced its age-dependence from the present-day age distribution of clusters. Results show a distinct two-stage variation: The newly introduced disruption time stays constant at about 50 million years for clusters younger than about 100 million years, while for clusters older than that it increases monotonically with the cluster age. This leads us to conclude that clusters experience different types of disrupting causes as they get old.

  • PDF

Socially Aware Device-to-multi-device User Grouping for Popular Content Distribution

  • Liu, Jianlong;Zhou, Wen'an;Lin, Lixia
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권11호
    • /
    • pp.4372-4394
    • /
    • 2020
  • The distribution of popular videos incurs a large amount of traffic at the base stations (BS) of networks. Device-to-multi-device (D2MD) communication has emerged an efficient radio access technology for offloading BS traffic in recent years. However, traditional studies have focused on synchronous user requests whereas asynchronous user requests are more common. Hence, offloading BS traffic in case of asynchronous user requests while considering their time-varying characteristics and the quality of experience (QoE) of video request users (VRUs) is a pressing problem. This paper uses social stability (SS) and video loading duration (VLD)-tolerant property to group VRUs and seed users (SUs) to offload BS traffic. We define the average amount of data transmission (AADT) to measure the network's capacity for offloading BS traffic. Based on this, we formulate a time-varying bipartite graph matching optimization problem. We decouple the problem into two subproblems which can be solved separately in terms of time and space. Then, we propose the socially aware D2MD user selection (SA-D2MD-S) algorithm based on finite horizon optimal stopping theory, and propose the SA-D2MD user matching (SA-D2MD-M) algorithm to solve the two subproblems. The results of simulations show that our algorithms outperform prevalent algorithms.

압력분포 측정용 시스템 개발 및 응용 (Development and Application of System for Pressure Distribution Measurement)

  • 김용환;박성하
    • 한국자동차공학회논문집
    • /
    • 제11권6호
    • /
    • pp.134-140
    • /
    • 2003
  • The film sensor is used for measuring pressure distribution at planar area, especially at a small space or gap. The present paper deals with the development of film type sensors and system for pressure distribution measuring. The developed system is consist of (1)film sensor with 40/sup */40 array, (2)PCI interface card with maximum sampling rate of 100㎐, and (3)software for data processing and real-time display. The contact pressure test of wiper blade and front glass of vehicle was performed with wiper blade by 40cm. Generally spring force of wiper arm is designed at 0.7∼1kN. Test results of total force was 9.4N and 7.1N in each driver and passenger toward. The paper suggested possibility for base definition in wiper design. A windshield wiper blade experiment revealed that the system successfully measured the contact force distribution during static state, showing the usefulness of the developed system.

전기집진장치의 효율 개선을 위한 풍속 분포 및 입자농도 분포의 영향 (Influence of the Distribution of Wind Velocity and Mist Concentration for the Improvement of Efficiency with an Electrostatic Precipitator)

  • 임헌찬;이덕출
    • 한국안전학회지
    • /
    • 제13권4호
    • /
    • pp.155-161
    • /
    • 1998
  • Recently, there are widely needs of small scale electrostatic precipitator(ESP) in machine shop and other factories. Since the space of such factories is limited, the improvement of collection efficiency is predominant subject. In this study, we examine the influence of distribution of wind velocity and oil mist concentration inside the ESP in order to improve the performance of the ESP. The distribution of wind velocity and mist concentration is measured respectively in a cross-sectional plane of the ESP. The former is controlled by using a louver which is placed in front of an ionizer and the latter is controlled by lengthening the pipe of entrance of the ESP in order to have plenty of time that mist is dispersed evenly. It is shown that the uniformity of distribution of wind velocity and mist concentration inside the ESP can be getting by adopting a louver with proper shape and lengthening the pipe of entrance and is also contributed to collection efficiency considerably.

  • PDF