• 정보학연구
• /
• 제3권2호
• /
• pp.13-21
• /
• 2000

자바 네이티브 메소드는 시간 소모적인 작업의 효율적 실행, 플랫폼 종속적인 작업의 수행, 라이브러리의 재사용 등을 위해 제안되었다. 실행 속도 향상을 위해 네이티브 메소드를 사용한다면, 네이티브 메소드 구현에 자바 언어가 아닌 컴파일 방식의 다른 언어를 사용해야한다. 또한 자바 네이티브 인터페이스의 개념을 습득해야한다. 이러한 부담을 경감시키기 위해 렬 논문에서는 자바 메소드를 네이티브 메소드로 자동 변환하여 주는 자바 네이티브 메소드 생성 시스템을 제안하였다. 또한 본 시스템은 JNI의 개념을 요구하지 않기 때문에 C 언어로 네이티브 메소드를 작성하려는 프로그래머에게 편의를 제공한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.715-718
• /
• 2001

This study uses traditional alum coagulation and sedimentation process to treat CMP wastewater from cleaning after polishing. The primary goal is to successfully recycle both solid fines and water for semiconductor manufacturing. Results indicated that CMP wastewater may be successfully treated to recover clean water and fine particles by alum coagulation. The optimum operating conditions for coagulation are as fellowing: alum dosage of 10 ppm, pH at 5, rapid mixing speed at 800 rpm, 5 min rapid mixing time, and long slow mixing time. The treated water with low turbidity and an average residual aluminum ion concentration of 0.23 ppm may be considered for reuse. The settled sludge after alum coagulation contains mainly SiO$_2$particle with a minor content of aluminum (1.7 wt%) may be considered as raw materials for glass and ceramic industry.

• Journal of Information Technology Applications and Management
• /
• 제11권3호
• /
• pp.147-159
• /
• 2004

Empirical evidence on the maintainability of object-oriented systems is far from conclusive, partly due to lack of representativeness of the subjects and systems used in the study. The present research empirically examined this issue with the systems that are mission-critical. currently operational and maintained by professionals. It was found that the 00 group appeared to consume less time while maintaining more amount of software artifacts than the NOO counterpart. This economical utilization of time appeared evident regardless of software development life cycle. This was due to the usefulness of UML for impact analysis which contributed to effective comprehension and communication. Insufficient design specifications led to ambiguity and costly defects in transferring design solutions to development. Also. the encapsulation of 00 seemed to reduce mental loads at maintenance tasks and improved code reuse. However, the number of files to manage increased and thus. dependency management is required for the 00 systems.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.269-274
• /
• 2001

본 논문은 멀티미디어 서버를 위한 버퍼링 시스템 설계를 위한 연구로서 버퍼공유기법과 슬롯어드레싱(Slot Addressing)기법을 이용하여 제한된 버퍼의 이용률을 극대화함으로써 멀티미디어 서버의 성능을 향상시킬 수 있는 기법을 제안하였다. 또한, 한번 사용된 데이터블록에 대하여 재 참조 시간을 계산하고 후속 스트림이 재 사용할 수 있게 하여 멀티미디어 서버의 입출력 횟수를 줄임으로써 결과적으로 여유 대역폭을 이용하여 더 많은 사용자의 요구를 수용할 수 있는 버퍼링 시스템을 제안하였다.

• 한국CDE학회논문집
• /
• 제8권3호
• /
• pp.184-188
• /
• 2003

The harness design process consists of repetitious routines to decide the wire configuration in its interior. A slight change in one of the wire's configuration will require a total reconfiguration of the entire wire system. Therefore, the harness design is extremely time consuming and is vulnerable to human errors by an engineer. Based on both electrical and mechanical area, Wiring Harness system is in complicated area. Existing systems are, therefore, not exactly suitable for practical use. This paper presents a novel framework for ameliorating existing system's defects. In this paper, Visio and Visual Basic was interfaced to process wire bundle information and wire bundle location to alleviate problems mentioned beforehand concerning harness design; at the same time developing the automation of the entire design process based on the feature based design method, optional print, and management of documents for reuse.

• 대한산업공학회지
• /
• 제22권3호
• /
• pp.413-426
• /
• 1996

Modern society, as a result of high industrial technology, is characterized by a series of mass production, moss consumption and mass disposal. As the mass disposal is known as the major culprit of destroying ecological system of our environment, human prosperity is in turn threatened by this indiscrete activities. Under current industrial technology which pursuit maximum profit, environmental problems could not be solved. This paper proposes recycle manufacturing systems of assemble products as a measure of current non-recycle manufacturing systems. Products are also composed of a number of ports. All parts are represented by a function of time cost performance variable as reuse level. We develop on information systems which give all the information on reused and recycled parts. We try to implement this result on a real fields. We confide ourselves to the contribution to on effective solution of environmental problems and to give profit to assembly manufacturing and consumers.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.397-403
• /
• 2015

This paper presents a new SOC test compression scheme in Embedded Deterministic Test (EDT) compression environment. Compressed test data is brought over the TAM from the tester to the cores in SOC and decompressed in the cores. The proposed scheme allows cores tested at the same time to share some test channels. By sharing free variables in these channels across test cubes of different cores decompressed at the same time, high encoding efficiency is achieved. Moreover, no excess control data is required in this scheme. The ability to reuse excess free variables eliminates the need for high precision in matching the number of test channels with the number of care bits for every core. Experimental results obtained for some SOC designs illustrate effectiveness of the proposed test application scheme.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(C)
• /
• pp.540-544
• /
• 2010

모바일 환경에서 웹 브라우저 활용이 늘어나고 웹 페이지를 통한 다양한 서비스가 제공되면서 브라우저에서의 자바스크립트 성능이 중요한 요소가 되었다. 자바스크립트 엔진의 성능 개선을 위해 기존에 사용하던 인터프리터 대신에 머신 코드를 실행 시간에 생성하는 적시 컴파일러(JITC)가 도입되었다. 특히 모바일 환경에서 WebKit의 자바스크립트 엔진인 SquirrelFish Extreme(SFX)이 많이 사용되고 있다. 본 논문에서는 SFX의 성능 향상을 위하여 적시 컴파일러를 통해 생성된 머신 코드를 파일 시스템을 활용하여 파일에 저장하였다가 재사용하는 클라이언트 AOTC(ahead-of-time compilation) 방식을 제시하고 초기 실험 결과를 제시한다.

• Journal of Electrochemical Science and Technology
• /
• 제15권3호
• /
• pp.414-420
• /
• 2024

Lithium-ion batteries are widely used in many applications due to their high energy density, high efficiency, and excellent cycle ability. Once an unknown Li-ion battery is reusable, it is important to measure its lifetime and state of health. The most favorable measurement method is the cycle test, which is accurate but time- and capacity-consuming. In this study, instead of a cycle test, we present an empirical model based on the C-rate test to understand the state of health of the battery in a short time. As a result, we show that the partially accelerated charge/discharge condition of the Li-ion battery is highly effective for the degradation of battery capacity, even when half of the charge/discharge conditions are the same. This observation provides a measurable method for predicting battery reuse and future capacity degradation.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.365-370
• /
• 2010

In this study, we carried out the evaluation of EPDM(Ethylene Propylene Diene Monomer) reclaimed rubber mixing with natural rubber at various mixing ratio to reuse as rubber filler. The scorch time and moony viscosity was analyzed to evaluate the effect of cure behavior. And also, we analyzed the tensile strength, the elongation at break and cure time to evaluate the variation of cure behavior. As the results, the scorch time and optimal cure time was decreased according to the increasing of EPDM reclaimed rubber. However, the moony viscosity was increased at each mixing ratio. In case of the added EPDM reclaimed rubber was 20 phr(parts by weight per 100 parts by weight of rubber), the hardness and specific gravity was increased a little. The hardness and specific gravity was increased in rapidly under 40 phr of the added EPEM reclaimed rubber. The tensile strength and elongation at break of the compound of natural and EPDM reclaimed rubber was rapidly decreased compared with its natural rubber when the ratio of adding EPDM reclaimed rubber was over 40 phr.