• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.29-32
• /
• 1999

In this study, the time delay model were simulated using the well-known AR model. Frequency response of the time delay model can be obtained by mapping AR model to JTC model in the time domain. That is, from the few measurement data in JTC model, the channel frequency response can be obtained by the estimation of AR model parameters. From this channel frequency response, the time delay model can be obtained using Fourier transformation. To prove the validity of the suggested method, three models of JTC were shown and analyzed.

• 대한간호학회지
• /
• 제42권1호
• /
• pp.48-55
• /
• 2012

Purpose: The aim of this study was to compare statistical methods to control response bias in nursing activity surveys. Methods: Data were collected at a medical unit of a general hospital. The number of nursing activities and consumed activity time were measured using self-report questionnaires. Descriptive statistics were used to identify general characteristics of the units. Average, Z-standardization, gamma regression, finite mixture model, and stochastic frontier model were adopted to estimate true activity time controlling for response bias. Results: The nursing activity time data were highly skewed and had non-normal distributions. Among the 4 different methods, only gamma regression and stochastic frontier model controlled response bias effectively and the estimated total nursing activity time did not exceeded total work time. However, in gamma regression, estimated total nursing activity time was too small to use in real clinical settings. Thus stochastic frontier model was the most appropriate method to control response bias when compared with the other methods. Conclusion: According to these results, we recommend the use of a stochastic frontier model to estimate true nursing activity time when using self-report surveys.

• 항공우주시스템공학회지
• /
• 제9권1호
• /
• pp.12-18
• /
• 2015

The inter-conversion between different control laws in flight has a lot of risk. The SWM(Switching Mechanism) including logic and stand-by mode is designed to analyze the transient response of aircraft during inter-conversion between different control laws, based on the in-house software for non-real-time and real-time simulation. The SWM applies the fader logic of TFS(Transient Free Switch) to minimize the transient response of an aircraft during the inter-conversion, and applies the reset '0' type of the stand-by mode to prevent surface saturation due to integrator effect in the disengaged flight control law. The transition time is also important to minimize the objectionable transient response in the inter-conversion, as well as the transition control law design. This paper addresses the results of non-real-time simulation for the characteristics of transient response to different transition time to select the adequate transient time, and the real-time pilot evaluation, using SSWM(Software Switching Mechanism) and HSWM(Hardware Switching Mechanism), which is met for Level 1 flying qualities and assures safety of flight.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.449-451
• /
• 2002

We reported the algorithm of driving scheme that enhances moving picture property by improving gray-to-gray response time. Here, we report result of simulation for estimation of driving voltage to reduce response time, and experimental result. We investigated optimization of algorithm so that minimum size of LUT can support to reducing the gray-to-gray response time within 1 frame period, and with single algorithm it is possible to apply the algorithm to various kinds of LC material. So in our system there is no external EEPROM.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권2호
• /
• pp.65-71
• /
• 2001

The step response of the Manabe standard form[2] has little overshoot and show almost same waveforms regardless of the order of the characteristic polynomials. In some situations it is difficult to control the rise time and settling time simultaneously of the step response of the Manabe standard form To control its rise time and settling time efficiently, We develop the Manabe standard form: We try to find out the SRFS(Slow Rise time & Fast Setting time) form which has the slower rise time and faster settling time than those fo the Manabe standard form. We also consider the other three forms: FRSS(Fast Rise time & Slow Settling time), SRFS(Slow Rise time & Fast Settling time) and SRSS(Slow Rise time & Slow Settling time) forms. In this paper, by using the evolutionary strategy, we obtain all the coefficient of the four forms we mention above. Finally, we design a controller for a given plant so that the overall system has the performance that the rise time is faster, the settling time is faster than those of the Manabe standard form.

• 디지털콘텐츠학회 논문지
• /
• 제11권3호
• /
• pp.331-339
• /
• 2010

네트워크 보안에서의 효율성은 침입차단 성능과 시스템 performance로 대표된다. 네트워크 보안의 성능 향상을 위해서는 네트워크 인프라스트럭쳐에서의 기능적인 효율성을 우선 확보해야 한다. 그동안 네트워크 보안 효율성 제고 달성에 관한 많은 방법론들이 연구되었다. 이 같은 연구의 목적은 인프라스트럭쳐에서의 효율성 메커니즘 구현을 통해 빠른 응답시간내에 보다 우수한 침입차단을 실현하는 것이다. 이를 위해서 네트워크 보안 도메인 효율성 구조를 설계하고 구조별 효율성 측정방법을 연구함으로써 인프라스트럭쳐상에서의 보안방법론 모델을 제안하였다. 본 연구에서 제안한 방법론을 통해 체계적인 도메인 설계와 측정방법을 실시할 경우 운용인프라스트럭쳐 시스템상에서 보안 효율성 확보가 가능함이 입증되었다.

• 한국융합학회논문지
• /
• 제10권5호
• /
• pp.111-117
• /
• 2019

본 연구는 차량 사고에서 병원 전 응급의료 대응시간을 단축시키기 위한 방안을 모색한 융합연구이다. 연구방법은 한국형 교통사고 심층조사 분석 체계(Korea In-Depth Accident Study)에서 2011년 1월 1일부터 2016년 7월 30일까지 3개의 응급의료센터에 119구급대로 내원한 차량 탑승자 353명을 대상으로 날씨, 도로유형, 사고유형, 구조대 출동 여부를 활용하여 병원 전 응급의료 대응시간에 대해 요인 분석하였다. 연구결과에서 고속도로는 병원 전 응급의료 대응시간을 가장 많이 소요하였고 전체시간에 영향을 주는 요인으로 확인되었다(${\beta}=.543$, p<.001). 따라서 고속도로에서 소요되는 시간을 단축시키기 위해 고속도로 119구급대의 운영과 비상회차로의 적극적인 사용, 개별 장치를 부착한 자동 긴급구조신호 서비스의 제공을 제시하였다.

• Earthquakes and Structures
• /
• 제7권3호
• /
• pp.349-365
• /
• 2014

The dynamic response of structures under extremely short duration dynamic loads is of great concern nowadays. This paper investigates structures' response as well as the associated structural damage to explosive loads considering and ignoring the supporting soil flexibility effect. In the analysis, buildings are modeled by two alternate approaches namely, (1) building with fixed supports, (2) building with supports accounting for soil-flexibility. A lumped parameter model with spring-dashpot elements is incorporated at the base of the building model to simulate the horizontal and rotational movements of supporting soil. The soil flexibility for various shear wave velocities has been considered in the investigation. In addition, the influence of variation of lateral natural periods of building models on the obtained response and peak response time-histories besides damage indices has also been investigated under blast loads with different peak over static pressures. The Dynamic response is obtained by solving the governing equations of motion of the considered building model using a developed Matlab code based on the finite element toolbox CALFEM. The predicted results expressed in time-domain by the building model incorporating SSI effect are compared with the corresponding model results ignoring soil flexibility effect. The results show that the effect of surrounding soil medium leads to significant changes in the obtained dynamic response of the considered systems and hence cannot be simply ignored in damage assessment and response time-histories of structures where it increases response and amplifies damage of structures subjected to blast loads. Moreover, the numerical results provide an understanding of level of damage of structure through the computed damage indices.

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.125-135
• /
• 2007

An automated guided vehicle (AGV) system is a group of collaborating unmanned vehicles which is commonly used for transporting materials within manufacturing, warehousing, or distribution systems. The performance of an AGV system depends on the dispatching rules used to assign vehicles to pickup requests, the vehicle routing protocols, and the home location of idle vehicles, which are called dwell points. In manufacturing and distribution environments which emphasize just-in-time principles, performance measures for material handling are based on response times for pickup requests and equipment utilization. In an AGV system, the response time for a pickup request is the time that it takes for the vehicle to travel from its dwell point to the pickup station. In this article, an exact dynamic programming algorithm for selecting dwell points in a tandem-loop multiple-vehicle AGV system is presented. The objective of the model is to minimize the maximum response time for all pickup requests in a given shift. The recursive algorithm considers time restrictions on the availability of vehicles during the shift.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.108-115
• /
• 2002

This paper suggests a new analysis algorithm for the time historical response of three dimensional rectilinear structure which is frequently found in a pipe line system of plant by the combination of the transfer stiffness coefficient method(TSCM) and the Newmark method. The present analysis algorithm for a time historical response can improve the computational accuracy and time remarkably owing to advantages of the TSCM in comparison with transfer matrix method(TMM). The structural system is modeled as a lumped mass system in this method. The analysis algorithm was formulated far the three dimensional rectilinear structure. We confirmed the validity of the present algorithm by comparing the numerical computation results of TSCM with those of TMM.