• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.186-188
• /
• 2003

Rail Route Alignment in hilly terrain is a difficult task to implement as several natural constraints poses threat to the safety and stability of the alignment. The conventional methods followed to find out the final location survey or the feasibility analysis for alignment is time taking consuming. Some times, due to inaccessibility of the terrain it becomes impossible to carry out such works. The construction works in hilly terrain, which are associated with the proposed alignment, are not same as carried out in plane areas due to a vast contrast between the two areas. Different geological structures such as faults, thrusts, synclines and anticlines are a big problem to carry out normal construction practices. Thus for a safe and stable railway route in the unstable hilly areas, it is required to carry out the feasibility analysis of the proposed alignment to assist the policy makers for a successful implementation of the alignment. In the present work Remote Sensing and GIS has been successfully used to carry out geological feasibility and slope stability analysis for rail route alignment work.

• Quality Improvement in Health Care
• /
• v.2 no.2
• /
• pp.20-30
• /
• 1996

Background : Theoretically as the waiting-time of patient is estimated in queueing, many men and much money are needed. But being the estimation of patient s waiting-time very important in hospital service, so the continuous monitoring of waiting-time is inevitable. To verify that the estimation of waiting-time using parking time is economical, effective and continuous monitoring method and to develop utilizing the method, this study was done. Method : In parking confirmation office, the personnel of parking office wrote parking confirm time, chart number and whether medical examination and treatment finish or not in parking ticket. The next day the parking tickets were gathered and the above data were input. The input parking data were connected with the hospital outpatient file indexing chart number. Then the patient' s data for department, new patient or not, reservation or not, receipt time and payment time were retrieved. The group for finishing medical treatment were compared with that for not finishing in average time lag between confirmation and out-time for hospital. And In-time for hospital, receipt time, payment and out-time for hospital were also analyzed. Result : Confirming parking ticket, the group for finished medical treatment left hospital after 7 minutes. This result showed that the patient for finished medical treatment left hospital immediately. So parking time was reasonable to estimation of hospital-time was concluded. The time for medical treatment, diagnosis and test was constant for all patients and short for waiting time, Then I concluded that the parking time was reasonable for estimation patient's waiting time. Overall patient's waiting time was 113 minutes and new patient's time was 149 minutes, old patient's times was 109 minutes. Waiting time for reservation patient was 98 minutes and for non reservation patient was 122 minutes. The time from hospital arrival to payment was 50 minutes for the group of reservation patient and 69 minutes for non-reservation group. The time from payment to hospital leaving was 51 minutes and 56 minutes for non reservation group. The short time difference between reserved group and not reserved group from payment to hospital leaving time was due to bottle neck effect. Conclusion : The estimation of patient's waiting time using parking time was reasonable because the possession of car was common and the time for medical treatment was equal and the patient after treatment left hospital immediately. Using this method, timely, fast evaluation and continuous monitoring of the intervention effect were possible.

• Journal of Environmental Health Sciences
• /
• v.43 no.2
• /
• pp.157-166
• /
• 2017

Objectives: Exposure to hazardous air pollutants could be affected by sociodemographic factors such as age, gender and more. Information on time spent in microenvironments has a critical role in exposure assessment. The purpose of this study was to analyze the exposure pathways which influence personal exposure through time-activity patterns and sociodemographic factors. Methods: A total of 379 subjects were collected from the second term of the Korean National Environmental Health Survey. A questionnaire survey in relation to sociodemographic factors and a time-activity diary were carried out for personal exposure to toluene. Focusing on personal exposure to toluene, factors affecting personal exposure were analyzed using multiple regression analysis. Results: Participants spent their time in an indoor house for $16.8{\pm}4.0hr$, workplace or school $2.3{\pm}3.5hr$, and other indoor $2.1{\pm}2.2hr$. Sociodemographic factors were significantly different among each personal exposure and microenvironment. Time of staying at an office turned out to be a main factor from point of exposure in exposure pathway using multiple regression analysis. As a result, this means that exposure may be different according to the time of staying in each microenvironment. Conclusions: Personal exposure to air pollutants might be decided by time-activity pattern indicating when, where, and which activities people pursue, as well as individual sociodemographic factors.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.309-324
• /
• 2001

To apply the real-time kinematic GPS surveying technique, this research has tried to obtain the TOKYO datum first from the continuous reference stations distributed all over the country. Then, analysis of the geography of a coastal area including both of land and sea has been carried out by the post-processed continuous kinematic GPS technique and the real-time kinematic GPS surveying technique. After considering the initial conditions and measuring time zone for real-time kinematic GPS, post-processed and the real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller simultaneously. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM can be also constructed for the harbor reclamation, the dredging and the variation of soil movement in a river.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.197-205
• /
• 2013

Real time transient stability assessment mainly depends on real-time prediction. Unfortunately, conventional techniques based on offline analysis are too slow and unreliable in complex power systems. Hence, fast and reliable stability prediction methods and simple stability criterions must be developed for real time purposes. In this paper, two new methods for real time determining critical clearing time based on clustering identification are proposed. This article is covering three main sections: (i) clustering generators and recognizing critical group; (ii) replacing the multi-machine system by a two-machine dynamic equivalent and eventually, to a one-machine-infinite-bus system; (iii) presenting a new method to predict post-fault trajectory and two simple algorithms for calculating critical clearing time, respectively established upon two different transient stability criterions. The performance is expected to figure out critical clearing time within 100ms-150ms and with an acceptable accuracy.

• 방재와보험
• /
• s.110
• /
• pp.42-50
• /
• 2005

본 자료는 시사주간지 TIME, 2005년 5월 2일 자. " How to Get Out Alive" From hurricanes to 9/11: What the science of evacuation reveals about how humans behave in the worst of times를 번역한 것으로, 기사는 9/11 테러와 같은 극단적인 위기의 순간 오히려 죽음을 재촉하거나 방관하는 인간의 숨겨진 본능적 행동특성에 관한 고찰을 통해, 평소 어떤 자세와 마음가짐을 준비해야 죽음의 공간으로부터 신속하고 효과적으로 살아 나갈 수 있는지에 관한 과학적인 조사연구들을 소개하고 있다.

• The Korean Nurse
• /
• v.24 no.5 s.133
• /
• pp.61-72
• /
• 1986

This study was done to find out utilizational possibility for the unemployed experienced nurses as the part-time worker to the way of performing quality nursing care and hospital cost down view point. The data was collected from July to Sept, 1985, throug

• Journal of the Korean Society of Food Culture
• /
• v.26 no.4
• /
• pp.344-353
• /
• 2011

The objective of this study was to classify dining-out customers' behaviors at ski resorts based on their restaurant selection factors. Data were collected one-on-one via interview questionnaires of 178 customers at the ski resorts. The mean scores of important attributes (4.12) and satisfactory attributes (3.08) for the sport&leisure purpose group were analyzed. For the date&family trip purpose group, the important attributes (4.13) and satisfactory attributes (3.06) were evaluated, resulting in a significant difference between the two visiting-purpose groups by independent t-test (p<0.05). The recognized important attributes for the sport&leisure purpose group were food taste (4.54), hygiene (4.53), menu variety (4.22), menu price (4.15), and convenience (4.12), and the most recognizable satisfactory attributes were related to convenience (3.52), waiting time (3.95), and employee service (3.90). For the date&family trip purpose group, recognized important attributes were hygiene (4.83), food taste (4.67), menu price (4.40), convenient (4.33), menu variety (4.25), waiting time (4.21), and employee service (4.10), and marked satisfactory attributes were convenience (3.65), hygiene (3.31), atmosphere (3.25), employee service (3.23), waiting time (3.17), and food taste (3.00). These results suggest that restaurant selection attributes would be useful tools to restaurant managers in controlling the quality of foodservice and satisfying service requirements for dinning-out customers at ski resorts.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.305-311
• /
• 2013

PURPOSE. Over the past years, the adhesion of fiber posts luted with simplified adhesive systems has been a matter of great interest. The aim of this study was to assess the post retentive potential of a self-adhesive resin cement using different adhesive systems to compare the push-out bond strengths of fiber posts. MATERIALS AND METHODS. The post spaces of 56 mandibular premolar roots were prepared and divided into 4 experimental groups and further divided into 2 subgroups according to testing time (n=7). The fiber posts (Rely X Fiber Post) were luted with a self-adhesive resin cement (RelyX Unicem) and one of the following adhesive systems: no adhesive, a total-etch adhesive resin (Single Bond), a two-step self-etch adhesive resin (Clearfil SE Bond) and a one-step self-etch adhesive resin (Clearfil S3 Bond). Each root was cut horizontally, and 1.5 mm thick six root segments were prepared. Push-out tests were performed after one week or three months (0.5 mm/min). Statistical analysis were performed with three-way ANOVA (${\alpha}$=.05). RESULTS. Cervical root segments showed higher bond strength values than middle segments. Adhesive application increased the bond strength. For one week group, the total-etch adhesive resin Single Bond showed higher bond strength than the self-adhesive resin cement RelyX Unicem applied without adhesive resin at middle region. For 3 months group, the two-step self-etch adhesive resin Clearfil SE Bond showed the highest bond strength for both regions. Regarding the time considered, Clearfil SE Bond 3 months group showed higher bond strength values than one week group. CONCLUSION. Using the adhesive resins in combination with the self-adhesive resin cement improves the bond strengths. The bond strength values of two-step self-etch adhesive resin Clearfil SE Bond improved as time passes.

• Korean Journal of Health Education and Promotion
• /
• v.12 no.1
• /
• pp.111-127
• /
• 1995

This study was designed to investigate the relationships between children's physical growth and health and their raising conditions and to find out the important conditions to improve their physical growth and health. The rasing conditions were classified into three major parts; i. e., family conditions, conditions of nutrition up-taking, and conditions of rest or sleep and exercise or play. Then, the questionnaire including the items to survey these three areas of raising condition and the items to evaluate the health status were given to children' mothers or fathers and filled up by them. The data of their 4 anthropometric measures; body weight, stature, sitting height and chest girth, were also collected from their latest records of health examination. The data of health status were converted to health scores representing 6 domains of health; digestive organs, respiratory organs, auto-nerve systems, fatigue, others and health as a whole. Then, correlations of raising conditions were determined with four antropometric measures and 6 health scores as criterion variables. Then, number of families to live together, and child's birth order in the domain of family conditions, habits of unbalanced diet, eating frequency of eggs, fruits, green and yellow vegetables, light colored vegetables, milk products in the domain of nutrition up-take, and the time for study at home, the place for play, the number of friends to play with together, the hours for playing out of door, the hours for playing sports, and the hours to move their body for assisting house keeping were picked out to investigate their relationships with physical growth and health status. Then, their habits of unbalanced diet and eating frequency of eggs, green or yellow colored vegetables, and milk products were found more influential conditions and more over, birth order, the time for study at home, the time to play out of door showed moderate degree of connection with physical growth and health status in early childhood.