• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.313-315
• /
• 2005

In a power system, an out-of-step condition causes a variety of risk such as serious damage to system elements, tripping of loads and generators, mal-operation of relays, etc. Therefore, it is very important to detect the out-of-step condition and take a proper measure. Several out-of-step detection methods have been employed in relays until now Mo,;t common method used for an out-of-step detection is based on the transition time through the blocking impedance area in R-X diagram. Also, the R-R dot out-of- step relay, the out-of-step prediction method and the adaptive out-of-step relay using the equal area criterion (EAC) and Global Positioning Satellite (GPS) technology have been developed. This paper presents the out-of-step detection algorithm using the time variation of the complex power. The complex power is calculated and the mechanical power of the generator is estimated by using the electrical power, and then the out-of-step detection algorithm, which is based on the complex Power and the estimated mechanical power, is presented. This algorithm, may detect the instant when the generator angle passes the Unstable Equilibrium Point (UEP). The proposed out-of-step algorithm is verified and tested by using Alternative Transient Program/Electromagnetic Transient Program (ATP/EMTP) MODELS.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.101-109
• /
• 2012

Wood composites are a hygroscopic material and have ability to exchange its moisture content with air. This study investigated the formaldehyde emission and moisture content change of four wood composites (particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF), laminated HDF (L-HDF)) as a function of bake-out temperature and time. The composites were baked out for 1, 3, 5, 7, 10, 14, 21, and 28 days at temperatures of $20{\pm}2$, $35{\pm}2$, and $50{\pm}2^{\circ}C$ in a dry oven. The moisture content change was used to determine the emission bake-out of the composites. Best bake-out time results were obtained with after 7 days all composites. Formaldehyde emission values of composites decreased with decreasing moisture content for both temperatures. The formaldehyde emission results of bake-out temperature 35 and $50^{\circ}C$ showed a similar tendency.

• 가정과삶의질연구
• /
• 제7권2호
• /
• pp.1-13
• /
• 1989

The purpose of this stud is : (1) to figure out the amount of time being usually spent on the housework performed by the employed wives and (2) to find out factors influencing the total and the specified housework time. The major findings are the following : 1) A employed wife spends 374 minutes(6.2 hours) on the average a day on the housework. Compared with research results of the past, this shows little difference, and less 157 minutes than full time homeworker. Time connected with meals is 123minutes, clothing (68), management and marketing(64), family care(61), and housing care(58). 2) Family environment variables (the wife's education level, wife's employment status, income, young child's age and presence of employed housekeeper) significantly differentiates the housework time. In general, a wife with higher SES level spends less time for housework except family care. 3) Housework related variables (planning, preference, performance competency, and performance stand rd) significantly differentiate the specified houseworks. High planning, preference, and performance competency do not necessarily diminish the housework time except routine houseworks. High performance standard causes her to spend more time. 4) A wife' sex-role attitudes and a husbands attitudes perceived are more traditional, she spends more time.

• 대한가정학회지
• /
• 제42권8호
• /
• pp.113-121
• /
• 2004

This study used cupric sulfate as a bum-out agent. The concentration of cupric sulfate, temperature and time were varied with glycerin included or excluded on the properties of polyester ground fabrics. The results are as follows. The effect of carbonization with glycerin included was decreased, but removal of carbide with glycerin included was easier than that with glycerin excluded. The white index and tensile strength of polyester ground fabrics were decreased as the processing concentration, temperature and time increased. The shrinkage was increased as the processing concentration, temperature and time increased. The optimum conditions with cupric sulfate as the bum-out agent was 5％ concentration, 140$^{\circ}C$, 3min., and 3kgf/cm$^2$ and with cupric sulfate added to glycerin was 5％ concentration, 150$^{\circ}C$, 5min., and 3kgf/cm$^2$.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.757-772
• /
• 2003

We simulate the geographical effects on the onset time of sea breeze at Suyoung and Haeundae districts by using the LCM (Local Circulation Model). The following can be found out from the numerical simulation on Case I (real terrain) which considered the real geography of Busan metropolitan area. Especially, as a result of analyzing the land breeze path, it could be found along the coastline as it flows out through low land coastal area. To find out more about the effects of terrain and geography on the onset time of sea breeze, the results of numerical simulation of virtual geography are as follows. In Case II (flat terrain), to find out how the terrain slope affects the onset of sea breeze, flat land and the ocean was considered. As a result, convergence of nighttime air mass at a Suyoung area and nighttime strong wind speed phenomenon was not shown. In Case III (modified flat terrain), to find out the effects of the irregularity of coastline affecting the onset of sea breeze, numerical simulation was carried out by simplifying the complex coastline into segments of straight coastline. So land breeze system and changing process of sea breeze after sunrise at Suyoung and Haeundae was simulated almost in a similar manner. Through this we could find the effects of coastal irregularities on onset of sea breeze.

• 한국의류학회지
• /
• 제28권1호
• /
• pp.131-142
• /
• 2004

When the cotton/polyester fiber mixed fabrics were treated with ferrous sulfate and oxalic acid for burn out finishing, it was examined how the effects of process conditions as concentration of burn out agents, temperature, time and pressure act onto the properties of polyester ground fabrics. The results are as follows. The effect of burn out finishing by pressure was greated in 3 kgf/$\textrm{cm}^2$. The properties as white index and tensile strength of polyester ground fabrics were decreased according as processing concentration, temperature time increases. The shrinkage was increased according as processing concentration, temperature time increases. The optimum condition of burn out agents to ferrous sulfate was 30% concentration, 150$^{\circ}C$, 1 min, 3 kgf/$\textrm{cm}^2$ and to oxalic acid was 10% concentration, 110$^{\circ}C$, 1min, 3 kgf/$\textrm{cm}^2$. And the optimum of ferrous sulfate and oxalic acid used in combination was 10% ferrous sulfate and 7% oxalic acid, 110$^{\circ}C$, 1 min., 3 kgf/$\textrm{cm}^2$.

• Journal of applied mathematics & informatics
• /
• 제8권1호
• /
• pp.199-212
• /
• 2001

We consider a k-out-of-n system with repair under T-policy. Life time of each component is exponentially distributed with parameter $\lambda$. Server is called to the system after the elapse of T time units since his departure after completion of repair of all failed units in the previous cycle or until accumulation of n-k failed units, whichever occurs first. Service time is assumed to be exponential with rate ${\mu}$. T is also exponentially distributed with parameter ${\alpha}$. System state probabilities in finite time and long run are derived for (i) cold (ii) warm (iii) hot systems. Several characteristics of these systems are obtained. A control problem is also investigated and numerical illustrations are provided. It is proved that the expected profit to the system is concave in ${\alpha}$ and hence global maximum exists.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.909-914
• /
• 2006

The goal of this study was to investigate the behavior of sows and their piglets reared using the non-all-in all-out system and the all-in all-out system during a 3-week lactation period. The 24 Landrace${\times}$Yorkshire sows (range of parity: 2 to 4) and their litters (range of litter size: 8 to 13 piglets) for each treatment (8 sows/replication) were used in this experiment. The sows were housed in farrowing crates ($0.6{\times}2.1m$) located in pens ($2.4{\times}1.8m$) with totally perforated metal flooring. The crates were kept in an experimental room that was thermostatically controlled to approximately $23^{\circ}C$. A 250-W infrared heat lamp was turned on above the creep area during lactation. The sows and piglets were conventionally managed. The animals were recorded during a 24-h period at 1, 4, 7, 14 and 21 days postpartum. The videotapes were scanned every minute to obtain an instantaneous behavioral sample. In the behaviors of sows, lateral recumbency decreased and ventral recumbency increased from 1 day postpartum to 21 days postpartum. In comparison to the AIAOS, sows in the NAIAOS spent much less time on lateral recumbency (p<0.01), whereas they spent much more time on ventral recumbency and sitting at 4 days postpartum (p<0.05 and p<0.05). In the behaviors of piglets, lying increased and unsuccessful suckling decreased until 21 days postpartum. Compared to the AIAOS at 4 days postpartum, piglets in the NAIAOS spent less time lying (p<0.01), whereas they spent much more time walking and unsuccessful suckling (p<0.01 and p<0.05). These results suggest that the all-in all-out system may be preferable to the non-all-in all-out system for promoting welfare.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 추계학술대회논문집
• /
• pp.62-74
• /
• 1995

This study surveys four characteristics (overall density, local density, grouping, complexity) to effect user's performance on the on-line terminal displays of commercial banks, and makes the new screen by the screen design procedure. The new screen includes to increase the number of groups and to arrange the items on the screen. And then, this study carrys out experiments to compare performance(operating time and error number ) by each screen. The result is described that the operating time decreases about 20% at the new OUT-screen than the existing OUT-screens; about 25% at the new IN-screen.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.309-314
• /
• 2006

The linear Consecutive-k-out-of-n:F system consists of n component ordered linearly and fail if and only if at least k consecutive components fail. We assume that the components are independent and identical exponentially distributed. This paper develops a model to calculate the expected cost per unit time of a linear consecutive-k-out-of-n:F system. The optimization problem we consider regards the choice of the system structure parameter k to minimized the expected cost per unit time.