• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.4
• /
• pp.297-301
• /
• 2000

Planar optical waveguides which have a higher refractive index than that of substrate were fabricated by proton exchange between $Li^+$ and $H^+$. Benzoic acid was used as proton source and process was carried out under the various reaction time and temperature. The depth of waveguide layer and the generated mode number were investigated by standard prism coupler. The cut-off depth for the fabrication of single mode optical waveguides was obtained by the function which was expressed on refractive index profile. Finally the experimental conditions for cut-of depth of single mode could be confirmed. Channel waveguides were manufactured from these confirmed conditions and the effective confinement of the induced light into waveguides was observed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.404-407
• /
• 2008

Because of directly receiving the thing in which a microwave is reflected and comparing the frequency, the microwave sensor with doppler effect completely overcomes the problem of the passive infrared sensor. The microwave sensor with doppler effect well operates about a temperature, the dust, and the peripheral noise because of being dull in the most of ambient conditions. The system developed in this research is the electricity saving detection sensor which it senses the real time action of a man as the microwave sensor and automatically turns on the electric lamp and turns off, minimizes the electrical energy consumption. Since the microwave sensor is not influenced in the light, the dust, and the natural element like the ambient temperature, the effectiveness is considered to be superior to the passive infrared sensor being used currently. There was the energy reduction effect more than about 60% in the performed example which established this system. When this was compared with the construction cost, the cost of establishing payback period was about 1-1.5 year. The microwave sensor with doppler effect developed from this research result is convinced in the future to do enough for the electric energy saving.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.153-164
• /
• 2018

In semiconductor manufacturing, critical dimensions indicate the features of patterns formed by the semiconductor process. The purpose of measuring critical dimensions is to confirm whether patterns are made as intended. The deposition process for an organic light emitting diode (OLED) forms a luminous organic layer on the thin-film transistor electrode. The position of this organic layer greatly affects the luminescent performance of an OLED. Thus, a system for measuring the position of the organic layer from outside of the vacuum chamber in real-time is desired for monitoring the deposition process. Typically, imaging from large stand-off distances results in low spatial resolution because of diffraction blur, and it is difficult to attain an adequate industrial-level measurement. The proposed method offers a new superresolution single-image using a conversion formula between two different optical systems obtained by a deep learning technique. This formula converts an image measured at long distance and with low-resolution optics into one image as if it were measured with high-resolution optics. The performance of this method is evaluated with various samples in terms of spatial resolution and measurement performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.253-257
• /
• 2010

This experiment was carried out to investigate the effects of gamma-radiation on the rooting, growth, and color mutation in poinsettia. Using 10 poinsettia varieties ('Lollipop', 'Little Peace', 'Happy Day', 'Early Bird', 'Pixy Red', 'Happy Time', 'Heidi', 'Red Bell', 'Clara', and 'Scarlet') bred by National Institute of Horticultural and Herbal Science, 100 Gy of gamma ray was irradiated at the stage of callused cuttings. Four weeks after sticking cuttings in the rooting media, 8 cultivars showed 100% of root formation, but 'Early Bird' rooted 24.4% and even died off during the cutting propagation. After planting rooted cuttings, survival rate until flowering time varied among irradiated cultivars. While 'Pixy Red' and 'Heidi' survived about 98%, 'Clara', 'Happy Day', and 'Early Bird' survived lesser than 30%. All irradiated plants showed remarkably shorter plant height, lesser branch numbers than non-irradiated control plants. Thirty color mutants were obtained among 281 plants survived until flowering time. Nine mutants were complete color mutated branches, whereas 21 mutants were partially color mutated bracts and transitional leaves. Color patterns mutated by 100 Gy of gamma ray were divided into pink, hot pink, light red and spotted (pink spots with red main color). Pink mutants were commonly obtained. Complete color mutants were discovered from 4 plants of 'Pixy Red', 2 plants of 'Red Bell' and 3 plants of Lollipop.

• Cartoon and Animation Studies
• /
• s.50
• /
• pp.215-237
• /
• 2018

I analyze orange that is consistently used, even though not consciously, in the films whose function and meaning are clear. In detail, there are examples of color in films, psychological phenomena of colors expressed in posters and opening titles, color characteristics of clothes and costumes, and semiotic analysis of color names in film titles. (1) Fact and Truth; civilization and criticism. The film tries to tell the truth than the fact. It represents facts as it is, but it presupposes truth. This is a unique characteristic of media films. The truth of the fact is not important. The film tells the truth believing and wanting to show off. The film, which has inherent characteristics of the gap between fact and truth, represents nature and civilization. It carries nature as it is and criticizes the harm of civilization. Orange is nature and civilization. Realistic films such as Hong Sang Soo and Kim Ki Duk, fall into this category. For example, there are A Taxi Driver(2017) and I Can Speak(2017). (2) Virtual History; fake images and memories. In Hollywood SF genres like The Matrix(1999), orange was dealt with virtual reality. However, in Korean films they are replaced by historical dramas. The representation of history becomes a virtual reality. Films such as The Fortress(2017), Masquerade(2012), and Roaring Currents(2014) deal with virtual history. In these films, orange is a fake image and memory. (3) Light=color; Aura. The color and light of orange is aura. At sunrise and sunset, the orange of the incandescent light is almost similar to that of the artificial light. Orange of tungsten makes the real characters surrealistic and mysterious. For example, there are The City of Madness(2016), The Man from Nowhere(2010), and Coinlocker Girl(2014). (4) Fantasy; communication with other worlds. Orange is a sweet fantasy. In our daily life, we go to a supermarket, share a chat with friends in a coffee shop, and spend time in front of a television. Orange makes our life free and dreams. It is the communication between the former being and the other world. This can be found in the sexual fantasy scenes of all genres. For example, there are Sunny(2011), Welcome To Dongmakgol(2005), and 200 Pounds Beauty(2006).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.454-454
• /
• 2014

Silicon microwire array is one of the promising platforms as a means for developing highly efficient solar cells thanks to the enhanced light trapping efficiency. Among the various fabrication methods of microstructures, deep reactive ion etching (DRIE) process has been extensively used in fabrication of high aspect ratio microwire arrays. In this presentation, we show precisely controlled Si microwire arrays by tuning the DRIE process conditions. A periodic microdisk arrays were patterned on 4-inch Si wafer (p-type, $1{\sim}10{\Omega}cm$) using photolithography. After developing the pattern, 150-nm-thick Al was deposited and lifted-off to leave Al microdisk arrays on the starting Si wafer. Periodic Al microdisk arrays (diameter of $2{\mu}m$ and periodic distance of $2{\mu}m$) were used as an etch mask. A DRIE process (Tegal 200) is used for anisotropic deep silicon etching at room temperature. During the process, $SF_6$ and $C_4F_8$ gases were used for the etching and surface passivation, respectively. The length and shape of microwire arrays were controlled by etching time and $SF_6/C_4F_8$ ratio. By adjusting $SF_6/C_4F_8$ gas ratio, the shape of Si microwire can be controlled, resulting in the formation of tapered or vertical microwires. After DRIE process, the residual polymer and etching damage on the surface of the microwires were removed using piranha solution ($H_2SO_4:H_2O_2=4:1$) followed by thermal oxidation ($900^{\circ}C$, 40 min). The oxide layer formed through the thermal oxidation was etched by diluted hydrofluoric acid (1 wt% HF). The surface morphology of a Si microwire arrays was characterized by field-emission scanning electron microscopy (FE-SEM, Hitachi S-4800). Optical reflection measurements were performed over 300~1100 nm wavelengths using a UV-Vis/NIR spectrophotometer (Cary 5000, Agilent) in which a 60 mm integrating sphere (Labsphere) is equipped to account for total light (diffuse and specular) reflected from the samples. The total reflection by the microwire arrays sample was reduced from 20 % to 10 % of the incident light over the visible region when the length of the microwire was increased from $10{\mu}m$ to $30{\mu}m$.

• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.91-115
• /
• 2004

The main purpose of this study is to analyze the cooperative squid fisheries problems surrounding the $E128^{\circ}$, established by the 1965 Korea - Japan Fisheries Agreement which banned Korean large trawlers' fishing east to the $E128^{\circ}$ In fact, the moratorium was put on by Japans request. However, such issue did not occur until the filefish stock in the southern Korean sea, which was a major target fish species of the large trawl fisheries, The filefish stock collapsed completely around 1991 and at the same time most of bottom fish stocks in the East China Sea began to show a symptom of over - exploitation. Thus, the off - shore large trawlers learned to have a little opportunity of finding out alternative fish stocks as well as fishing grounds. Fortunately, at that time squid resource stock and consumption were on the increasing trend. The large trawl fisheries were able to economically exploit squid stock east to the $E128^{\circ}$ through cooperative fishing with squid angling light boats in the East and East - South Sea, even though such cooperative fishing activities violate the existing fishery laws apparently. Some important reasons that the large trawlers have continued the cooperative fishing seem to be because (ⅰ) squid resource stock has been on the increasing state over time, (ⅱ) the trawl fisheries have made a significant contribution to meeting domestic and export demands and stabilizing squid prices, and (ⅲ) they have kept domestic squid market from foreign competition. However, the new Korea - Japan fisheries agreement in 1998 provided a momentum of questioning the effectiveness of the $E128^{\circ}$ by the squid - related fisheries other than the squid angling. Serious conflicts between squid - related fisheries began to emerge and to be much intensified. Squid angling industries in the East opposed to large trawlers's efforts to formalize such illegal cooperative squid fishing activities. Their main argument was that such formalizing would definitely make the East coast squid prices lower and in turn their business performance would be worse off. The results of quantitative analysis suggest that the trawlers' massive landing may have a significant influence on lowering the east coast squid prices. Now, an important issue that the squid - related fisheries and the government are facing is to solve such complex squid fishing problems through a multi - participatory negotiation process, including price stabilization, total allowable catch level and its operation schemes, $E128^{\circ}$ rearrangement, and so on.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.139-146
• /
• 1999

The purpose of this study is to analyze the efficiency and working conditions of the patternwork departments by surveying the apparel manufacturing companies sampled in Seoul for their organization, working enviornment and technology of their patternwork departments, and thereby, find the ways to promote the functions of the patternwork department. The results of this study can be summarized as follows; 1. As a result of analyzing the working environment of patternwork departments, it was found that the problems counted by most of the pattern workers were lack of workforce, unhygienic or unpleasant workplaces. 2. As a consequence of analyzing the sample production in terms of tacking methods and times, They rarely tacked the white cotton. Such an omission of tacking procedure may serve to save time, but if a sewing error occurs, the working time would rather be longer due to the defects of pattern to be remedied. 3. As a result of reviewing the general patternwork conditions, it was found that the patterns were still worked out in two dimensions. On the other hand, more than 60% of the pattern workers were applying to their patternworks the styles which they had learned from their seniors. Few patterns are being developed in conformity to apparel trends or body shape changes. 4. As a consequence of examining the problems involving the production of patternsl, the problems involved primarily the patterns incised off no-dart pattern and body structure, and in light of items, involved mainly the trousers and in light of material, involved much the stretch or velvet. Moreover, it is deemed necessary to establish a special institute devoted to a systematic development of pattern technology. 5. Most of the CAD patternworks are used not for pattern designing but for grading and marking works, which suggests that pattern workers need to be educated on this new technology for more diverse and precise patternworks. 6. Lastly, as a result of examining the conditions of patternwork departments and their relevant works, most of the pattern workers were found to be subject to irregular and excessive workload, having little time to produce good patterns. This finding suggests that it is necessary to mandate the pattern workers to more involve the commodity planning.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.774-784
• /
• 2017

Occupancy sensors installed in buildings and households turn off the light if the space is vacant. Currently PIR (pyroelectric infra-red) motion sensors have been utilized. Recently, the researches using camera sensors have been carried out in order to overcome the demerit of PIR that can not detect static people. If the tradeoff of cost and performance is satisfied, the camera sensors are expected to replace the current PIRs. In this paper, we propose vision sensor-based occupancy detection being composed of tracking, recognition and detection. Our softeware is designed to meet the real-time processing. In experiments, 14.5fps is achieved at 15fps USB input. Also, the detection accuracy reached 82.0%.