• 제목/요약/키워드: time-domain boundary element method

검색결과 124건 처리시간 0.025초

경계요소법에 의한 점탄성재료의 과도열응력 해석 (Analysis of Transient Thermal Stresses in Viscoelastic Solids Using Boundary Element Method)

  • 이상순;김태형
    • 전산구조공학
    • /
    • 제8권2호
    • /
    • pp.141-145
    • /
    • 1995
  • 이 논문은, 선형점탄성체가 과도온도상태에 있을때의 거동을 시간영역 경계요소법에 의해 해석하고 있다. 점탄성체에 대해서 '열유동단순'거동을 가정하였다. 경계요소 공식화과정을 설명한 후, 예제문제에 대한 수치해석 결과를 보여주었다.

  • PDF

섬유가 보강된 단일방향 점탄성 복합재료에 발생하는 특이 잔류 열응력의 경계요소해석 (Boundary Element Analysis of Singular Residual Thermal Stresses in A Fiber-Reinforced Unifirectional Viscoelastic Laminate)

  • 이상순;박준수
    • 전산구조공학
    • /
    • 제9권4호
    • /
    • pp.181-187
    • /
    • 1996
  • 이 논문에서는, 탄성 섬유와 점탄성 기지로 구성된 2차원의 단일방향 복합재료가 높은 제작온도로 부터 실온으로 냉각될때 섬유와 기지사이의 계면에서 발생하는 특이 열응력을 조사하고 있다. 계면을 따라 발생하는 잔류 열응력의 특성을 조사하는데 시간영역 경계요소법을 적용하였다. 수치해석 결과에 의하면, 계면응력들은 자유경계면 근처에 이르러 급속히 커지는데, 이러한 특이 잔류응력들은 자유경계면 가까이에서 국부 항복을 일으키거나 섬유와 기지의 결합분리를 야기시킬수 있다.

  • PDF

재료내 기공결함에 의한 SH형 초음파 원거리 산란장의 신호특성에 대한 수치해석 (Numerical Analysis on the Signal Characteristics for Scattered Far-field of Ultrasonic SH-Wave by the Internal Cavity)

  • 이준현;이서일;박윤원
    • 대한기계학회논문집A
    • /
    • 제24권1호
    • /
    • pp.163-172
    • /
    • 2000
  • In this study, the scattered far-field due to a cavity embedded in infinite media subjected to the incident SH-wave was calculated by the boundary element method. The effects of cavity shape and distance between internal cavity and internal point in infinite media were considered. The scattered far-field of the frequency domain was transformed into the signal of the time domain by using the Inverse Fast Fourier Transform(IFFT). It was found that the amplitude of scattered signal in time domain decreased with the increase of the distance between the detecting points of ultrasonic scattered field and the center of internal cavity in media. In addition, the time delay was clearly found in time domain waveform as the distance between the detecting points of ultrasonic scattered field and the center of internal cavity was gradually increased.

균열이 있는 선형 점탄성체의 변형에너지 방출률 G(t)에 대한 경계요소 해석 (Boundary Element Analysis of Strain Energy Release Rate G(t) for Cracked Viscoelastic Solids)

  • 박명규;이상순;서창민
    • 대한기계학회논문집A
    • /
    • 제27권12호
    • /
    • pp.2072-2078
    • /
    • 2003
  • In this paper, the boundary element analysis of viscoelastic strain energy release rate G(t) for the cracked linear viscoelastic solids has been attempted. This study proposes the G(t) equation and the calculating method of G(t) by time-domain boundary element analysis for the viscoelastic solids. The G(t) is defined as the derivative of the viscoelastic potential energy II(t) with respect to crack length a. Two example problems are presented to show the applicability of the proposed method to the analysis of the cracked linear viscoelastic solids. Numerical results of example problems show the accuracy and effectiveness of the proposed method.

비선형 지반-구조물 상호작용해석을 위한 새로운 복합법 (A New Hybrid Method for Nonlinear Soil-Structure Interaction Analysis)

  • 김재민;최준성;이종세
    • 한국지진공학회논문집
    • /
    • 제7권6호
    • /
    • pp.1-7
    • /
    • 2003
  • 이 논문에서는 비선형 지반-구조물 상호작용해석을 위한 새로운 시간-주파수영역 복합법을 제시하였다. 제안한 방법은 등가선형 지반-구조물 상호작용해석 프로그램과 범용 비선형 유한요소해석 프로그램을 동시에 사용하는 실용적인 방법이다. 이 방법에서는 먼저 주파수영역에서 등가선형 지반-구조물 상호작용해석을 수행하여 유한요소 영역의 경계면에서 응답을 구한 다음, 이를 범용 비선형 유한요소해석 프로그램에 의한 비선형 동적해석의 시간의존 경계조건으로 입력한다. 제안된 방법의 검증을 위하여 2차원 지하철 정거장 구조물에 대한 지진해석을 수행하였다. 이를 위하여 등가선형 지반-구조물 상호작용해석 프로그램 KIESSI-2D와 비선형 유한요소해석 프로그램 ANSYS를 사용하였다 수치적인 해석결과로부터 이 연구에서 제안한 방법의 타당성을 확인할 수 있었다.

수분 흡수로 인해 얇은 필름에 발생하는 계면 응력의 경계요소해석 (Boundary Element Analysis of Interface Stresses in a Thin Film Due to Moisture Absorption)

  • 이상순
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1999년도 봄 학술발표회 논문집
    • /
    • pp.19-26
    • /
    • 1999
  • This paper deals with the stress singularity induced at the interface corner between the viscoelastic thin film and the rigid substrate as the film absorbs moisture from the ambient environment. The rime-domain boundary element method is employed to investigate the behavior of interface stresses. The order of the free-edge singularity is obtained numerically for a given viscoelastic model. It is shown that the free-edge stress intensity factor is relaxed with time,'while the order of the singularity increases with time for the viscoelastic model considered.

  • PDF

반도체 칩 접착 계면에 존재하는 모서리 균열 거동에 대한 점탄성 해석 (Viscoelastic Analysis for Behavior of Edge Cracks at the Bonding Interface of Semiconductor Chip)

  • 이상순
    • 한국전산구조공학회논문집
    • /
    • 제14권3호
    • /
    • pp.309-315
    • /
    • 2001
  • 탄성 반도체 칩과 점탄성 접착제층의 계면에 존재하는 모서리 균열에 대한 응력확대계수를 조사하였다. 이러한 균열들은 자유 경계면 부근에 존재하는 응력 특이성으로 인해 발생할 수 있다. 계면 응력상태를 해석하기 위해서 시간 영역 경계요소법이 사용되었다. 작은 크기의 모서리 균열에 대한 응력확대계수가 계산되었다. 점탄성 이완으로 인해 응력확대계수의 크기는 시간이 경과함에 따라 작아진다.

  • PDF

명시적 주파수종속 2차원 무한요소를 사용한 지반-구조물 상호작용의 시간영역해석 (Soil-Structure Interaction Analysis in the Time Domain Using Explicit Frequency-Dependent Two Dimensional Infinite Elements)

  • 윤정방;김두기
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1997년도 가을 학술발표회 논문집
    • /
    • pp.42-49
    • /
    • 1997
  • In this paper, the method for soil-structure interaction analyses in the time domain is proposed. The far field soil region which is the outside of the artificial boundary is modeled by using explicit frequency-dependent two dimensional infinite elements which can include multiple wave components propagating into the unbounded medium. Since the dynamic stiffness matrix of the far field soil region using the proposed infinite elements is obtained explicitly in terms of exciting frequencies and constants in the frequency domain, the matrix can be easily transformed into the displacement unit-impulse response matrix, which corresponds to a convolution integral of it in the time domain. To verify the proposed method for soil-structure interaction analyses in the time domain, the displacement responses due to an impulse load on the surface of a soil layer with the rigid bed rock are compared with those obtained by the method in the frequency domain and those by models with extend finite element meshes. Good agreements have been found between them.

  • PDF

그래픽 에디터를 이용한 자동 요소 분할에 관한 연구 (A mesh generation method using PC graphic editor)

  • 김동일;유형선
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.726-729
    • /
    • 1991
  • In this paper it is discussed about the program which makes automatically the preprocessing data on the graphic editor of PC monitor. Three kinds of colors are used in order to make know a boundary_element, in_element, out_element. By initial mesh generation, three kinds of elements are made; the element with three nodes, four nodes, five nodes. The node of boundary element draw a vertical line to the boundary. At that time the element with three nodes is removed and the element with four nodes is changed to the element with four nodes. The domain graphic on this paper is compose of piecewise curves which has many lines and a hole. The data of element is written on the memory of PC computer. The program controls the memory address according to the change of element's quantity; disappearance and addition of element. All this work is operated on the PC computer.

  • PDF

국부범함수를 사용한 교류자장 문제의 유한요소 해석 (Finite-EIement Analysis with Localized Functional for Alternating Magnetic Field Problems)

  • 김원범;정현교;고창섭;한송엽
    • 한국자기학회지
    • /
    • 제1권2호
    • /
    • pp.79-84
    • /
    • 1991
  • 개 영역 교류자장 문제 해석을 위해 구부범함수를 사용한 변분법을 제시한다. 이 방법에 사용되는 국부범함수는 유한요소영역에 대한 영역적 분항과 유한요소영역과 무한요소영역 사이의 공유 경계면에 대한 경계적분항의 합으로써 이루어 진다. 경계적분항은 무한 계산영역에 대한 범함수의 무 한요소영역에 대한 영역적분항을 고유경계면에 대한 경계적분으로 치환시킴으로써 얻어진다. 본 논문 에서 제시한 방법을 이론해를 알고 있는 모델에 적요시켜 수치해석 결과를 얻고 그 결과를 이론해와 비교하여 보았다. 본 방법을 사용함으로써 이론해와 잘 일치하는 수치해석 결과를 덩었으며, 그리고 개 영역 교류자장 문제해석에 있어서 계산영역을 축소시킬 수 있기 때문에 컴퓨터 기억용량 감소 및 계산시간을 대폭 단축 시킬 수 있을 것이다.

  • PDF