• Wind and Structures
• /
• v.23 no.6
• /
• pp.559-575
• /
• 2016

In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in $350^{\circ}$ to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in $330^{\circ}$ under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.171-185
• /
• 2006

A sophisticated reliability analysis method is proposed to evaluate the reliability of real nonlinear complicated dynamic structural systems excited by short duration dynamic loadings like earthquake motions by intelligently integrating the response surface method, the finite element method, the first-order reliability method, and the iterative linear interpolation scheme. The method explicitly considers all major sources of nonlinearity and uncertainty in the load and resistance-related random variables. The unique feature of the technique is that the seismic loading is applied in the time domain, providing an alternative to the classical random vibration approach. The four-parameter Richard model is used to represent the flexibility of connections of real steel frames. Uncertainties in the Richard parameters are also incorporated in the algorithm. The laterally flexible steel frame is then reinforced with reinforced concrete shear walls. The stiffness degradation of shear walls after cracking is also considered. The applicability of the method to estimate the reliability of real structures is demonstrated by considering three examples; a laterally flexible steel frame with fully restrained connections, the same steel frame with partially restrained connections with different rigidities, and a steel frame reinforced with concrete shear walls.

• Journal of the Korean earth science society
• /
• v.32 no.1
• /
• pp.21-32
• /
• 2011

Using six-year (2004-2009) SKYNET measurements, MODIS-derived AOTs were validated at five SKYNET sites (Seoul, Chiba, Etchujima, Fukuejima, and Hedomisaki), in addition to climatological analysis of MODIS-derived optical properties over the East Asian domain ($20-50^{\circ}N$, $90-150^{\circ}E$). In so doing MODIS-SKYNET collocated AOT data were constructed if two measurements are taken within 25 km distance and within 30 minute time difference. From the comparison of two measurements, it is demonstrated that aerosol type insignificantly affects the accuracy of MODIS AOT. It is because the aerosol model combining predefined fine aerosol model and coarse aerosol model is used for the retrieval. However, positive bias between MODIS and SKYNET increases as fraction of the coarse aerosol model increases. In addition, MODIS AOT appears to be overestimated in case of lower aerosol loading while the overestimation tends to decrease with increased aerosol loading. Regression analysis between MODIS AOT and SKYNET AOT for 550 nm band yields 0.86, 0.16, and 0.61 of regression slope, intercept, and coefficient of determination, respectively. Those statistical results may draw a conclusion that MODIS AOTs over East Asia carry a reasonable accuracy compared to ground-based SKYNET measurements.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.194-201
• /
• 2014

This paper is able to be solved by improving degradation in multi-path environment by adjust beam pattern angle through modifying pulse phase of each antennas by using TRM (Transmitter Receiver Module). Beam Scanning Array Antenna, which is transmitter/receiver that improves degradation in multi-path environment without any signal distortion, is designed and manufactured. Beam Scanning Array Antenna should be able to send/receive signal at the antenna's longitudinal part without distortion and should not influences other systems. Also, it should include target detecting ability by beam steering.Dispersion characteristic of Beam Scanning Antenna, which is designed, is analysed by using fidelity, and steering and radar resolution performance is verified by using $1cm{\times}1cm$ sized target. To manufacture Beam Scanning Array Antenna, control board and GUI, which is able to control Vivaldi Antenna for IR-UWB, Tri-Band Wilkinson power divider, and TRM (Transmitter Receiver Module), is designed. Throughout this research, developed Beam Scanning UWB Array Antenna system is adoptable for radar application field. and time domain analysis techniques by using network analyser made the antenna characteristics analysis for setting up antenna more accurate. In addition, it makes beam width checking without difficulties.

• Korean Journal of Plant Resources
• /
• v.30 no.5
• /
• pp.571-577
• /
• 2017

Abscisic acid (ABA) is an important phytohormone involved in abiotic stress tolerance in plants. The group A bZIP transcription factors play important roles in the ABA signaling pathway in Arabidopsis but little is known about their functions in rice. In our current study, we have isolated and characterized a group A bZIP transcription factor in rice, OsABF3 (Oryza sativa ABA responsive element binding factor 3). We examined the expression patterns of OsABF3 in various tissues and time course analysis after abiotic stress treatments such as drought, salinity, cold, oxidative stress, and ABA in rice. Subcellular localization analysis in maize protoplasts using a GFP fusion vector further indicated that OsABF3 is a nuclear protein. Moreover, in a yeast one-hybrid experiment, OsABF3 was shown to bind to ABA responsive elements (ABREs) and its N-terminal region found to be necessary to transactivate a downstream reporter. A homozygous T-DNA insertional mutant of OsABF3 is more sensitive to salinity, drought, and oxidative stress compared with wild type plants ＆ OsABF3OX plants. In addition, this Osabf3 mutant showed a significantly decreased sensitivity to high levels of ABA at germination and post-germination. Collectively, our present results indicate that OsABF3 functions as a transcriptional regulator that modulates the expression of abiotic stress-responsive genes through an ABA-dependent pathway.

• Geotechnical Engineering
• /
• v.10 no.1
• /
• pp.47-62
• /
• 1994

It has been well known that the rainfall-triggered rise of groundwater levels is one of the most important factors resulting the instability of the hillside slopes. Thus, the prediction of porewater pressure is an essential step in the evaluation of landslide hazard. This study involves the development and verification of numerical groundwater flow model for the prediction of groundwater flow fluctuations accounting for both of unsatu나toed flow and saturated flow on steep hillside slopes. The first part of this study is to develop a nomerical groundwater flow model. The numerical technique chosen for this study is the finitro element method in combination with the finite difference method. The finite element method is used to transform the space derivatives and the finite difference method is used to discretize the time domain. The second part of this study is to estimate the unknown model parameters used in the proposed numerical model. There were three parameters to be estimated from input -output record $K_e$, $\psi_e$, b. The Maximum -A-Posteriori(MAP) optimization method is utilized for this purpose, . The developed model is applied to a site in Korea where two debris avalanches of large scale and many landslides of small scale were occurred. The results of example analysis show that the numerical groundwater flow model has a capacity of predicting the fluctuation of groundwater levels due to rainfall reasonably well.

• Development and Reproduction
• /
• v.20 no.4
• /
• pp.297-304
• /
• 2016

Lectins belong to the pattern-recognition receptors (PRRs) class and play important roles in the recognition and elimination of pathogens via the innate immune system. Recently, it was reported that lily-type lectin-1 is involved when a pathogen attacks in the early immune response of fish. However, this study is limited to information that the lectin is involved in the innate immune response against viral infection. In the present study, the lily-type lectin-2 and -3 of Oplegnathus fasciatus (OfLTL-2 and 3) have been presented to be included B-lectin domain and two D-mannose binding sites in the amino acid sequence that an important feature for the fundamental structure. To investigate the functional properties of OfLTLs, the tissue distribution in the healthy rock bream and temporal expression during early developmental stage analysis are performed using quantitative real-time PCR. OfLTL-2 and 3 are predominantly expressed in the liver and skin, but rarely expressed in other organ. Also, the transcripts of OfLTLs are not expressed during the early developmental stage but its transcripts are increased after immune-related organs which are fully formed. In the challenge experiment with RBIV (rock bream iridovirus), the expression of OfLTLs was increased much more strongly in the late response than the early, unlike previously known. These results suggest that OfLTLs are specifically expressed in the immune-related tissues when those organs are fully formed and it can be inferred that the more intensively involved in the second half to the virus infection.

• Journal of Science of Art and Design
• /
• v.9
• /
• pp.49-87
• /
• 2006

Narrative has broad domains. So it is related to the everything man faces in his daily life and also performed in various modes. Narrative is revealed through all media including a character, which is also applied to plastic art. And narrative objects formed beyond the differences in media aid forms of expression are commonly based on a language. The study on such objects which created a new conceit of narratology can be said to be a spiritual trend by which to understand the world and man from the viewpoint of a 'story'. Plastic art took high interest in narrative in the same period as the rise of postmodernist art in the latter half of the 20th century, which was also applied to sculpture. The researcher, therefore, investigated through the history of sculpture in the 20th century the process in which narrative was denied under the value system of modernism and reappeared with the quickening of postmodernism. And as a result this period could be briefly characterized by 'return to figure' and 'reappearance of narrative'. The is, such flow means that late sculpture converted its center of interest from simple geometric abstract forms to irregular, figurative images. The researcher chose as the subject of his study the work of Louise Bourgeois, who was judged to have performed narrative positively and successfully among a great number of performed narrative positively and successfully among a great number of postmodernist sculptors who adopted it as their own strategy of expression. As the central artist of postmodrnist sculpture, She expressed human desire and condition as sexuality through the introspection of her own personal experience in contrast to the character of pop art sensitive to external world. The researcher borrowed narrative semiotics as a method of analyzing more elaborately the problem about the generation of narrative shown in her works. For it, he selected as the sample work for analysis Bourgeois's , which were judged to contain narrative most abundantly and as the metaphor of a gaze and recollection presented a new woman self that sublimed love, hatred, and loneliness. The narrative in her works are characterized by introspection questioning one's own trauma. It has independent domain and characteristics and clearly reveals narrative and content-centered characteristics, which are commonly discovered in postmodernist sculpture. The researcher could more concretely and definitely understand the characteristics of narrative through figurative images by analyzing the sample work. The researcher wanted to call your attention to the fact that the sculpture in the late 20th century contained narrative commonly and uniformly despite being characterized by various expressions and modes. And the focused on highlighting the fact that the narrative was more effectively revealed through figurative images of human body and simultaneously analyzing the formalizing process and structure for narrative. Besides he wanted to argue that the position of narrative defining the characteristics of sculpture should be valued more justly. Also, such acceptance of narrative, which is discovered in the sculpture, will have to be understood as the characteristics of the period reflecting the cultural aspect of the present time.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.28 no.2
• /
• pp.71-84
• /
• 2014

The full-length heat shock protein 88 (HSP88) complementary DNA (cDNA) of Paecilomyces tenuipes Jocheon-1 was obtained by screening the Paecilomyces tenuipes (P. tenuipes) Jocheon-1 Uni-Zap cDNA library and performing 5' RACE polymerase chain reaction (PCR). The P. tenuipes Jocheon-1 HSP88 cDNA contained an open reading frame (ORF) of 2,139-basepair encoding 713 amino acid residues. The deduced amino acid sequence of the P. tenuipe s Jocheon-1 HSP88 cDNA showed 77% identity to Nectria haematococca HSP88 and 45-76% identity to other fungal homologous HSP88s. Phylogenetic analysis and BLAST program analysis confirmed that the deduced amino acid sequences of the P. tenuipes Jocheon-1 HSP88 gene belonged to the ascomycetes group within the fungal clade. The P. tenuipes Jocheon-1 HSP88 also contained the conserved ATPase domain at the N-terminal region. The cDNA encoding P. tenuipes Jocheon-1 HSP88 was expressed as an 88 kilodalton (kDa) polypeptide in baculovirus-infected insect Sf9 cells. Under higher temperature conditions for the growth of the entomopathogenic fungus, mRNA expression of P. tenuipes Jocheon-1 HSP88 was quantified by real time PCR (qPCR). The results showed that heat shock stress induced a higher level of mRNA expression compared to normal growth conditions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.213-221
• /
• 2018

South Korea has been reluctant to open its geospatial information overseas to ensure security as a divided country. However, this cannot continue as the domestic and international environments related to geospatial information and the industrial ecosystem of information and communication technologies have been changing dramatically. Within this context, this study aims to analyze the causal relations among relevant variables and how they change and interact with time using a systems thinking process. First, causal maps were created for the domains of national security, map-based convergence service, and corporate competition. Then, the causal maps for each domain were integrated, based on which the points for policy intervention and dominant feedback loops were identified. The analysis results showed that securing the self-sufficiency of domestic geospatial businesses is a key element to determine the whole causal map, and the variable that changes the dominant feedback loop from a vicious circle to a virtuous one is the decision to open geospatial information overseas. In this study, I found the policy leverage that is a policy intervention point that can produce a great effect with little input by building a causal map of the interactions between major variables. This study is significant in that it identified and analyzed the dominant feedback loop as to which causal structure would dominate the system in the long term. The results of this study can be used to discuss not only the impacts of map data overseas opening on the national security and geospatial information industry, but also the interactions in the future when Google or other global companies request to release the geospatial information.