• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2003년도 춘계학술대회논문집
• /
• pp.15-18
• /
• 2003

전자파 산란해석 방법으로서 유한요소법, 경계요소법 및 모멘트법 등은 임의 구조를 한 산란체의 산란현상을 다룰 수 있다. 그러나 이러한 해석방법들은 정상 파동문제를 다루는데 편중되어 있어 시간영역에서의 비정상 파동문제를 해석하기 위해서는 여러 가지 제약이 따른다. 본 논문에서는 본질적으로 시간영역 해석방법인 TLM(Transmission Line Matrix)법을 이용하여 프레넬 렌즈의 산란특성을 해석하고 키르호프의 근사식과 PO(Physical Optics)법과 비교 검토하여 그 유효성을 검증한다.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.685-690
• /
• 2000

This paper deals with the stress singularity induced at the interface corner between the viscoelastic thin film and the rigid substrate as the film absorbs moisture from the ambient environment. Th e time domain boundary element method is employed to investigate the behavior of interface stresses. The order of the free-edge singularity is obtained numerically for a given viscoelastic model. It is shown that the stress singularity factor is relaxed with time, while the order of the singularity increases with time for the viscoelastic model considered.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.21-32
• /
• 2004

The non-cavitating noise of underwater propeller is considered numerically in this study. The main purpose is to analyze non-cavitating noise from underwater propellers in various operating conditions with different configurations. Noise is predicted by using time-domain acoustic analogy, boundary element method, and computational hydro-acoustics. The flow field is analyzed with potential-based panel method, and then time-dependant pressure data are used as the input for Focus Williams-Hawkings formulation to predict far field acoustics. Furthermore, boundary element method and computational hydro-acoustics are also considered to investigate duct propeller and ducted multi-stage propeller to consider the reflection and diffraction of sound waves. With this methodology, noise intensity and directivity of each noise sources could be well analyzed.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.312-326
• /
• 2012

This paper considers a fully coupled 3D BEM-FEM analysis for the ship structural hydroelasticity problem in waves. Fluid flows and structural responses are analyzed by using a 3D Rankine panel method and a 3D finite element method, respectively. The two methods are fully coupled in the time domain using a fixed-point iteration scheme, and a relaxation scheme is applied for improve convergence. In order to validate the developed method, numerical tests are carried out for a barge model. The computed natural frequency, motion responses, and time histories of stress are compared with the results of the beam-based hydroelasticity program, WISH-FLEX, which was thoroughly validated in previous studies. This study extends to a real-ship application, particularly the springing analysis for a 6500 TEU containership. Based on this study, it is found that the present method provides reliable solutions to the ship hydroelasticity problems.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.232-248
• /
• 2009

Numerical methodology to solve ship springing problem, which is basically fluid-structure interaction problem, was explored in this study. Solution of this hydroelasticity problem was sought by coupling higher order B-spline Rankine panel method and finite element method in time domain, each of which is introduced for fluid and structure domain respectively. Even though varieties of different combinations in terms of numerical scheme are possible and have been tried by many researchers to solve the problem, no systematic study regarding the characteristics of each scheme has been done so far. Here, extensive case studies have been done on the numerical schemes especially focusing on the iteration method, FE analysis of beam-like structure, handling of forward speed problem and so on. Two different iteration scheme, Newton style one and fixed point iteration, were tried in this study and results were compared between the two. For the solution of the FE-based equation of motion, direct integration and modal superposition method were compared with each other from the viewpoint of its efficiency and accuracy. Finally, calculation of second derivative of basis potential, which is difficult to obtain with accuracy within grid-based method like BEM was discussed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.115-127
• /
• 1997

A study to evaluate the seismic response of $\frac{1}{2}$-scaled liquid storage tank constructed in Hualien, is performed. And this study is to identify the liquid-structure-soil interaction by observed earthquake data ans analyzed results. After the calculation of soil impedance for the test site by SASSI code, 3-dimensional seismic response analysis is performed by BEM-FEM-Impedance Method with the consideration of liquid-structure-soil interaction when the tank is excited by real earthquake. The observed acceleration and hydrodynamic pressure are compared with the numerical results. This comparisons show good agreement in predominant frequency and maximum hydrodynamic pressure. And the free surface sloshing motion due to earthquake loadings is computed in time domain.

• 한국전산구조공학회논문집
• /
• 제13권1호
• /
• pp.97-103
• /
• 2000

이 논문에서는, 반도체 칩과 리드프레임을 결합하는 과정에서 점탄성 접착제층에 발생하는 잔류응력 문제를 다루고 있다. 접착제층은 “열유동단순”거동을 한다고 가정하였다. 접착제층에서의 응력들은 경계요소법을 사용하여 조사하였다. 매우 큰 응력 구배가 계면 모서리에서 발생하는데, 그러한 응력들은 국부 항복을 일으키거나, 칩과 리드프레임의 박리를 야기시킬 수 있음을 보여주고 있다.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.107-112
• /
• 2011

The aim of this study is to analyze the hydrodynamic properties of a 2D floating body with moon pool using a 2D fully nonlinear Numerical Wave Tank(NWT). This NWT was developed based on the Boundary Element Method(BEM) with potential theory and fully nonlinear free surface boundary conditions. Free surface elevations in the moon pool were calculated in the time domain for various frequencies of forced body motions. The added-mass and damping coefficients of the heaving body were also obtained. The present numerical results were compared with the analytic and experimental results and their accuracy was verified.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.440-446
• /
• 2018

The effects of an anti-rolling tank (ART) on vessel motions were numerically investigated. The potential-based BEM vessel motion simulation program and particle-based computational fluid dynamics program were dynamically coupled and used to perform a simulation of vessel motions with ART. From the time domain simulation results, the response amplitude operators for sway and roll motions were obtained and compared with the corresponding experimental and numerical results. Because the main purpose of ART was only to reduce roll motions, it was important to show that the natural properties of a floating vessel were not changed by the effects of ART. Various ART filling ratios and several ART positions were considered. In conclusion, ART only reduced the roll motion regardless of its filling ratio and position.

• 비파괴검사학회지
• /
• 제20권2호
• /
• pp.138-149
• /
• 2000

본 논문에서는 유한 고체내 초음파 전파 및 산란 현상의 해석을 위한 다양한 경계요소 모델링 기법이 제시되었다. 박판 재료내 유도초음파 전파에 대한 모드해석을 위해 비균질 적충 박판 구조물에 대한 탄성동역학 경계치 문제가 설정되었으며 이에 대한 수치해로부터 유도초음파의 전파특성을 나타내는 분산곡선이 얻어졌다. 파동 산란시 발생되는 기하학적 복잡성과 모드변환 문제를 수치적으로 모델링하기 위해 탄성 동역학 경계요소법을 적용하였고 이를 박판내 유도초음파의 이론적 직교 모드의 중첩해와 결합시킨 혼합형 경계요소법으로 확장하여 유한 고체내 다중 모드변환의 효율적 모델링법이 제안되었다. 주파수 영역의 수치해로부터 시간 의존 문제의 파동신호 예측을 위해 역 푸리에(Fourier) 변환을 통한 시간 영역 파동산란 신호가 얻어졌다. 이와 함께 실제 초음파 탐상조건에 보다 가까운 파동산란 문제의 모델링을 위해 3차원 경계요소법을 소개하고, 개발중인 3차원 경계요소 프로그램을 이용하여 유한 직경을 갖는 봉재내의 파동 전파를 수치적으로 해석하여 해석해와 비교 검증하였다. 본 논문에서 제시된 탄성파동 모델링 기법은 정량적 비파괴 평가법을 확립하는데 다양하게 응용될 수 있을 것으로 기대된다.