• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.780-785
• /
• 2006

The composition analysis of various radish (Rapharnus sativus L.) leaves and the effects of drying condition on the quality characteristics of hot-air dried radish leaves were carried out by a response surface methodology. Independent variables put in drying temperature $(X_1)$ and drying time $(X_2)$, dependent variables put in color, calcium, iron, vitamin, etc. In the proximate composition of radish leaves by varieties, there were no significant differences in the ash, protein, lipid, calcium and iron content of samples, but there were significant differences in the vitamins, chlorophyll and color value of samples. The quality characteristics on dried radish leaves by central composite design, it was significant value on the moisture content, chlorophyll and color value according to drying temperature and drying times. But there were no significant differences in the contents of calcium $(31.41{\sim}35.80\;mg/g,\;dry\;base)$ and iron $(0.21{\sim}0.29\;mg/g\;dry\;base)$. The multiplex regression coefficients analysis were calculated with independent variables $(X_1,\;X_2)$ and dependent variables (moisture, chlorophyll, color value). The calculated coefficient correlations for the each samples were $R^2>0.97$. The effects of drying temperature were greater than drying time in the total chlorophyll content changes of radish leaves. Based on the present study, the optimum drying condition for the lowest color changes and effective reduction of moisture of radish leaves were expected to be $5{\sim}6$ hours at $70^{\circ}C$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.255-264
• /
• 2022

The active ingredients of Napttegi Kong(GML, Glycine max landrace), a type of native rare soybeans, were identified, and an ultrasonic extraction method was introduced as an eco-friendly extraction method. Through the component analysis of the Napttegi Kong extract, the epicatechin, which was not found in conventional soybeans, was identified. For effective extraction using ultrasonic, the main extraction conditions were optimized using the response surface analysis method. Through the Box-Behnken design process, 15 experiments were conducted with the extraction temperature, the ratio of extraction solvent/solution, and extraction time as key independent variables. A quadratic regression equation for the two dependent variables, epicatechin content and total isoflavone content, was derived, and the coefficients of determination were found to be high as R² = 0.9939 and R² = 0.9844, respectively, confirming that the correlation showed high significance. The extraction conditions satisfying the maximum expectations of these two dependent variables were predicted. to be 40.4℃ of extraction temperature, 19.3 times of extraction solvent/solution, and 91 sec of extraction time. The expected value and the actual experimental value of the epikatechin content and the total isoflavone content were similar, so it was confirmed that this experimental method is a highly reliable optimization model.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.47-57
• /
• 2015

Purpose - The aim of this paper is to investigate the explanatory power of the Pecking-order theory (the cost of financing increases with asymmetric information) among Korean retail firms from the perspective of debt capacity. According to the Pecking-order theory, a firm's first preference is to use internal funds for its capital needs, its next preference is the issuance of debt, and its last preference is the issuance of equity; this is due to the information asymmetry problem between existing shareholders and investors. However, prior empirical studies, such as Lemmon and Zender (2010), argue that the entire sample test for the Pecking-order theory could be misleading due to the different levels of debt issuance capability of each of the individual firms; in fact, they confirm that the explanatory power of the Pecking-order theory improves after taking into account the differences in debt capacity of the U.S. firms they examined. This paper implements a case study approach among Korean retail firms to examine the relationship between debt capacity and the explanatory power of the Pecking-order theory in Korea. Research design, data, and methodology - This study uses the sample of public retail firms on the Korea Composite Stock Price Index (KOSPI) from the time period of 1990 to 2013. We gather related financial and accounting statements from the financial information firm WISEfn. Credit rating information is provided by the Korea Investor Service. We employ the models of Lemmon and Zender (2010) and Son and Kim (2013) to measure a firm's debt capacity. Their logit models use the rating dummy variable as a dependent variable and incorporate other firm characteristics as independent variables to estimate debt capacity. To test the Pecking-order theory, we adopt variants of the financing deficit model of Shyam-Sunder and Myers (1999). In the test of the Pecking-order theory, we consider all of the changes in total debt obligations, current debt obligations, and long-term debt obligations. Results - Our main contribution to the literature is our confirmation of the predicted relationship between debt capacity and the explanatory power of the Pecking-order theory among Korean retail firms. The coefficients on financing deficits become greater as a firm's debt capacity improves. This is consistent with the results of Lemmon and Zender (2010). The coefficients on the square of the financing deficits are also negative for the firms in the largest debt capacity group, which is also consistent with the predictions in prior literature. Conclusions - This study takes a case study approach by examining Korean retail firms. We confirm that the Pecking-order theory explains the capital structure of retail firms more appropriately, after taking into account the debt capacity of each firm. This result suggests the importance of debt capacity consideration in the testing of the Pecking-order theory. Our result also implies that there has been a potential underestimation of the explanatory power of the Pecking-order theory in existing studies.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.4
• /
• pp.265-271
• /
• 2001

In order to elucidate the influence of intestinal and hepatic first-pass effect on the pharmacokinetics of triflusal, the biotransformation of triflusal in the gastrointestinal tract and liver was designed. Moreover, we tried to establish an HPLC method applicable for bioassay and available to pharmacokinetics, not only with the simultaneous determination of triflusal and its active metabolite, 2-hydroxy-4-trifluoromethyl benzoic acid (HTB), but also with improving sensitivity. After the administration of triflusal (10 mg/kg) and HTB (10 mg/kg) into femoral vein, portal vein (only triflusal) and oral route (only triflusal), pharmacokinetic parameters were investigated from the plasma concentration-time profiles of triflusal and HTB in rats. An HPLC method was developed for the simultaneous determination of triflusal and HTB in rat plasma, urine and bile. The HPLC analysis was carried out using a C18 column and acetonitrile-methanol-water (25:10:65, v/v/v) as the mobile phase and UV detection at 234 nm. Furosemide was used as the internal standard. The calibration curves were linear over the concentration range $0.05-5.0\;{\mu}g/ml$ for triflusal and $0.2-200.0\;{\mu}g/ml$ for HTB with correlation coefficients greater than 0.999 and with intra-day or inter-day coefficients of variation not exceeding 10.0%. This assay procedure was applied to the study of metabolite pharmacokinetics of triflusal and HTB in rats. It was supposed that triflusal was almost metabolized in vivo because urinary and biliary excreted amounts of triflusal could be ignored as it was lower than 1.2% of the administered dose. According to the gastrointestinal and hepatic biotransformation pathways of triflusal, it was found that triflusal was hydrolyzed by about 5% in intestine and metabolized by about 53% in liver, and that the bioavailability of triflusal after oral administration of triflusal was 0.44, and also that the fraction of total elimination rate of triflusal which formed HTB in liver $(F_{mi},\;%)$ was about 98%. These results showed that triflusal was almost metabolized in liver, and the total elimination of triflusal in the body was dependent to the formation rate of HTB from triflusal in liver.

• Journal of Power System Engineering
• /
• v.17 no.3
• /
• pp.72-81
• /
• 2013

Many articles have been published about a 2-degree of freedom model that includes the lateral and yaw motions for controller synthesis in intelligent transport system applications. In this paper, a 3-degree of freedom linear model that includes the roll motion is developed to design a robust steering controller for lane following maneuvers using ${\mu}$-synthesis. This linear perturbed system includes a set of parametric uncertainties in cornering stiffness and unmodelled dynamics in steering actuators. The state-space model with parametric uncertainties is represented in linear fractional transformation form. Design purpose can be obtained by properly choosing the frequency dependent weighting functions. The objective of this study is to keep the tracking error and steering input energy small in the presence of variations of the cornering stiffness coefficients. Furthermore, good ride quality has to be achieved against these uncertainties. Frequency-domain analyses and time-domain numerical simulations are carried out in order to evaluate these performance specifications of a given vehicle system. Finally, the simulation results indicate that the proposed robust controller achieves good performance over a wide range of uncertainty for the given maneuvers.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.88.1-88.1
• /
• 2010

Organic dyes, because of their many advantages, such as high molar extinction coefficients, convenience of customized molecular design for desired photophysical and photochemical properties, inexpensiveness with no transition metals contained, and environment-friendliness, are suitable as photosensitizers for the Dye-sensitized Solar Cell (DSSC). The efficiency of DSSC based on metal-free organic dyes is known to be much lower than that of Ru dyes generally, but a high solar energy-to-electricity conversion efficiency of up to 8% in full sunlight has been achieved by Ito et al. using an indoline dye. This result suggests that smartly designed and synthesized metal-free organic dyes are also highly competitive candidates for photosensitizers of DSSCs with their advantages mentioned above. Recently, the performance of DSSC based on metal-free organic dyes has been remarkably improved by several groups. We had reported the novel organic dye with double electron acceptor chromophore, which was a new strategy to design an efficient photosensitizer for DSSC. To verify the strategy, we synthesized organic dyes whose geometries, electronic structures and optical properties were derived from preceding density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. In this paper, we successfully synthesized the chromophore containing multi-acceptor push-pull system from triphenylamine with thiophene moieties as a bridge unit. Organic dyes with a single electron acceptor and double acceptor system were also synthesized for comparison purposes. The photovoltaic performances of these dyes were compared, and the recombination dark current curves and the incident photon-to-current (IPCE) efficiencies were also measured in order to characterize the effects of the multi-anchoring groups on the open-circuit voltage and the short-circuit current. In order to match specifications required for practical applications to be implemented outdoors, light soaking and thermal stability tests of these DSSCs, performed under $100mWcm^{-2}$ and $60^{\circ}C$ for 1000h.

• Tribology and Lubricants
• /
• v.33 no.3
• /
• pp.98-105
• /
• 2017

A pin-on-disk test is performed to measure the wear volume of a ductile cast iron (DCI) roll when it wears down using a high carbon steel and two alloy steels at different sliding velocities between the roll and the material (steel). Normal pressure is set as constant and test temperatures are 400, 500 and $600^{\circ}C$. In addition, thermal softening behavior of the DCI roll is examined using a high-temperature micro-hardness tester and the surface hardness variation of the DCI roll is expressed in terms of temperature and heating time. Based on experimental data, a wear coefficient used in Archard's wear model for each material is obtained. The wear volume is clearly observed when the test temperature is $400^{\circ}C$ and sliding velocity varies. However, it is not measured at temperatures of $500^{\circ}C$ and $600^{\circ}C$ even with variations in sliding velocity. From the optical photographs of the pin and disk, the abrasive wear is observed at $400^{\circ}C$ clearly, but no at $500^{\circ}C$ and $600^{\circ}C$. At higher temperatures, the pin surface is not smooth and has many tiny caves distributed on it. It is found that wear volume is dependent on the carbon contents rather than alloy contents. Results also reveal that the variations of wear coefficients are almost linearly proportional to the carbon contents of the material.

• IE interfaces
• /
• v.13 no.3
• /
• pp.378-387
• /
• 2000

As the globalization of manufacturing companies continues, the scope of dependence between these companies and distributors, and other suppliers are growing very rapidly since no one company manufactures or distributes the whole product by themselves. And, the need to increase the efficiency of the whole supply chain is increasing. This paper deals with a multi-plant lot-sizing problem(MPLSP) which happens in a decentralized manufacturing system of a supply chain. In this study, we assume that the whole supply chain is driven by a single source of independent demand and many levels of dependent demands among manufacturing systems in the supply chain. We consider setup cost, transportation cost and time, and inventory holding cost as a decision factor in the MPLSP. The MPLSP is decomposed into two sub-problems: a planning problem of the whole supply chain and a lot-sizing problem of each manufacturing system. The supply chain planning problem becomes a pure linear programming problem and a Generalized Goal Decomposition method is used to solve the problem. Its result is used as a goal of the lot-sizing problem. The lot-sizing problem is solved using the CPLEX package, and then the coefficients of the planning problem are updated reflecting the lot-sizing solution. This procedure is repeated until termination criteria are met. The whole solution process is similar to Lagrangian relaxation method in the sense that the solutions are approaching the optimum in a recursive manner. Through experiments, the proposed closed-loop hierarchical planning and traditional hierarchical planning are compared to optimal solution, and it is shown that the proposed method is a very viable alternative for solving production planning problems of decentralized manufacturing systems and in other areas.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.25-36
• /
• 2016

The purpose of this study is to construct a quantitative evaluation method that can analyze the policy effectiveness with the construction of a implicit composite index incorporating spatial econometrics models. In order to propose a methodological framework for the program evaluation, this study conducts an empirical analysis with the application of the Comprehensive Rural Village Development Project (CRVDP) which explicitly claims to achieve comprehensive goal of community development. The present study pays particular attention to quantifying the composite evaluation index and drawing net effect through the application of a series of spatial econometrics models. The spatial unit of the analysis is drawn at Eup-Myeon level in rural areas in Korea, and the time horizon is in between 2005 and 2010. We utilize the Korean Agricultural Census data in 2005 and 2010. Three steps of methodological processes are needed to satisfy the objective of the present study. First, we apply factor analysis to construct the composite index that represents comprehensive settlement environment in rural area. The index should be matched with the main objective of the CRVDP. Second, we apply the derived index to a series of spatial econometrics model as dependent variable. Lastly, utilizing the estimated coefficients of the econometrics models, we apply decomposition technique to estimate CRVDP's net effect from both cross-sectional and longitudinal perspectives. We find that the results of the decomposition analysis by the execution of the CRVDP are positively associated with the explicit object of the project.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2006.04a
• /
• pp.55-56
• /
• 2006

This thesis describes the use of measured aerosol size distributions and size-resolved hygroscopic growth to examine the physical and chemical properties of several particle classes. The primary objective of this work was to investigate the optical and cloud forming properties of a range of ambient aerosol types measured in a number of different locations. The tool used for most of these analyses is a differential mobility analyzer / tandem differential mobility analyzer (DMA / TDMA) system developed in our research group. To collect the data described in two of the chapters of this thesis, an aircraft-based version of the DMA / TDMA was deployed to Japan and California. The data described in two other chapters were conveniently collected during a period when the aerosol of interest came to us. The unique aspect of this analysis is the use of these data to isolate the size distributions of distinct aerosol types in order to quantify their optical and cloud forming properties. I used collected data during the Asian Aerosol Characterization Experiment (ACE-Asia) to examine the composition and homogeneity of a complex aerosol generated in the deserts and urban regions of China and other Asian countries. An aircraft-based tandem differential mobility analyzer was used for the first time during this campaign to examine the size-resolved hygroscopic properties of particles having diameters between 40 and 586 nm. Asian Dust Above Monterey (ADAM-2003) study was designed both to evaluate the degree to which models can predict the long-range transport of Asian dust, and to examine the physical and optical properties of that aged dust upon reaching the California coast. Aerosol size distributions and hygroscopic growth are measured in College Station, TX to investigate the cloud nucleating and optical properties of a biomass burning aerosol generated from fires on the Yucatan Peninsula. Measured aerosol size distributions and size-resolved hygroscopicity and volatility were used to infer critical supersaturation distributions of the distinct particle types that were observed during this period. The predicted CCN concentrations were used in a cloud model to determine the impact of the different aerosol types on the expected cloud droplet concentration. RH-dependent aerosol extinction coefficients are calculated at a wavelength of 550 nm.