• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.3
• /
• pp.233-238
• /
• 2001

This paper deals with demand forecasting of parts in an automobile model which has been extinct. It is important to estimate how much inventory of each part in the extinct model should be stocked because production lines of some parts may be replaced by new ones although there is still demands for the model. Furthermore, in some countries, there is a strong regulation that the automobile manufacturing company should provide customers with auto parts for several years whenever they are requested. The major characteristic of automobile parts demand forecasting is that there exists a close correlation between the number of running cars and the demand of each part. In this sense, the total demand of each part in a year is determined by two factors, the total number of running cars in that year and the failure rate of the part. The total number of running cars in year k can be estimated sequentially by the amount of shipped cars and proportion of discarded cars in years 1, 2,$\cdots$, i. However, it is very difficult to estimate the failure rate of each part because available inter-failure time data is not complete. The failure rate is, therefore, determined so as to minimize the mean squared error between the estimated demand and the observed demand of a part in years 1, 2,$\cdots$, i. In this paper, data obtained from a Korean automobile manufacturing company are used to illustrate our model.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.229-251
• /
• 2012

Guided waves have shown a great potential for structural health monitoring (SHM) applications. In contrast to traditional non-destructive testing (NDT) methodologies, a key element of SHM approaches is the high process of automation. The monitoring system should decide autonomously whether the host structure is intact or not. A basic requirement for the realization of such a system is that the sensors are permanently installed on the host structure. Thus, baseline measurements become available that can be used for diagnostic purposes, i.e., damage detection, localization, etc. This paper contributes to guided wave-based inspection in anisotropic materials for SHM purposes. Therefore, computational strategies are described for both, the solution of the complex equations for wave propagation analysis in composite materials based on exact elasticity theory and the popular global matrix method, as well as the underlying equations of two active damage localization algorithms for anisotropic structures. The result of the global matrix method is an angular and frequency dependent wave velocity characteristic that is used subsequently in the localization procedures. Numerical simulations and experimental investigations through time-delay measurements are carried out in order to validate the proposed theoretical model. An exemplary case study including the calculation of dispersion curves and damage localization is conducted on an exemplary unidirectional composite structure where the ultrasonic signals processed in the localization step are simulated with the spectral element method. The proposed study demonstrates the capabilities of the proposed algorithms for accurate damage localization in anisotropic structures.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.681-686
• /
• 2010

Although the height of a ramp is an important design element, it has not been considered in prior studies. Therefore, in this study, the ramp slope and height are considered as independent variables. To analyze the effects of the slope and height, five levels of slope (1:6, 1:8, 1:10, 1:12 and 1:14) and three levels of height (15cm, 30cm and 45cm) are considered. For the dependent variables, the total time, velocity and perceived discomfort were considered as usability measures, pulse rate changes and EMG signals of four related muscles (extensor carpi radialis, triceps brachii, anterior deltoid and posterior deltoid) were considered as physiology measures. As a result, differences among usability and physiological characteristic for the five slopes increased as the height increased. Additionally, slope effects were minor when the height was low (15cm). Almost domestic/international regulations and guidelines related to ramp recommended 1:12 slope for the ramp design, however, there was no significant difference between 1:10 and 1:12 according to result of this study. In addition, slope effects were minor at a low height; thus, a slope of 1:8 can be recommended if the installation space for a gentler ramp is not sufficient.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.231-236
• /
• 2014

With the development of industry these days, the demand for electric power increases and the larger capacity for power transfer is required. The scales of facilities should become larger; and the relative systems are required to operate with a higher degree of reliability. Therefore, stabilization of electric power systems is an important issue. The high degree of reliability required in the process of production and supply of electric power is an essential part of industrial society. Accident such as blackouts causes a hugh amount of economic losses to the high-tech industrial society dependent upon electric power. In this paper, in order to determine a stable operation of high-voltage power cable, used as a unique means of delivering electric power generated at a power station, we figure out the time rate of change of insulation resistance following a decay accelerating factor Arrhenius equation. With the data from the insulation resistance, we can determine the lifetime of power cable in operation.

• Biomedical Science Letters
• /
• v.21 no.3
• /
• pp.152-159
• /
• 2015

Der p 2, which is a major allergen of house dust mite, plays an important role in the pathogenesis of allergic disease. There is controversy regarding whether Der p 2 binds to Toll-like receptor 4 (TLR4), and its inflammatory effect has not yet been elucidated. In the current study, we examined the interaction of Der p 2 with TLR4 and the effect of Der p 2 on cytokine release in THP-1 cells and lymphocytes. Among house dust mite extracts, recombinant TLR4 protein interacted with Der p 2. The overall structure of Der p 2 is characteristic of the immunoglobulin superfamily and contains ten ${\beta}-strands$, forming a ${\beta}-cup$ fold with two anti-parallel ${\beta}-sheets$, and a short 310 helix. The two sheets can be separated, further allowing the formation of a large internal pocket, which is narrow and suitable for binding large flat molecules such as lipid-like molecules. Der p 2 caused increased secretion of IL-6, IL-8, and MCP-1, which are neutrophil survival factors, in human monocytic THP-1 cells in a time-dependent manner. Der p 2 also induces the release of cytokines in normal and allergic lymphocytes. Supernatant after treatment with Der p 2 inhibited neutrophil apoptosis. In coculture of lymphocytes with neutrophils, Der p 2 inhibited spontaneous apoptosis of allergic neutrophils. In summary, Der p 2 binds to TLR4 and induces an inflammatory response such as cytokine secretion in immune cells. These findings may enable elucidation of allergy pathogenesis by specific allergen of house dust mite.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.516-524
• /
• 1997

The propagation properties of various pulse signal types(square pulse, Gaussian pulse, trapezoid pulse, RF pulse) on coupled microstrip lines are investigated. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. Frequency-dependent characteristics of coupled microstrip line is obtained using Jansen's approximate equation. The propagation properties of pulse signal on coupled microstrip lines is analyzed regarding to its geometric structure (relative permittivity ${varepsilon}_r$ substrate height h, strip width w of the microstrip line) and pulse width ${\tau}$ of signal pulse. The simulation results show that space between two lines is very significant parameter in pulse distortion in comparison of any other parameters. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.90-96
• /
• 2002

A novel methodology on the calculations of osmotic pressure and gradient diffusion coefficient has been provided ill the present study, by applying a succinct numerical analysis on the experimental results. Although both the osmotic pressure and the gradient diffusion coefficient represent a fundamental characteristic in related membrane filtrations such as microfiltration and ultrafiltration, neither theoretical analysis nor experiments can readily determine them. The osmotic pressure of colloidal suspension has been successfully determined from a relationship between the data of the time-dependent permeate flux, their numerical accumulations, and their numerical derivatives. It is obvious that the osmotic pressure is gradually increased, as the particle concentration increases. The thermodynamic coefficient was calculated from the numerical differentiation of the correlation equation of osmotic pressure, and the hydrodynamic coefficient was evaluated from the previously developed relation for an ordered system. Finally, the estimated gradient diffusion coefficient, which entirely depends on the particle concentration, was compared to the previous results obtained from the statistical mechanical simulations.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.231-243
• /
• 2015

Four different paddy soils collected around the Gyeongju nuclear site were treated with $^{99}TcO_4{^-}$ solution under the assumption of two contrasting contamination scenarios. Scenario I (SN-I) is for a pre-transplanting deposition of $^{99}Tc$ followed by plowing, whereas SN-II is for its deposition onto the water surface shortly after transplanting. Rice plants were grown in lysimeters in a greenhouse. Plant uptake of $^{99}Tc$ was quantified with the $TF_{area}$ ($m^2{\cdot}kg^{-1}-dry$). The SN-II $TF_{area}$ values for straws and brown rice, having been generally higher than the SN-I values, were within the ranges of $6.9{\times}10^{-3}{\sim}4.1{\times}10^{-2}$ and $5.2{\times}10^{-6}{\sim}7.3{\times}10^{-5}$, respectively. Sorption onto clay seems to have decreased $^{99}Tc$ uptake in SN-I, whereas it may have had an insignificant effect in SN-II. A phenomenon characteristic of submerged paddy soil, i.e., the development of a thin oxic surface layer may have greatly affected the rice uptake of SN-II $^{99}Tc$. The surface-water concentrations of $^{99}Tc$ were much higher in SN-II than in SN-I. For the percolating water, however, the opposite was generally true. At most 1.3% of the applied $^{99}Tc$ were leached through such percolation. The use of empirical deposition time-dependent $TF_{area}$ values was considered desirable in assessing the radiological impact of a growing-season deposition of $^{99}Tc$ onto paddy fields.

• Structural Engineering and Mechanics
• /
• v.42 no.4
• /
• pp.507-530
• /
• 2012

Age-related problems especially corrosion and fatigue are normally suffered by weatherworn ships and aging offshore structures. The effect of corrosion is one of the important factors in the Common Structural Rule (CSR) guideline of the ship design based on a 20 or 25 years design life. The aim of this research is the clarification of the corrosion effect on ultimate strength of stiffened panels on various types of double hull oil tankers. In the case of ships, corrosion is a phenomenon caused by the ambient environment and it has different characteristics depending on the parts involved. Extensive research considering these characteristic have already done by previous researchers. Based on this data, the ultimate strength behavior of stiffened panels for four double hull oil tankers such as VLCC, Suezmax, Aframax, and Panamax classes are compared and analyzed. By considering hogging and sagging bending moments, the stiffened panels of the deck, inner bottom and outer bottom located far away from neutral axis of ship are assessed. The results of this paper will be useful in evaluating the ultimate strength of an oil tanker subjected to corrosion. These results will be an informative example to check the effect of ultimate strength of a stiffened panel according to corrosion addition from CSR for a given type of ship.

• The Korean Journal of Physiology and Pharmacology
• /
• v.11 no.6
• /
• pp.263-267
• /
• 2007

We have previously demonstrated that the level of leukocytes and neutrophils significantly increased immediately and 30 min after exercise. Interleukin-8 (IL-8) is an inflammatory cytokine that acts as a chemokine on neutrophils. In the present study, we evaluated the correlation between the number of neutrophils and leukocytes, and between the number of neutrophils and plasma IL-8 level. Long-distance trained runners (TRs, n = 10) and untrained sedentary control subjects (SEDs, n = 10) ran for one hour at 70% of heart rate reserve. In the TR, the number of neutrophils correlated significantly with the number of leukocytes in the blood. However, there was no correlation between the number of neutrophils and the plasma IL-8 concentration in both groups. Expressions of IL-8 protein and mRNA were markedly higher in the TRs as compared to the SEDs at three time intervals (pre-exercise, immediately after exercise, and post exercise). In conclusion, our results show that 1) the neutrophil level was dependent on the level of leukocytes 2) there was no correlation between the neutrophils count and plasma IL-8 concentration and 3) a higher plasma IL-8 level in athletes may be a unique characteristic of intensive training.