• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.69-72
• /
• 2000

Multilevel modulation schemes are known to be highly bandwidth efficient. By varying modulation level adaptively according to channel conditions (i.e. adaptive QAM schemes or AQAM), high bandwidth efficiency can be achieved. This paper considers the effect of time delay on the adaptive QAM schemes in dispersive fading channels. In order to undertake investigations effectively, a simulator has been developed. The simulation results show that the BER performance obtained for the wideband channel with a delay spread of 0.75 $\mu$sec is better than 10$^{-4}$ with a SNR value of 40 ㏈ and ABPS is found to be approximately 5.5.

• Smart Structures and Systems
• /
• v.25 no.6
• /
• pp.719-732
• /
• 2020

Real-time hybrid simulation (RTHS) which combines physical experiment with numerical simulation is an advanced method to investigate dynamic responses of structures subjected to earthquake excitation. The desired displacement computed from the numerical substructure is applied to the experimental substructure by a servo-hydraulic actuator in real time. However, the magnitude decay and phase delay resulted from the dynamics of the servo-hydraulic system affect the accuracy and stability of a RTHS. In this study, a robust stability analysis procedure for a general single-degree-of-freedom structure is proposed which considers the uncertainty of servo-hydraulic system dynamics. For discussion purposes, the experimental substructure is a portion of the entire structure in terms of a ratio of stiffness, mass, and damping, respectively. The dynamics of the servo-hydraulic system is represented by a multiplicative uncertainty model which is based on a nominal system and a weight function. The nominal system can be obtained by conducting system identification prior to the RTHS. A first-order weight function formulation is proposed which needs to cover the worst possible uncertainty envelope over the frequency range of interest. Then, the Nyquist plot of the perturbed system is adopted to determine the robust stability margin of the RTHS. In addition, three common delay compensation methods are applied to the RTHS loop to investigate the effect of delay compensation on the robust stability. Numerical simulation and experimental validation results indicate that the proposed procedure is able to obtain a robust stability margin in terms of mass, damping, and stiffness ratio which provides a simple and conservative approach to assess the stability of a RTHS before it is conducted.

• Journal of the Korean Society of Combustion
• /
• v.18 no.2
• /
• pp.32-41
• /
• 2013

This study presents both experimental and numerical investigation of ignition delay time of n-heptane and n-butanol binary fuel. The $O_2$ concentration in the mixture was set to 9-10% to make high exhaust gas recirculation( EGR) rate condition which leads low NOx and soot emission. Experiments were performed using a rapid compression machine(RCM) at compressed pressure 20bar, several compressed temperature and three equivalence ratios(0.4, 1.0, 1.5). In addition, a numerical study on the ignition delay time was performed using CHEMKIN codes to validate experimental results and predict chemical species in the combustion process. The results showed that the ignition delay time increased with increasing the n-butanol fraction due to a decrease of oxidation of n-heptane at the low temperature. Moreover, all of the binary fuel mixtures showed the combustion characteristics of n-heptane such as cool flame mode at low temperature and negative-temperature-coefficient(NTC) behavior. Due to the effect of high EGR rate condition, the operating region is reduced at lean condition and the ignition delay time sharply increased compared with no EGR condition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.30-44
• /
• 2020

The application of PPLT is difficult to analyze and judge only from the effects of the delay time. In this study, the application of PPLT was proposed using not only the delay time of PLT and PPLT due to the change in traffic volume and the number of opposite straight lanes but also the traffic volume of passing a left turn and the number of conflict risks as indicators. According to the analysis, the more left-turn traffic than capacity and the less opposite-straight volume, the greater the PPLT effect. On the other hand, if the left-turn traffic is below capacity, the delay time will be reduced partially, but the overall passing left turn volume will not increase, and the conflict risk will increase. In addition, the conflict risk increases in the third lane or higher. Moreover, the difference of passing left-turn volume between PLT and PPLT showed a pattern similar to the delay time difference, and the PPLT coverage was wider than the difference in delay time and was associated more with the conflict risk numbers. Therefore, it would be reasonable to use passing left-turn traffic primarily, consider the delay time below the left-turn capacity, and consider the conflicting risk numbers simultaneously at or above the opposite straight three lanes.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.113-118
• /
• 2010

Purpose: Prolonged stay in the emergency department (ED), which is closely related with the time interval from the ED visit to a decision to admit, might be associated with poor outcomes for trauma patients and with overcrowding of the ED. Therefore, we examined the factors affecting the delay in the decision to admit severe trauma patients. Also, a multidisciplinary department system was preliminarily evaluated to see if it could reduce the time from triage to the admission decision. Methods: A retrospective observational study was conducted at a tertiary care university hospital without a specialized trauma team or specialized trauma surgeons from January 2009 to March 2010. Severe trauma patients with an International Classification of Disease Based Injury Severity Score (ICISS) below 0.9 were included. A multivariable logistic regression analysis was used to find independent variables associated with a delay in the decision for admission which was defined as the time interval between ED arrival and admission decision exceeded 4 hours. We also simulated the time from triage to the decision for admission by a multidisciplinary department system. Results: A total of 89 patients were enrolled. The average time from triage to the admission decision was $5.2{\pm}7.1$ hours and the average length of the ED stay was $9.0{\pm}11.5$ hours. The rate of decision delay for admission was 31.5%. A multivariable regression analysis revealed that multiple trauma (odds ratio [OR]: 30.6, 95%; confidence interval [CI]: 3.18-294.71), emergency operation (OR: 0.55, 95%; CI: 0.01-0.96), and treatment in the Department of Neurosurgery (OR: 0.07, 95%; CI: 0.01-0.78) were significantly associated with the decision delay. In a simulation based on a multidisciplinary department system, the virtual time from triage to admission decision was $2.1{\pm}1.5$ hours. Conclusion: In the ED, patients with severe trauma, multiple trauma was a significant factor causing a delay in the admission decision. On the other hand, emergency operation and treatment in Department of Neurosurgery were negatively associated with the delay. The simulated time from triage to the decision for admission by a multidisciplinary department system was 3 hours shorter than the real one.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.565-573
• /
• 2004

In this paper, we proposed a heart activity control model for simulation of the aortic sinus baroreceptor, which was the most representative baroreceptor sensing the variance of pressure in the cardiovascular system. And then, the heart activity control model composed electric circuit model of the cardiovascular system with baroreflex control and time delay sub-model to observe the effect of time delay in heart period and stroke volume under the regulation of baroreflex in the aortic sinus. The mechanism of time delay in the heart activity baroreflex control model is as follows. A control function is conduct sensing pressure information in the aortic sinus baroreceptor to transmit the efferent nerve through central nervous system. As simulation results of the proposed model, we observed three patterns of the cardiovascular system variability by the time delay. First of all, if the time delay over 2.5 second, aortic pressure and stroke volume and heart rate was observed non-periodically and irregularly. However, if the time delay from 0.1 second to 0.25 second, the regular oscillation was observed. And then, if time delay under 0.1 second, then heart rate and aortic pressure-heart rate trajectory were maintained in stable state.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.17-21
• /
• 2010

The chemistry and ignition delay of hydrogen/air/HFP premixed mixtures was investigated numerically with unsteady perfectly stirred reactor(PSR). The detailed chemistry of 93 species and 817 reaction mechanism was introduced for hydrogen/air/HFP mixtures. The results shows the temporal concentration variations of major or reactants such as hydrogen and oxygen during autoignition were similar to the spatial distribution of premixed flame while water vapor produced at the ignition temperature was decomposed later, which can be clarified with the relate species production rates that the the re-growth (or shoulder) of OH concentration is a result of F radicals attacking $H_20$ forming OH and HF. For the stoichiometric $H_2$/air mixture inhibited by 20% HFP, HFP thermal decomposition reaction prevails over the radical attack such as H at initial stage. Even though relatively large HFP addition contributes to delay the ignition, chemical effect on the ignition delay is not effective because of late thermal decomposition of HFP. The most small ignition delay was observed at a slightly fuel lean condition ($\phi$ = 0.9), and temperature dependency of ignition delay was clearly shown near 900 K.

• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.33-36
• /
• 2001

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.692-699
• /
• 2000

We build and analyze some types of queueing model to discuss capacity dimensioning of access links of a LAN interworking unit connected to the Internet backbone network. We assume that the IWU has a FIFO buffer to transmit IP packets to the Internet through the backbone. In order to analyze the system, we use a Poisson process and an MMPP process as input traffic models of IP packets and we use a general service time distribution as a service time model. But we use both an exponential service time and a deterministic service time in numerical examples for simple and efficient performance comparisons. As performance measures, we obtain the packet loss probability and the mean packet delay. We present some numerical results to show the effect of arrival rate, buffer size and link capacity on packet loss and mean delay.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.209-219
• /
• 1996

Fieldbus provides a real-time data communication among field devices in the process control and manufacturing automation systems. In this paper, a Petri Net model of the 1993 draft of IEC/ISA fieldbus which is proposed as an international standard of fieldbus network is developed. Based on the Petri Net model, discrete-event simulation model of IEC/ISA fieldbus network is developed. This paper evaluates the network induced delay in the data link layer of IEC/ISA fieldbus using the simulation model. In addition, an integrated discrete-event/continuous-time simulation model of fieldbus system and distributed control system is developed. This paper investigates the real-time data processing capability of IEC/ISA fieldbus and the effect of network-induced delay to the performance of control system.