• ETRI Journal
• /
• v.28 no.5
• /
• pp.684-687
• /
• 2006

In this letter, we evaluate the system performance of a space-time block coded (STBC) multicarrier (MC) DS-CDMA system over a time selective fading channel, with imperfect channel knowledge. The average bit error rate impairment due to imperfect channel information is investigated by taking into account the effect of the STBC position. We consider two schemes: STBC after spreading and STBC before spreading in the MC DS-CDMA system. In the scheme with STBC after spreading, STBC is performed at the chip level; in the scheme with STBC before spreading, STBC is performed at the symbol level. We found that these two schemes have various channel estimation errors, and that the system with STBC before spreading is more sensitive to channel estimation than the system with STBC after spreading. Furthermore, derived results prove that a high spreading factor (SF) in the MC DS-CDMA system with STBC before spreading leads to high channel estimation error, whereas for a system with STBC after spreading this statement is not true.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.233-233
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.133-140
• /
• 2005

This paper presents a rapid face shape acquisition system. The system is composed of two cameras and one projector. The technique works by projecting a pattern on the object and capturing two images with two cameras. We use a 'one shot' system which provides 3D data acquired by single image per camera. The system is good for rapid data acquisition as our purpose. We use the 'absolutely coded pattern' using the hue and saturation of pattern lines. In this 'absolutely coded pattern' all patterns have absolute identification numbers. We solve the correspondence problem between the two images by using epipolar geometry and absolute identification numbers. In comparison to the 'relatively coded pattern' which uses relative identification numbers, the 'absolutely coded pattern' helps obtain rapid 3D data by one to one point matching on an epipolar line. Because we use two cameras, we obtain two images which have similar hue and saturation. This enables us to have the same absolute identification numbers in both images, and we can use the absolutely coded pattern for solving the correspondence problem. The proposed technique is applied to face data and the total time for shape acquisition is estimated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.423-430
• /
• 2010

The performances of turbo-coded space-time block coding (STBC) schemes are subject to how soft decision detection (SDD) information are generated from the STBC decoder. For this reason, we have to pay particular attention to estimation of SDD. In this paper, we evaluate the performance of a turbo coded STBC scheme depending on the accuracy of the SDD. Recently, a new quasi orthogonal STBC (QO-STBC) scheme using a noise whitened filter was proposed in order to reduce noise enhancing effect of zero forcing detection process. This QO-STBC scheme was proven to be efficient in computational complexity compared to the other conventional QO-STBC schemes. In this paper, we first present detailed mathematical analysis on the noise whitened QO-STBC scheme, and by using the result we propose the optimum SDD method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.34-39
• /
• 2008

In this paper, we propose a bit-interleaved coded modulation (BICM) a lied to improved super-orthogonal space-time block code(SOSTBC). The proposed system achieves a greater diversity gain than that of super-orthogonal space-time trellis code (SOSTTC) with similar decoding complexity. Since, using the improved SOSTBC, the bit diversity carl be full diversity of SOSTBC. In contrast, BICM applied to Jafarkhani's SOSTBC is difficult to achieve a greater diversity gain than that of SOSTTC, because every bit diversity of the system is 1.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.644-651
• /
• 2007

In multiple antenna systems, vertical Bell Labs Layered Space-Time (V-BLAST) systems enable very high throughput by nulling and cancelling at each layer detection. In this paper, we propose a V-BLAST system which combines with signal space diversity technique. The benefit of the signal space diversity is that we can obtain an additional gain without extra bandwidth and power expansion by applying inphase/quadrature interleaving and the constellation rotation. Through simulation results, it is shown that the performance of the proposed system is less than 0.5dB away from the ideal upper bound.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.43-46
• /
• 2004

In this paper, we present a carrier phase estimation algorithm for LDPC coded systems. LDPC coded system can not achieve the ideal performance if phase offset is introduced by channel. However, the estimation of phase offset is very hard since the operating point of LDPC is very low SNR. To solve this problem, the algorithm using the tentative soft decision value and based on Maximum Likelihood (ML), was proposed in [2]. But this algorithm has problem which works only under constant phase offset. If phase offset is time variant, it has a severe degradation in performance. To solve this problem. we propose two types of estimators. symbol by symbol estimator: Unidirectional estimator (UDE) and hi-directional estimator (BDE), and sub-block estimator (SBE).

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.141-149
• /
• 2003

In this paper, we investigate design criteria and the performance of the space-frequency bit-interleaved coded modulation (SF-BICM) systems in frequency-selective Rayleigh fading channels. To determine the key parameters that affect the performance of SF-BICM, we derive the pairwise error probability (PEP) in terms of the determinant of the matrix corresponding to any two codewords. We prove that the bit-interleavers do the function of distributing the nonzero bits uniformly such that two or more nonzero bits are seldom distributed into the symbols that are transmitted in the same frequency bin. This implies that the bit-interleavers transform an SF-BICM system into an equivalent 1-antenna system. Based on this, we present design criteria of SFBICM systems that maximizes the diversity order and the coding gain. Then, we analyze the performance of SF-BICM for the case of 2-transmit antennas and 2-multipaths by deriving a frame error rate (FER) bound. The derived bound is accurate and requires only the distance spectrum of the constituent codes of SF-BICM. Numerical results reveal that the bound is tight enough to estimate the performance of SF-BICM very accurately.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.24-29
• /
• 2011

Comparing conventional one-way relaying, two-way relaying scheme with network coding can achieve high throughput by reducing the transmission time. Coded cooperation protocol, which is a algorithm that uses coding on physical layer, can achieve high reliability. In this paper, we propose coded cooperation protocol over two-way relay network. Simulation results show proposed protocol has better performance in terms of reliability and throughput compare with conventional amplify and forward protocol. Also, with same throughput, proposed protocol has better performance in terms of reliability compare with the conventional hybrid decoded and forward protocol.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.727-729
• /
• 2002

In this paper, we proposed quad variable rates ADPCM coding method and its implementation on C6000 DSP, which is modified from the standard ADPCM of ITU G.726 for speech quality improvement considering the environmental noise Four coding rates, 16Kbps, 24Kbps, 32Kbps and 40Kbps are used for speech window samples and the rate decision threshold is decided by the environmental noise level. The object of the proposed method is to reduce the coding rate while retaining the speech quality and the speech quality is considerably close to 40Kbps single rate coder with the coding rate close to 16Kbps single rate coder under the environmental noise. The environmental noise level affects the coding rate and the noise level is calculated per every speech window samples. At high noise level, more samples are coded at higher rates to enhance the quality, but at low noise level, only the big speech signals are coded at higher rates and more speech samples are coded at lower coding rates to reduce the coding rates. The influence of the noise on tile speech signal is considerably high for small signals and the small signal has the higher ZCR (zero crossing rate). The method is simulated in PC and to be implemented on C6000 floating point DSP board in real time operations.