• Journal of the Korean Geosynthetics Society
• /
• v.9 no.3
• /
• pp.87-93
• /
• 2010

The change of water level in reservoirs is an important factor causing failure of bank slopes, i.e. landslide. The water level of Three Gorges reservoir in China fluctuate between 145 m and 175 m, as a matter of flood control. During its normal operational state, the rate of water level fluctuation is supposed to range from 0.67 m/d to 3.0 m/d. Majiagou slope is located on the left bank of Zhaxi River, 2.1 km up from the outlet. Zhaxi River is a tributary of the Yangtze River within the Three Gorges area, of which the water level changes with the reservoir. At the back of Majiagou slope, a 20 m long and 3~10 cm wide fissure developed just after the reservoir water level rose from 95 m to 135 m in 2003. This big fissure was a full suggestion of potential failure of this slope. In this study, the pore water pressure files obtained from seepage analysis were used to evaluate the change in factor of safety (FS) with reservoir water level. Slope stability analyses then were carried out, with fully specified slip surface and limit equilibrium method. In the limit equilibrium analysis, the contribution of negative pore water pressure to shear strength was considered by the use of Fredlund's shear strength equation for unsaturated soils. On the base of the analyses, the change of FS with reservoir water level was interpreted in detail. It was found that FS against bank slopes decreases with the rise of the reservoir water level and increases with the drawdown of the reservoir water level. The most dangerous state was when the reservoir water level stays at the highest for a long time.

• Journal of Korean Academy of Nursing
• /
• v.26 no.3
• /
• pp.591-604
• /
• 1996

The surgical hand scrub (SHS) is the single most important procedure in the prevention of post-operative wound infections and yet it remains the most violated of all infection control procedures. The purpose of this study was to gain an overview of SHS habits in operative th atre personnel and to determine knowledge and attitudes to identify whether there is a need for improvement. The subjects for this study included 79 doctors and 94 nurses working in the operative th atres of four hospitals in Incheon City and Kyungki Province. Related data were collected from July 25 to August 10, 1995 by the author. The data were analyzed using descriptive stat-istics and Chi-squre test. The results of the study are summarized as follows : 1. Nurses felt that they conducted SHS for a longer period of time than doctors did(X=20.1, P=.005). 2. Nurses and doctors had some knowledge of slip-ping rings off fingers and the length of nails, but they lacked knowledge on the duration of SHS, handwashing after an operation and on manicure. 3. There were many reasons given for insufficient SHS included : 1) because they were so busy (38%). 2) brushes were too harsh(19.7%). 3) operations were very simple(18.7%). 4) surgical latex gloves provide functional barrier(11.6%). 5) SHSs were troublesome(7.4%) 6) there were no clocks near the sinks(2.5%) and 7) the operative patients were administered antibiotics after operartion(2.1%). 4. Most of nurses and doctors considered SHS to be important in prevention against post operative infections. 5. Nurses were found to do a thorough SHS, but residents were found to neglect SHS. 6. Considering prevention against postoperative infections, most nurses and doctors considered aseptic techniques, environment-sanitary management and SHS more important than the use of antibiotics, the resistance of patients or the method of operation. 7. Half of the nurses and doctors(54.3%) considered surgical latex gloves to function well as a barrier. 8. Half of the nurses (56.4%) and doctors(51.9%) learned SHS as part of the curriculum in their school education and the rest(nurses : 95.7%, doctors : 74.7%) learned SHS as part of their In Service Education. In conclusion, these findings suggest a need to develop an educational program on surgical hand scrub and hospital infection control for surgical personnels, to install clocks near the hand scrub sinks, to consider a violation report for negligent surgical hand scrubs, and to develop a soft brush for hand scrubs in order to increase performance of the surgical hand scrub.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.39-52
• /
• 2013

The shear stress characteristics of landslide materials can be affected by various factors. We examined the shear stress characteristics of two different soils using ring-shear apparatus, in which saturation-consolidation-shearing speed can be easily controlled. This paper presents (i) shear stress-time characteristics, (ii) shear stress depending on normal stress and shear speed and (iii) shear stress as a function of shearing speed. Materials used in this paper were the Nakdong River sand and muds taken from Jinhae coastal area in Korea. Samples were prepared in three types: Sand (upper)-Sand (lower), Clay (upper)-Clay (lower) and Sand (upper)-Clay (lower). The upper and lower indicate the samples placed in upper and lower ring shear boxes, respectively. For given normal stresses (50 and 100 kPa) and shearing speed (0.1 mm/sec), we performed ring shear tests. Then the failure lines were determined in the second test. Last, we determined the shear stress characteristics depending on different shearing speeds, such as 0.01, 0.1, 1, 10, 100 mm/sec. As a result, we found that shear stress characteristics are strongly dependent on above three factors. The shear stress of Sand (upper)-Clay (lower) is smaller than that of Sand (upper)-Sand (lower), but slightly larger than that of Clay (upper)-Clay (lower). The shear stress is also characterized by grain crushing and wetting process at slip surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.595-608
• /
• 2013

This paper is proposed the computation method of moored ship motion considering harbor resonance, and estimated that the harbor resonance have an effect on moored ship motion. The computation of harbor resonance was used CGWAVE model and the computation of moored sip motion was used the Green function method expressed by three dimensions. This method was verified with the field observation data of moored ship motion, and the application of actual harbor was investigated with wave field data and down time record data in Pohang New Harbor. The resonance periods in Pohang New Harbor that obtained from wave field data were 80, 33, 23, 8 minute, which are the long waves, and 42, 54, 60 second, which are the infra-gravity waves inside harbor slip. The simulated results of harbor resonance were corresponded with the wave field data. This study was investigated on 5,000 ton, 10,000 ton and 30,000 ton ship sized in Pier 8 of Pohang New Harbor that the harbor resonance has effect on moored ship motion from simulated results of ship motion in case of included resonance and excluded resonance. In case of included resonance, the ship motion have increased by 12~400 percent when compared with results of excluded resonance. We could find that the harbor resonance have still more an effect on the surge and heave motions of a large size ship and the roll and yaw motions of a small size ship.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.425-431
• /
• 2015

LNG (liquefied natural gas) is considered the best alternative eco-fuel, and many studies on the LNG fuel system have been performed to use LNG as the fuel for ships. For the LNG fuel supply system, natural gas transfers from the vaporizer to the engine in the gaseous state with a temperature of $50^{\circ}C$ and a pressure of 35MPa. Therefore, a structural safety evaluation of the double-walled pipelines considering thermal load is essential. In this article, an uniaxial tensile test for super duplex stainless steel, material for double-walled pipe, according to the annealing time was carried out to analyze the thermal effect. In addition, thermo-structural analysis of the high temperature-high pressure double-walled pipe with fixed supports that are now used widely was carried out to evaluate the structural safety. To minimize stress concentration of the connection point between the support and inner pipe, the shapes of the new type support that can slip through inner pipe were proposed, and the supports which has best structural performance was selected using the results from the thermo-structural analyses of new supports and an analysis of the whole double-walled pipeline was performed to ensure structural safety. These results can be used as a database for the design of double-walled pipelines and sliding support.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.2
• /
• pp.57-72
• /
• 2002

Students spend most of their time in school. Schools have the possibility of unanticipated accidents, however, and the rate of accidents in schools is increasing. The purpose of this study were to understand the accidents that arise in schools as well as the school safety management system and by analyzing affects that school safety management system has on accidents in schools, to come lip with a preventive plan. 906 high school sophomore students attending in Seoul were surveyed 1Tom November 12th to 23rd 2001. The results were following: 1. Students surveyed comprised of the following: Male 48.9%, Female 51.1% Public Schools 32.6%, Private Schools 67.4% Boys Schools 48.9%, Girls Schools 51.1% 2. In the past year, male students had more accidents(p〈.05) in school. 3. In examining students safety management control, 94.0% said that, there is an infirmary, there is a clear distinction between the playing fields and pathways(74.8%), and the chemicals in the labs are kept in a safe manner(77.2%). The above items were generally well maintained. However, the following recorded low scores. There are warning signs in hazardous places and facilities(30.5%), There is guiding principle to examine the safeness on a regular basis(24.9%), and There are slogans and posters preventing accidents(40.3%). 4. In examining the facilities of the schools that were surveyed, the majority answered, yes to the following. There are hazardous facilities or materials at school(62.9%), There are sharp edges in educational supplies and equipment(59.8%), There are nails or other components that are sticking out of desks and chairs(75.9%), There are slippery spots in the corridors and classrooms(69.3%), There are stones, scrap metal, broken glass, and trash on the playing fields(66.6%). Furthermore, the students surveyed said, yes to the following although in low percentages. The amount of sand on the playing fields is sufficient(49.1%), The soccer and basket goal posts are fastened (53.7%), There are safety bars on the windows of classrooms and corridors (27.4%), There are safety mats on the entrance to restrooms preventing slips (14.2%), The stairs have slip protection measures(49.1%). 5. In analyzing the affect that the school safety management system has on accidents in school, schools that had slogans and posters preventing accidents had a 50% less chance of accidents(p〈.05), schools with chemicals and equipment in the labs that were safely maintained had an 80% less probability of accidents(p〈.0l), and the schools that had sharp edges in the educational supplies and equipment had an 80% greater chance of accidents(p〈.01).

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.256-260
• /
• 2010

This study was carried out to investigate effects of stock plant management and foliar spray of GA on the flower quality in hydroponically grown chrysanthemum 'Shinma'. In the growth and development as affected by stock plant management, cut flower length, petal number and cut flower weight were the best in the plot of long day and chilling treatment showed 114 cm, 298 and 102 g, respectively. Chlorophyll content(SPAD-value) was the highest in the plot of foliar spray of diluted Molbia(1 : 500). Flower quality according to concentration and spray time of gibberellin showed a different pattern. Cut flower length was the longest in the plot of solution diluted to 1 : 1,000 spraying before flowering at 60 days, petal number was the most in 1 : 500 at 60 days, and cut flower weight was the heaviest in 1 : 2,000 at 60 days, respectively. However, peduncle length was tended to be elongated with foliar spray of gibberellin solution diluted to 1 : 500 or 1 : 1,000 before flowering at 45 days.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.569-577
• /
• 2021

CFRP(Carbon Fiber Reinforced Plastic) can maintain the same strength even if the diameter is reduced by about one - third, and the weight is about one - twentieth of that of the deformed reinforcing bars that have been used in the construction industry. In particular, it is resistant to corrosion, which is the weakest part of reinf orcing bars, and there is no concern that it will deteriorate over time, It is light and durable, so transportation costs are low and it is convenient for high-rise buildings. This paper experimentally clarifies the adhesive properties of CFRP and clarifies its behavior. That is, bond strength test was conducted with the directness of CFRP and the strength of concrete as experimental variables, and the bond mechanism was clarified experimentally. Furthermore, based on the experimental results, we constructed the bond stress-slip-strain relationship of CFRP compared to the existing deformed reinforcing bars.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.59-66
• /
• 2018

The utilized coefficient of friction (UCOF) as a ratio of the shear force to the normal force on the ground during walking is used to identify the point at which slip is likely to occur. Shoe walking will change the utilized coefficient of friction by shoe design such as sole thickness and hardness, heel shape, and outsole pattern. In this study, subjects are 21 adults (10 female, 11 male, age: $25.2{\pm}2.3yrs$, height: $165.6{\pm}7.2cm$), analysis variables were walking speed, GRF, when the UCOF is maximal, and Tangent of CoP-CoM angle, and correlation analysis with the utilized friction coefficient (UCOF). As a result, First, for the shod walking the time point which UCOF is maximum about heel strike was faster and the magnitude was larger than for barefoot walking. Second, the correlation between the tangent of CoP-CoM and UCOF of right foot was higher at the left heel striking point (UCOF2_h) which occurred in the post propulsion phase than at the right heel striking point (UCOF1_h). This suggests that the right foot UCOF is related to the braking phase of left foot( which is the propulsion phase of right foot) rather than the braking phase of right foot.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.825-836
• /
• 2022

Micropiles can be used to support additional load in extended building structures. However, their use brings about a risk of exceeding the bearing capacity of existing piles. In this study, pre-compression was applied to distribute the load of an existing building to micropiles, and an indoor loading test was performed to confirm the structural applicability of a wedge-type anchorage device designed to improve its capacity. According to the test results, the maximum strain of the anchorage device was 0.63 times that of the yield strain, and the amount of slip generated at the time of anchorage was 0.11 mm, satisfying structural standards. In addition, using MIDAS GTS, a geotechnical finite element analysis software, the effect of the size of the pre-compression, the thickness of the soil layer, and the ground conditions around the tip on the reaction force of the existing piles and micropiles were analyzed. From the numerical analysis, as the size of the pre-compression load increased, the reaction force of the existing pile decreased, resulting in a reduction rate of up to 36 %. In addition, as the soil layer increased by 5 m, the reduction rate decreased by 4 %, and when the ground condition at the tip of the micropile was weathered rock, the reduction rate increased by 14 % compared with that of weathered soil.