• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권9호
• /
• pp.389-401
• /
• 2002

To complement the conventional fusion methodologies of state fusion and measurement fusion, a time-propagated measurement fusion methodology is proposed. Various aspects of common process noise are investigated regarding information preservation. Based on time-propagated measurement fusion methodology, four compression filters are derived. The derived compression filters are efficient in asynchronous sensor fusion and fault detection since they maintain correct statistical information. A new batch Kalman recursion is proposed to show the optimality under the time-propagated measurement fusion methodology. A simple simulation result evaluates estimation efficiency and characteristic.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.93-100
• /
• 2006

본 논문에서는 레이더와 원격측정시스템으로부터 수신되는 다중센서자료를 모사하는 시뮬레이터 설계와 이들 자료를 융합하기 위한 알고리듬 개발에 대하여 소개한다. 설계된 데이터 시뮬레이터는 실제 센서 시스템으로부터 얻게 되는 시간의 비동기, 통신지연, 다중 갱신주기들을 갖는 모의센서 자료를 생성하며 실제적인 센서 모델을 이용하여 측정 잡음을 생성한다. 융합알고리듬은 센서 바이어스 상태를 고려한 PVA모델을 기초로 21차 분산형 칼만 필터로 설계되었고, 센서의 이상이나 정상적이 아닌 측정치를 검출하기 위한 로직도 포함되었다. 설계된 알고리듬을 시뮬레이터에서 생성한 모의 자료 및 실제 자료를 적용하여 검증하였다.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1551-1558
• /
• 2014

We propose a multi-rate sensor fusion of vision and radar using Kalman filter to solve problems of asynchronized and multi-rate sampling periods in object vehicle tracking. A model based prediction of object vehicles is performed with a decentralized multi-rate Kalman filter for each sensor (vision and radar sensors.) To obtain the improvement in the performance of position prediction, different weighting is applied to each sensor's predicted object position from the multi-rate Kalman filter. The proposed method can provide estimated position of the object vehicles at every sampling time of ECU. The Mahalanobis distance is used to make correspondence among the measured and predicted objects. Through the experimental results, we validate that the post-processed fusion data give us improved tracking performance. The proposed method obtained two times improvement in the object tracking performance compared to single sensor method (camera or radar sensor) in the view point of roots mean square error.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.107-109
• /
• 2004

In this paper, authors propose the sensor fusion system that can recognize multiple 3D objects from 2D projection images and tactile information. The proposed system focuses on improving recognition performance of 3D object. Unlike the conventional object recognition system that uses image sensor alone, the proposed method uses tactual sensors in addition to visual sensor. Neural network is used to fuse these informations. Tactual signals are obtained from the reaction force by the pressure sensors at the fingertips when unknown objects are grasped by four-fingered robot hand. The experiment evaluates the recognition rate and the number of teaming iterations of various objects. The merits of the proposed systems are not only the high performance of the learning ability but also the reliability of the system with tactual information for recognizing various objects even though visual information has a defect. The experimental results show that the proposed system can improve recognition rate and reduce learning time. These results verify the effectiveness of the proposed sensor fusion system as recognition scheme of 3D object.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.156-165
• /
• 2005

Human being recognizes the physical world by integrating a great variety of sensory inputs, the information acquired by their own action, and their knowledge of the world using hierarchically parallel-distributed mechanism. In this paper, authors propose the sensor fusion system that can recognize multiple 3D objects from 2D projection images and tactile informations. The proposed system focuses on improving recognition performance of 3D objects. Unlike the conventional object recognition system that uses image sensor alone, the proposed method uses tactual sensors in addition to visual sensor. Neural network is used to fuse the two sensory signals. Tactual signals are obtained from the reaction force of the pressure sensors at the fingertips when unknown objects are grasped by four-fingered robot hand. The experiment evaluates the recognition rate and the number of learning iterations of various objects. The merits of the proposed systems are not only the high performance of the learning ability but also the reliability of the system with tactual information for recognizing various objects even though the visual sensory signals get defects. The experimental results show that the proposed system can improve recognition rate and reduce teeming time. These results verify the effectiveness of the proposed sensor fusion system as recognition scheme for 3D objects.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.471-475
• /
• 2003

This paper proposes a sensor-fusion technique where the data sets for the previous moments are properly transformed and fused into the current data sets to enable accurate measurement, such as, distance to an obstacle and location of the service robot itself. In the conventional fusion schemes, the measurement is dependent on the current data sets. As the results, more of sensors are required to measure a certain physical parameter or to improve the accuracy of the measurement. However, in this approach, instead of adding more sensors to the system, the temporal sequence of the data sets are stored and utilized for the measurement improvement. Theoretical basis is illustrated by examples and the effectiveness is proved through the simulations. Finally, the new space and time sensor fusion (STSF) scheme is applied to the control of a mobile robot in an unstructured environment as well as structured environment.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권1호
• /
• pp.31-40
• /
• 2010

For weapon cueing and Head-Mounted Display (HMD), it is essential to continuously estimate the motion of the helmet. The problem of estimating and predicting the position and orientation of the helmet is approached by fusing measurements from inertial sensors and stereo vision system. The sensor fusion approach in this paper is based on nonlinear filtering, especially expended Kalman filter(EKF). To reduce the computation time and improve the performance in vision processing, we separate the structure estimation and motion estimation. The structure estimation tracks the features which are the part of helmet model structure in the scene and the motion estimation filter estimates the position and orientation of the helmet. This algorithm is tested with using synthetic and real data. And the results show that the result of sensor fusion is successful.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1336-1338
• /
• 1994

Cell fusion device is an artificial equipment which fuses electrically two types of cells fed from the respective micropump to the fusion chamber by electric pulses. In this case, the detective sensor of flowing cell, along with passage, is required to control the time of pulses applied to cell and the injection of cells which are fed from inlet to micropump. There are two methods of detection of flowing cell; optical, impedance method. The difference of output for optical sensor is about 426mV for 805nm wavelength. about 37mV for 665nm wavelength. In impedance method, sensor output is 132.33mV at middle point and 117.10mV at edge point in the channel. Experimental results show that the optimal frequency range of sensor output is Iron 50Hz to 400Hz.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.301-309
• /
• 2023

Tilt is a key indicator of structural safety. Real-time monitoring of tilt responses helps to evaluate structural condition, enable cost-effective maintenance, and enhance lifetime resilience. This paper presents a prototype wireless sensing system for structural tilt measurement. Long range (LoRa) technology is adopted by the sensing system to offer long-range wireless communication with low power consumption. The sensor integrates a gyroscope and an accelerometer as the sensing module. Although tilt can be estimated from the gyroscope or the accelerometer measurements, these estimates suffer from either drift issue or high noise. To address this challenging issue and obtain more reliable tilt results, two sensor fusion algorithms, the complementary filter and the Kalman filter, are investigated to fully exploit the advantages of both gyroscope and accelerometer measurements. Numerical simulation is carried out to validate and compare the sensor fusion algorithms. Laboratory experiment is conducted on a simply supported beam under moving vehicle load to further investigate the performance of the proposed wireless tilt sensing system.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권4호
• /
• pp.274-282
• /
• 2009

기동물체 추적을 위해서 GPS, INS, 레이더 및 광학장비 등의 다양한 위치추적 센서가 이용되고 있으며, 기동물체의 강인한 추적성능을 유지하기 위해 이기종 센서의 효과적인 융합방법이 필요하다. 이기종 다중센서를 이용한 추적성능 향상을 위해 센서의 서로 다른 오차특성을 고려하여 각 센서의 측정치를 상이한 모델로 간주하여 융합하는 연구가 수행되었지만, 한 센서의 오차가 급격히 증가하는 구간에서 다른 센서의 추정치에 대한 오차가 증가하고 각 센서의 측정값이 참 값일 확률인 Sensor Probability 값에 대해 센서 측정치 변화를 실시간으로 반영하지 못하였다. 본 논문에서는 각 센서 칼만필터의 갱신추정치와 측정치 간의 차이에 대한 RMSE(Root Mean Square Error)를 비교하여 Sensor Probability를 구하고, 결합추정치를 다시 각 센서 칼만필터 입력값으로 대입하는 과정을 제외하여 센서 측정치에 대한 실시간적인 반영과 센서 성능이 급격히 저하되는 구간에서의 추적성능을 개선한다. 제안하는 알고리즘은 각 센서의 오차특성을 조건부 확률값으로 추가하여 각 센서의 Sensor Probability에 따라 가장 양호한 성능을 보이는 센서 위주로 트랙융합을 함으로써 강인성을 보장 한다. 실험을 통해 UAV의 기동 경로를 생성하고 제안 알고리즘을 적용하여 다른 융합 알고리즘과 성능분석을 실시한다.