• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.1
• /
• pp.25-38
• /
• 2003

This study was conducted to establish the microbiological quality standards applying the HACCP system on sushi items of Japanese restaurant in Korea. The study evaluated hygienic conditions of kitchen and workers, pH time-temperature relationship, and microbial assessments during whole process of sushi making in 2001. Overall hygienic conditions were normal for both kitchen and for workers by 3 point scale, but hygienic controls against the cross-contamination were still needed. Each process of sushi making was performed under the risk of microbial contamination, since pH value of most of ingredients was over pH 4.6 and also production time(3.5~6 hrs) were long enough to cause problems. Microorganisms were high enough to cause foodborne illness ranged 8.0$\times$10$^2$~3.3$\times$10$^{6}$ CFU/g of TPC and 1.0$\times$10$^1$~1.6$\times$10$^3$CFU/g of coliforms, although TPC, coliforms and Staphylcoccus aureus were within the standard limits (TPC 10$^2$~10$^{6}$ CFU/g, coliforms 10$^3$CFU/g). However, Salmonella and Vibrio parahaemolyticus were not detected. High populations TPC and coliforms were also found in the cooks' hands and cooking utensils(TPC 10$^2$~10$^{6}$ CFU/100cm$^2$and Coliforms 10$^1$~10$^3$CFU/100cm$^2$). Based on the CCP decision tree analysis, the CCPs were the holding steps far six sushi production line except the tuna and the thawing step for tuna sushi. In conclusion, overall state of sushi production was fairly good but much improvement was still needed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.1
• /
• pp.69-84
• /
• 1993

In order to determine the optimum operational paramsters in cow manure composting, 4 laboratory scale composters were established. The cow manure was mixed with certain amount of saw dust to adjust the initial C/N ratio to 24, initial pH to 6.9 and composting was performed with varying operational conditions. It was found that the optimum aeration rate was 1000 ml/min kg. VS, the optimum moisture content 50% and no significant difference was found with different initial pH condition. Microorganisms were counted under the optimum conditions determined in this study. At the end of the experimental period, the number of bacteria, actinomycetes and fungi was $1.5{\times}10^9$ cells, $1.1{\times}10^8$ cells and $3.0{\times}10^8$ cells/g dry compost, respectively. At day 0, the number of coliforms, fecal coliforms and fecal streptococci was $3.1{\times}10^3$ cells, $7.5{\times}10^2$ cells and $5.6{\times}103$ cells/g dry composting material, respectively. Their population was decreased with time lapse, However, their survival time was longer than those reported by other researchers. Microorganisms were identified at the end of the experiment. Genus Bacillus was the most dominant comprising 89.3% of the total population. Among the Genus Bacillus, B. circulans compoex was the most abundant, followed by B. Stearothermophilus, B. Sphericus, B. licheniformis and B, brevis.

• Korean Journal of Psychosomatic Medicine
• /
• v.21 no.1
• /
• pp.62-71
• /
• 2013

Objectives : The purpose of this study is to investigate the characteristics of drinking patterns and the prevalence of hazardous drinking and alcohol use disorder with the assessment of alcohol policy needs in community population of urban city in Korea. Methods : Data was collected from 1,000 residents in a single urban city in Korea, from June 1 to July 31, 2011 by a questionnaire. As research tools, socio-demographic characteristics composed of variables based on study purpose, alcohol problems and alcohol use disorder state scales composed with Alcohol Use Disorder Identification Test(AUDIT) and Cut down, Annoyed, Guilty, Eye-opener(CAGE), and the assessment of alcohol policy needs in community population questions were used. Results : The lifetime experience of alcohol drinking was 97.4%. For the frequency of drinking, 21.9% of population responded 2 to 4 times per weekly. 24.4% of male had one time or more high risk drinking, defined as having four or more drinks in a sitting, per week. 51.6% experienced the first time drinking of alcohol in adolescence. The lifetime prevalence of hazardous drinking and alcohol use disorder were 14.9% and 3.3%, respectively using AUDIT. Alcohol use disorder were 9.6% with the CAGE scale. Problem drinking were 8.4% in this study. They requested the program such as prevention education(57.2%), construction of liaison system to treatment facilities(50.1%), alcohol counseling and intervention(41.7%), and rehabilitation program(39.8%). Conclusions : These results demonstrate that alcohol problem and alcohol use disorder were much prevalent, and these problem started in the earlier age. It is necessary to develop an effective alcohol prevention program or policy with considering the needs in community population.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.6
• /
• pp.65-77
• /
• 2017

Recently, many Korean major construction companies are suffering from profit loss mainly due to a direct impact from delays in their overseas projects. In general, changes are inevitable in a large-scale project, and most of changes are directly linked to construction delay. Therefore, in the event that an extension of time is necessary due to a change, the contractor must manage the delay based on the condition of the contract to effectively manage risks from delay to the completion date. Thus it is important to understand delay protocol defined in the condition of the contract early in the project, but there have been few or no study to propose methodology or tool to support this effort. This paper presents a review on the project planning and controling practices of major Korean construction companies along with the issues on delay claims and disputes in mega-international projects and suggests a tool to assess delay risk in the condition of the contract. To propose a delay risk assessment model for international construction projects, major standard conditions of contract have been reviewed including FIDIC Red Book(1999), PSSCOC(2014) and SIA 9th Edition(2010). To reflect recent trend of major international owners, standard conditions which they are utilizing for their projects also have been reviewed including those of ARAMCO and QP. The model provides a categories of risks to be reviewed on the condition of the contract along with standard level of the risk which is common in the international standard form of the contracts. This study also performed a case study on an actual international project to confirm the effectiveness of proposed model to identify and respond to a delay risk of a project.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.43-62
• /
• 2004

Conventionally the estimation method of the origin-destination Matrix has been developed by implementing the expansion of sampled data obtained from roadside interview and household travel survey. In the survey process, the bigger the sample size is, the higher the level of limitation, due to taking time for an error test for a cost and a time. Estimating the O-D matrix from observed traffic count data has been applied as methods of over-coming this limitation, and a gradient model is known as one of the most popular techniques. However, in case of the gradient model, although it may be capable of minimizing the error between the observed and estimated traffic volumes, a prior O-D matrix structure cannot maintained exactly. That is to say, unwanted changes may be occurred. For this reason, this study adopts a conjugate gradient algorithm to take into account two factors: estimation of the O-D matrix from the conjugate gradient algorithm while reflecting the prior O-D matrix structure maintained. This development of the O-D matrix estimation model is to minimize the error between observed and estimated traffic volumes. This study validates the model using the simple network, and then applies it to a large scale network. There are several findings through the tests. First, as the consequence of consistency, it is apparent that the upper level of this model plays a key role by the internal relationship with lower level. Secondly, as the respect of estimation precision, the estimation error is lied within the tolerance interval. Furthermore, the structure of the estimated O-D matrix has not changed too much, and even still has conserved some attributes.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.382-387
• /
• 2014

The PC/ABS blends were manufactured with high shear rate processing. Changes of the blend morphology were analyzed according to the screw speed and processing time. To find optimal conditions of the high shear rate processing of the PC/ABS blend, blend morphology and size of the dispersed phase, ABS, were observed with a SEM. Also, tensile properties of the PC/ABS blends were measured to investigate the effect of the high shear rate process with the screw speed of 500 rpm to 3000 rpm for processing times of 10s to 40s. Especially, to observe the dispersed phase of the PC/ABS blend clearly, fracture surfaces of the PC/ABS blend were etched with chromic acid solution. As screw speed and processing time increase, dispersed phase size of the PC/ABS blend decreases and mechanical properties of the blend decrease as well. Especially, at screw speed over than 1000 rpm of high shear rate processing, mechanical properties of the PC/ABS blends decrease drastically due to the degradation of the blend during the high shear rate processing. Consequently, the optimal condition of screw speed of the high shear processing of the PC/ABS blend is set at 1000rpm, in this study. Under optimal condition, the PC/ABS blend has relatively high mechanical properties with the relatively stable micro-structure having nanometer scale dispersed phase.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.1 no.1
• /
• pp.13-59
• /
• 1996

Dep. of Classics &Medical History, College of Oriental Medicint, Kyung Hee University Today, many people are more interested Today, many people are more interested in preventing the disease than curing it. Chi-Kung(氣功) is the way of Life-Cultivation(養生法) peculiar to the orient, it is reported in china that Chi-Kung has an excellent curative value not only in curing the disease but also in preventing it. But the full-scale study of Chi-Kung is not be made up to now in Korea, so I studied the developmental history of chinese Chi-Kung through the oriental medical books. From this study, I reached the following conclusions; 1. Chi-Kung is naturally derived from the self-preservation instinct to adapt oneself to circumstances of the nature, but in the investigation from the documentational records, it is originated in the treatment method of the Sam-Huang-O-Jae(三皇五帝) period to cure the abnormal circulation of the vital force and blood caused by damp(濕). 2. As the principle and the method of the Life-Cultivation of the Chun-Chu-Jeon-Kook(春秋戰國) period were recorded in Huang-Jae-Nai-Gyung(黃帝內經) detailly and the remedy examples by ancient Chi-Kung such as Tao-Yin(導引), Haeng-Chi(行氣) were presented, we considered that theoretical basis of the development of Life-cultivation and Chi-Kung study was furnished in that period. 3. A famous doctor, Hwa-Ta(華引) lived in Han dynasty, researched the theory and practice of Tao-Yin transmitted from the former generations, as that result, he formed a kind of medical, gymnastics what is called O-Keum-Hi(五禽?). It is considered that 'O-Keum-Hi' is a Tao-Yin method developed more practically and systemetically than the Tao-Yin appeared in the 'Jang-Ja'(莊子) or 'Hoy-Nam-Ja'(淮南子). 4. In Wui-Jin-Nambook-Jo(魏曺南北朝) periods, the contents of Chi-Kung were more abundant under the influence of Buddhism(佛敎) and Taoism(道敎). Galhong(葛洪), the author of 'Po-Bak-Ja'(抱朴子) arranged the ancient Chi-Kung method systematically first of all, Tao-Goeng-Gyung, the author of 'Yang-Seong-Yeun-Myung-Rok'(養性延命錄) recorded the 'Yook-Ja-Geul'(六字訣) first time. 5. There is a new development of Chi-Kung therapy in Soo-Tang-Odae(隋唐五代) periods, especially So-Won-Bang(巢元方), the author of 'Jey-Bang-Won-Hwu-Ron' collected almost all of the Chi-Kung method, for curing the disease formed before Soo(隋) period. From that fact, we supposed that Chi-Kung was utilized more widely in curing the disease. 6. 'So-Ju-Cheon-Hwa-Hu-Peob'(小周天火候法) was adopted as the best orthodox approach under the influence of Nae-Tan-Taoist(道敎內丹學波) in Song-Keum-Won(宋金元) periods, especially in the song dynasty, 'Pal-Dan-Geum'(八段錦) was appearde and assignment of six-Chi(六氣) for bowel and viscera in the 'Yook-Ja-Geul'(六字訣) was decided firmly, that is to say Lung-Si(肺-?), Heart-Kha(心-呵), Spleen-Hoa(脾-呼), liver-Hoe(肝-噓), Kidney-chui(賢-吹), Three-Burner-shi(三焦-?). 7. In Myung-Cheong(明淸) periods, The general practitioner applied the principle of 'Byun-Jeng-Ron-Chi(辨證論治) to the Chi-Kung field, and after Myung dynasty the style of doing 'Yook-Ja-Gyel'(六字訣) was developed to the moving style. 8. Today, in china, the study on the Chi-Kyung is being progressed constantly under the positive assistance of government, Chi-Kung-Hak(氣功學) has taking its place as a branch of study step by step. It is considered that the establishment of Chi-Kung-Hak Classroom(氣功學敎室) and Medical Chi-Kung Center(氣功療法室) for special and systematic research are needed, at the same time the settlement of institutional system for training the Chi-Kung technician(氣功師) is also needed.

• Environmental Mutagens and Carcinogens
• /
• v.23 no.4
• /
• pp.131-134
• /
• 2003

There are significant differences in the extent of drug interactions between subjects. The influence of the genetic make up of drug metabolizing enzyme activities (CYP3A5, CYP2C19 and UDP-glucuronosyl transferase) on the pharmacokinetic drug interaction potential were studied in vivo. Nineteen healthy volunteers were grouped with regard to the $CYP3A5^{*}3$ allele, into homozygous wild-type (CYP3A5^{*}1/1^{*}1$, n=6), heterozygous $(CYP3A5^{*}1/^{*}3$, n=6), and homozygous variant-type $(CYP3A5^{*}3/^{*}3$, n=7) subject groups. The pharmacokinetic profile of intravenous midazolam was characterized before and after itraconazole administration (200 mg once daily for 4 days), and also following rifampin pretreatment (600 mg once daily for 10 days), with a washout period of 2 weeks in between. For omeprazole and moclobemide pharmacokinetic interaction study 16 healthy volunteers were recruited. The volunteer group comprised 8 extensive metabolizers and 8 poor metabolizers of CYP2C19, which was confirmed by genotyping. Subjects were randomly allocated into two sequence groups, and a single-blind, placebo-controlled, two-period crossover study was performed. In study I, a placebo was orally administered for 7 days. On the eighth morning, 300 mg of moclobemide and 40 mg of placebo were coadministered with 200 mL of water, and a pharmacokinetic study was performed. During study n, 40 mg of omeprazole was given each morning instead of placebo, and pharmacokinetic studies were performed on the first and eighth day with 300 mg of moclobemide coadministration. In the UGT study pharmacokinetics and dynamics of 2 mg intravenous lorazepam were evaluated before and after rifampin pretreatment (600 mg once daily for 10 days), with a washout period of 2 weeks in between. The subjective and objective pharmacodynamic tests were done before and 1, 2, 4, 6, 8, and 12 hrs after lorazepam administration. The pharmacokinetic profiles of midazolam and of its hydroxy metabolites did not show differences between the genotype groups under basal and induced metabolic conditions. However, during the inhibited metabolic state, the $CYP3A5^{*}3/^{*}3$ group showed a greater decrease in systemic clearance than the $CYP3A5^{*}1/^{*}1$ group $(8.5\pm3.8$ L/h/70 kg vs. $13.5\pm2.7$ L/h/70 kg, P=0.027). The 1'-hydroxymidazolam to midazolam AUC ratio was also significantly lower in the $CYP3A5^{*}3/^{*}3$,/TEX> group $(0.58\pm0.35,$ vs. $1.09\pm0.37$ for the homozygous wild-type group, P=0.026). The inhibition of moclo-bemide metabolism was significant in extensive metabolizers even after a single dose of omeprazole. After daily administration of omeprazole for 1 week, the pharmacokinetic parameters of moclobemide and its metabolites in extensive metabolizers changed to values similar to those in poor metabolizers. In poor meta-bolizers, no remarkable changes in the pharmacokinetic parameters were observed. The area under the time-effect curves of visual analog scale(VAS), choice reaction time, and continuous line tracking test results of lorazepam was reduced by 20%, 7%, 23% respectively in induced state, and in spite of large interindividual variablity, significant statistical difference was shown in VAS(repeated measures ANOVA, p=0.0027).

• Asia pacific journal of information systems
• /
• v.21 no.3
• /
• pp.71-96
• /
• 2011

Within the traditional medical delivery system, patients residing in medically vulnerable areas, those with body movement difficulties, and nursing facility residents have had limited access to good healthcare services. However, Information and Communication Technology (ICT) provides us with a convenient and useful means of overcoming distance and time constraints. ICT is integrated with biomedical science and technology in a way that offers a new high-quality medical service. As a result, rapid technological advancement is expected to play a pivotal role bringing about innovation in a wide range of medical service areas, such as medical management, testing, diagnosis, and treatment; offering new and improved healthcare services; and effecting dramatic changes in current medical services. The increase in aging population and chronic diseases has caused an increase in medical expenses. In response to the increasing demand for efficient healthcare services, a telehealth service based on ICT is being emphasized on a global level. Telehealth services have been implemented especially in pilot projects and system development and technological research. With the service about to be implemented in earnest, it is necessary to study its overall acceptance by consumers, which is expected to contribute to the development and activation of a variety of services. In this sense, the study aims at positively examining the structural relationship among the acceptance factors for telehealth services based on the Technology Acceptance Model (TAM). Data were collected by showing audiovisual material on telehealth services to online panels and requesting them to respond to a structured questionnaire sheet, which is known as the information acceleration method. Among the 1,165 adult respondents, 608 valid samples were finally chosen, while the remaining were excluded because of incomplete answers or allotted time overrun. In order to test the reliability and validity of the assessment scale items, we carried out reliability and factor analyses, and in order to explore the causal relation among potential variables, we conducted a structural equation modeling analysis using AMOS 7.0 and SPSS 17.0. The research outcomes are as follows. First, service quality, innovativeness of medical technology, and social influence were shown to affect perceived ease of use and perceived usefulness of the telehealth service, which was statistically significant, and the two factors had a positive impact on willingness to accept the telehealth service. In addition, social influence had a direct, significant effect on intention to use, which is paralleled by the TAM used in previous research on technology acceptance. This shows that the research model proposed in the study effectively explains the acceptance of the telehealth service. Second, the research model reveals that information privacy concerns had a insignificant impact on perceived ease of use of the telehealth service. From this, it can be gathered that the concerns over information protection and security are reduced further due to advancements in information technology compared to the initial period in the information technology industry, and thus the improvement in quality of medical services appeared to ensure that information privacy concerns did not act as a prohibiting factor in the acceptance of the telehealth service. Thus, if other factors have an enormous impact on ease of use and usefulness, concerns over these results in the initial period of technology acceptance may become irrelevant. However, it is clear that users' information privacy concerns, as other studies have revealed, is a major factor affecting technology acceptance. Thus, caution must be exercised while interpreting the result, and further study is required on the issue. Numerous information technologies with outstanding performance and innovativeness often attract few consumers. A revised bill for those urgently in need of telehealth services is about to be approved in the national assembly. As telemedicine is implemented between doctors and patients, a wide range of systems that will improve the quality of healthcare services will be designed. In this sense, the study on the consumer acceptance of telehealth services is meaningful and offers strong academic evidence. Based on the implications, it can be expected to contribute to the activation of telehealth services. Further study is needed to assess the acceptance factors for telehealth services, such as motivation to remain healthy, health care involvement, knowledge on health, and control of health-related behavior, in order to develop unique services according to the categorization of customers based on health factors. In addition, further study may focus on various theoretical cognitive behavior models other than the TAM, such as the health belief model.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.51-63
• /
• 2002

The purpose of this study was to be of use for getting rid of job stress from dental technicians, by examining how much they were stressed out at work place as one of the professional medical personnels. The subjects in this study were 255 selected dental technicians who were working in the region of Taegu. The one-on-one interview was conducted from March 1 to 30, 2001, with structured questionnaire. The questionnaire sued in this study included 19 question items about the general characteristics and 29 items regarding job stress. The job stress was categorized into seven subareas based on earlier studies and considering the job situations of dental technicians: heavy workload, job conflicts, improper treatment, role and job knowledge, human relations, physical environment and personal matters. The job stress extent was measured on five-point Likert scale that is widely used in social science: one point for no stress, two for little stress, three for so-so, four for a little stress, and five for severe stress. Therefore, a higher point means a severer job stress. The reliability of the questionnaire turned out very good with Cronbach a = 0.9272. The findings of this study were as follows: 1. The general characteristics of the dental technicians investigated could be described as below: (1) By gender, 80.4% of the dental technicians were male, and 50.2%, the largest percentage, were in their 20s, followed by those in their 30s, those in their 40s, and those in their 50s in the order named. (2) The most common work place was dental technician shop(92.5%), followed by dental technology room in dental hospital or clinic and in general hospital in the order named. The primary duties were coating materials work(30.6%), followed by sculpture, grinding, partial and full denture and orthodontics in the order named. 2. The most larges (1) The most largest motivation to be a dental technician was its being a professional(33.7%), followed by the advice from others, their own aptitude, and good economic treatment in the order named. 3. Their job stress could be explained as below: (1) Their collective job stress average was 3.96$^{\circ}{\ae}$0.50 on the basis of 5 point, which showed that they were exposed to a fairly severe job stress. (2) By area, they were most stressed out from heavy workload (4.12), and they also were severely stressed from role and job knowledge(4.02) and personal matters(4.00). (3) By situation, they were most stressed when the disagreement of prosthesis that results from a specific error is unconditionally attributed to them(4.43). And they were also stressed a lot when their workload increases due to the rework(4.38), when a dentist asks something difficult for them to resolve(4.20), when heavy workload makes their working hours irregular and it's impossible to lead a personal life or have leisure time(4.16), and when they are o work for an excessively short time(4.16). This fact indicated that most of the dental technicians were exposed to a lot of stress in conjunction with job performance. 4. The main duties they took charge of didn't make any significant difference to their job stress, but yielded a significant difference to the extent of job stress in individual areas and the order of the most stressful one. Those who were engaged in grinding were most stressed from their own matters, whereas heavy workload was most stressful for those who were engaged in the other types of works. 5. As a result of seeing if their personal characteristics yielded any differences to job stress, the personal characteristics that made their job stress vary significantly were working hours, motivation of being a dental technician, job satisfaction and willingness to continue doing dental technology works. There was a tendency that longer working hours led to severer job stress, and those who chose to be a dental technician according to their own aptitude were less stressed than the others who became a dental technician because of economic reason or advices from others. And the people who were satisfied with their job were exposed to less job stress than the others who weren't, and those who had an intention to keep that job as much as possible were less stressed, compared to the others who hadn't.