• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.301-305
• /
• 2007

The performance of the railway bogie is classified into the stability and the steering performance. Testing for the bogie stability is conducted on the roller rig. But testing for the bogie steering performance on test facility is very difficult, so the testing for the vehicle curving performance is conducted on the real curve track. And it is desirable to test on the full scale test rig, but it caused many problems relating to test costs, test time. To overcome these problems, the small scale test rig is actively used in the field of bogie stability. Thus, in this paper, we have studied the scale track to test the bogie steering performance. For this, we designed the 1/5 scale test track equivalent to radius 200 curve and confirmed the validity of the testing for the bogie steering performance on the scale curve track through the testing using 1/5 scale bogie.

• Journal of Communications and Networks
• /
• 제16권5호
• /
• pp.534-547
• /
• 2014

Large-scale failures resulting from natural disasters or intentional attacks are now causing serious concerns for communication network infrastructure, as the impact of large-scale network connection disruptions may cause significant costs for service providers and subscribers. In this paper, we propose a new framework for the analysis and prevention of network service disruptions in large-scale failure scenarios. We build dynamic deterministic and probabilistic models to capture the impact of regional failures as they evolve with time. A probabilistic failure model is proposed based on wave energy behaviour. Then, we develop a novel approach for preventive protection of the network in such probabilistic large-scale failure scenarios. We show that our method significantly improves uninterrupted delivery of data in the network and reduces service disruption times in large-scale regional failure scenarios.

• 대기
• /
• 제18권2호
• /
• pp.83-95
• /
• 2008

In this study we have investigated the preceding eighteen large-scale climate indices with a lead time from zero to twelve months that have an influence on the variability of temperature and precipitation in Korea in order to understand which climate indices are overall available as predictors for long-range forecasting. We also have studied the dynamic link between preceding large-scale climate indices and regional climate using singular value decomposition analysis (SVDA) and correlation analysis (CA). Based on the coupled mode between large-scale circulation and regional climate, and correlation pattern between the preceding large-scale climate indices and large-scale circulation, the level of significance on climate indices as a predictor for monthly mean temperature and precipitation was evaluated for 5 and 1% level.

• 한국수자원학회논문집
• /
• 제49권12호
• /
• pp.995-1006
• /
• 2016

IPCC 제5차 평가보고서에 따르면 극한강우의 빈도 및 강도가 증가할 가능성이 매우 높을 것으로 예측되고 있다. 실제로 극한강우에 따른 침수피해가 증가하고 있으며, 이에 따라 기후변화의 영향을 반영한 미래 확률강우량 추정이 필요하다. 본 연구에서는 기후변화 RCP 8.5 시나리오로부터 도출된 미래 연 최대 일강수량 자료의 추세분석과 scale-invariance 기법을 이용하여 미래 확률강우량을 추정하였다. 먼저, 기상청 관할 60개 기상관측소의 관측 강우자료를 이용하여 관측소별로 스케일 특성을 검토한 후, 현재기후 모의자료를 이용하여 scale-invariance 기법의 적용가능성을 검증하였다. 그 후, 미래 일 강수량 시계열을 scale-invariance 특성에 따라 유도된 IDF 곡선식에 적용하여 기후변화의 영향을 반영한 지속시간별 확률강우량을 추정하였다. 대부분의 지점에서 확률강우량이 증가할 것으로 예측되었으나, 일부 지역의 경우에는 감소할 가능성도 있음을 살펴볼 수 있다.

• 컴퓨터교육학회논문지
• /
• 제17권3호
• /
• pp.1-10
• /
• 2014

유비쿼터스의 기능이 결합된 뉴미디어의 보급으로 인터넷 중독뿐만 아니라 스마트폰 중독은 정보화의 역기능으로 심각한 사회문제가 되고 있다. 대학생의 인터넷 중독과 스마트폰 중독정도를 비교분석하고자 지역 인근 대학교의 일부 대학생들에게 한국형 성인 인터넷 중독 자가진단 척도인 K-척도와 스마트폰 중독 자가진단 척도인 S-척도를 시행하였다. 본 연구에서는 컴퓨터와 스마트폰을 이용하여 웹사이트에 접속하는 기본적인 인터넷 이용패턴을 취득하는 설문문항을 개발하여, K-척도와 S-척도로는 별견되지 않는 숨겨진 인터넷 중독자와 스마트폰 중독자를 찾아서 K-척도와 S-척도의 진단결과와 비교하였다. 또한 K-척도 및 S-척도와 달리 대학생들의 컴퓨터와 스마트폰을 통한 인터넷 주활동과 예상 및 실제 사용시간을 계산하여 구한 내성정도를 이용하여 중독을 진단하는 방법을 제안하고자 한다. SPSS 통계분석 프로그램을 사용하여 숨겨진 인터넷 및 스마트폰 중독자를 찾을 수 있었다.

• 한국환경과학회지
• /
• 제20권4호
• /
• pp.501-509
• /
• 2011

Unlike many laboratory-scale studies on absorption of organic compounds (VOCs), limited pilot-scale studies have been reported. Accordingly, the present study was carried out to examine operation parameters for the effective control of a hydrophilic VOC (methyl ethyl ketone, MEK) by applying a circular pilot-scale packed-absorption system (inside diameter 37 cm ${\times}$ height 167 cm). The absorption efficiencies of MEK were investigated for three major operation parameters: input concentration, water flow rate, and ratio of gas flow-rate to washing water amount (water-to-gas ratio). The experimental set-up comprised of the flow control system, generation system, recirculation system, packed-absorption system, and outlet system. For three MEK input concentrations (300, 350, and 750 ppm), absorption efficiencies approached near 95% and then, decreased gradually as the operation time increased, thereby suggesting a non-steady state condition. Under these conditions, higher absorption efficiencies were shown for lower input concentration conditions, which were consistent with those of laboratory-scale studies. However, a steady state condition occurred for two input concentration conditions (100 and 200 ppm), and the difference in absorption efficiencies between these two conditions were insignificant. As supported by an established gas-liquid absorption theory, a higher water flow rate exhibited a greater absorption efficiency. Moreover, as same with the laboratory-scale studies, the absorption efficiencies increased as water-to-gas ratios increased. Meanwhile, regardless of water flow rates or water-to-gas ratios, as the operation time of the absorption became longer, the pH of water increased, but the elevation extent was not substantial (maximum pH difference, 1.1).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• 한국컴퓨터정보학회논문지
• /
• 제25권10호
• /
• pp.51-58
• /
• 2020

DDS 디스커버리는 같은 도메인을 사용하고, 다른 노드에 존재하는 DDS 객체를 찾는 과정이다. 한 노드에서 DDS 디스커버리 과정이 실패한다면, DDS 디스커버리가 실패한 노드에서 정상적인 DDS 데이터 송수신이 불가능하여 시스템 운용에 큰 영향을 미칠 수 있다. 그렇기 때문에, DDS 디스커버리의 성능을 향상시켜 DDS 디스커버리 과정을 빠르게 완료하고, 네트워크 부하와 컴퓨터 자원 사용량을 줄여서 DDS 디스커버리가 실패할 수 있는 가능성을 줄일 수 있다면 전체 시스템의 성능 향상에 큰 영향을 줄 수 있다. 본 논문에서는 대용량 시스템에서 DDS 디스커버리 시간과 네트워크 부하, 컴퓨터 자원 사용량을 줄일 수 있는 성능 향상을 위한 새로운 방법을 제안하고, 시험을 통하여 제안한 방법의 효율성을 증명한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.536-538
• /
• 2006

The most important factor of mobile robot is to build a map for surrounding environment and estimate its localization. This paper proposes a real-time localization and map building method through 3-D reconstruction using scale invariant feature from monocular camera. Mobile robot attached monocular camera looking wall extracts scale invariant features in each image using SIFT(Scale Invariant Feature Transform) as it follows wall. Matching is carried out by the extracted features and matching feature map that is transformed into absolute coordinates using 3-D reconstruction of point and geometrical analysis of surrounding environment build, and store it map database. After finished feature map building, the robot finds some points matched with previous feature map and find its pose by affine parameter in real time. Position error of the proposed method was maximum. 8cm and angle error was within $10^{\circ}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1359-1361
• /
• 1996

This paper describes a design of real time fuzzy controller using Minimum fuzzy control Rule Selection Method(MRSM). The control algorithm of dynamic systems needs less computation time and memory. To reduce the computation time of fuzzy logic controller, minimum number of rules are to be selected for the fuzzy input variable. The universe of discourse is divided by the number of linguistic labels to allocate the assigned membership function to the fuzzy input variables. In this case, since fuzzy input variables are continuous, scale factor SU is tuned independently. According to increment of SU control surface is improved to adapt the change of system parameter. At this, crisp control surface is increased. With the increament of crisp control surface, fuzzy control surface is reduced. When error state deviates from desirable error state, crisp control surface is more useful than fuzzy control surface for obtaining fast rising time.