• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1175-1184
• /
• 2008

Delay-sum back projection(DSBP) algorithm and the time reversal algorithm based on the finite-difference time-domain method are compared. The two algorithms, which operate in the time domain, can process the ultra-wideband (UWB) radar data to generate images that are close to the original location and shape of the target. For the experiment, the UWB radar consists of a network analyzer, a resistive V dipole antenna, a scanner, and a control computer. The radar aperture is synthesized by linearly scanning the antenna. A calibration procedure is applied to the measured data to remove signal distortion and clutter. The two algorithms are applied to the same data on the same platform. It is shown that the DSBP algorithm produces better images but takes longer time to produce the images than the FDTD-TR algorithm.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.152-156
• /
• 1994

The rapid thermal annealing effects of Sol-Gel derived ferroelectric PZT thin films were investigated. It was found that rapid thermal annealing(RTA) of spin coated thin films on silicon typically >$800^{\circ}C$ for about 1 min. was changed to the perovskite phase. Rapid thermally annealed films recorded maximum remanent polarization of about 5 .mu.C/cm$^{2}$, coercive field of around 30kV/cm. The switching time for polarization reversal was about 220ns. The films of RTA process showed smooth surface, and high breakdown voltages of over 1 MV/cm and resistivity of $1{\times}{10^12}$ .ohm.cm at 1 MV/cm. It was verified that the polarization reversal of the PZT film was varied partially with applying the multiple short pulse.

• Journal of Information Processing Systems
• /
• v.18 no.3
• /
• pp.402-410
• /
• 2022

Digital data can be manipulated easily, so information related to the timestamp is important in establishing the reliability of the data. The time values for a certain file can be extracted following the analysis of the filesystem metadata or file internals, and the information can be utilized to organize a timeline for a digital investigation. Suppose the reversal of a timestamp is found on a mobile device during this process. In this case, a more detailed analysis is required due to the possibility of anti-forensic activity, but little previous research has investigated the handling and possible manipulation of timestamps on mobile devices. Therefore, in this study, we determine how time values for multimedia files are handled according to the operating system or filesystem on mobile devices. We also discuss five types of timestamps-file created (C), last modified (M), last accessed (A), digitalized (Di), and filename (FN) of multimedia files, and experimented with their operational features across multiple devices such as smartphones and cameras.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.493-494
• /
• 2010

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.281-294
• /
• 2015

Bolted joint connection is the most commonly used connection element in structures and devices. The loosening due to external dynamic loads cannot be observed and measured easily and may cause catastrophic loss especially in an extreme requirement and/or environment. In this paper, an innovative Real-time Cross-Correlation Method (RCCM) for monitoring of the bolted joint loosening was proposed. We apply time reversal process on stress wave propagation to obtain correlation signal. The correlation signal's peak amplitude represents the cross-correlation between the loosening state and the baseline working state; therefore, it can detect the state of loosening. Since the bolt states are uncorrelated with noise, the peak amplitude will not be affected by noise and disturbance while it increases SNR level and increases the measured signals' reliability. The correlation process is carried out online through physical wave propagation without any other post offline complicated analyses and calculations. We implemented the proposed RCCM on a single bolt/nut joint experimental device to quantitatively detect the loosening states successfully. After that we implemented the proposed method on a real large structure (reaction wall) with multiple bolted joint connections. Loosening indexes were built for both experiments to indicate the loosening states. Finally, we demonstrated the proposed method's great anti-noise and/or disturbance ability. In the instrumentation, we simply mounted Lead Zirconium Titanate (PZT) patches on the device/structure surface without any modifications of the bolted connection. The low-cost PZTs used as actuators and sensors for active sensing are easily extended to a sensing network for large scale bolted joint network monitoring.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.8-13
• /
• 1998

This work presents the way how to evaluate the degree of reversibility of the discharging process undergone by the nickel hydroxide film cathodically deposited on pure nickel as a positive electrode for electrochemical capacitor using the combined cyclic voltammetry and potential drop method, supplemented by galvanostatic discharge and open-circuit potential transient methods. The time interval necessary just to establish the current reversal of anodic to cathodic direction from the moment just after applying the potential inversion of anodic to cathodic direction, was obtained on cyclic voltammogram. The cathodic charge density passed upon dropping the applied potential, was calculated on potentiostatic current density-time curve. Both the time interval and the cathodic charge density in magnitude can be regarded as being measures of the degree of reversibility of the discharging process undergone by the positive active material for supercapacitor, i.e. , the longer the time interval is, the lower is the degree of reversibility and the greater the cathodic charge density is, the higher is the degree of reversibility. From the applied potential dependences of the time interval and cathodic charge density, discharge at $0.42 V_{SCE}$ was determined to be the most reversible.

• BMB Reports
• /
• v.36 no.1
• /
• pp.78-81
• /
• 2003

The prevention of cancer is one of the most important public health and medical practices of the $21^{st}$ century. We have made much progress in this new emerging field, but so much remains to be accomplished before widespread use and practice become common place. Cancer chemoprevention encompasses the concepts of inhibition, reversal, and retardation of the cancer process. This process, called carcinogenesis, requires 20-40 years to reach the endpoint called invasive cancer. It typically follows multiple, diverse and complex pathways in a stochastic process of clonal evolution. These pathways appear amenable to inhibition, reversal or retardation at various points. We must therefore identify key pathways in the evolution of the cancer cell that can be exploited to prevent this carcinogenesis process. Basic research is identifying many genetic lesions and epigenetic processes associated with the progression of precancer to invasive disease. Many of these early precancerous lesions favor cell division over quiescence and protect cells against apoptosis when signals are present. Many oncogenes are active during early development and are reactivated in adulthood by aberrant gene promoting errors. Normal regulatory genes are mutated, making them insensitive to normal regulatory signals. Tumor suppressor genes are deleted or mutated rendering them inactive. Thus there is a wide range of defects in cellular machinery which can lead to evolution of the cancer phenotype. Mistakes may not have to appear in a certain order for cells to progress along the cancer pathway. To conquer this diverse disease, we must attack multiple key pathways at once for a predetermined period of time. Thus, agent combination prevention strategies are essential to decrease cancer morbidity. Furthermore, each cancer type may require custom combination of prevention strategies to be successful.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.332-336
• /
• 2007

Temperature is an essential process variable in nanoimprint lithography(NIL) where the temperature varies between room temperature and above the glass transition temperature. To simulate NIL process, we employ both the Nose-Poincare method for temperature controlled molecular dynamics(MD) and force field for polymer material i.e. polymethyl methacrylate(PMMA), which is most widely selected as NIL resist. Nose-Poincare method, which convinces the conservation of Hamiltonian structure and time-reversal symmetry, overcomes the drawbacks inherent in the conventional methods such as Nose thermostat and Nose-Hoover thermostat. Thus, this method exhibits enhanced numerical stability even when the temperature fluctuation is large. To describe PMMA, we adopt the force field which account for bond stretch, bending, torsion, inversion, partial charge, and van der Waals energy.

• Korean Management Science Review
• /
• v.11 no.1
• /
• pp.39-50
• /
• 1994

Carousel systems can be classified into unidirectional and bidirectional carousel, depending on the hardware structure. Bidirectional carousels again can be classified into reversible and irreversible carousel, depending on whether the reversal of direction is allowed or not during the process of an order. In this study, single carousel served by one operator is considered. Analytical models for the rotation distance to process an order of size are developed for unidirectional and irreversible bidirectional cases. For reversible bidirectional and Nearest Neighbor Heuristic cases, simulation results of the average rotation distance are presented. Since the throughput capacity of carousel systems also depends upon the picking time of the operator; order size; and the rotation speed of carousel, the model considers the above three factors to express the throughput capacity of single carousel systems.

• Clean Technology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2017

At high nitrate concentrations, water must be treated to meet regulated concentrations because it results in threat to human health and eutrophication of natural water. However, it is almost impossible to remove nitrate by conventional water treatment methods such as coagulation, filtration and precipitation, due to its high water solubility. Therefore, other technologies including adsorption, ion exchange, reverse osmosis, denitrification, and electrodialysis are required to effectively remove nitrate. Each of these technologies has their own strengths and drawbacks and their feasibility is weighted against factors such as cost, water quality improvement, residuals handling, and pre-treatment requirements. An adsorption technique is the most popular and common process because of its cost effectiveness, ease of operation, and simplicity of design. Surface modifications of adsorbents have been enhanced their adsorption of nitrate. The nitrate-selective membrane process of electrodialysis reversal and reverse osmosis have proven over time and at many locations to be highly effective in removing nitrate contaminating problems in aqueous solutions. Both electrodiaysis and reverse osmosis methods generate highly concentrated wastes and need careful consideration with respect to disposal.