• ETRI Journal
• /
• v.43 no.6
• /
• pp.978-990
• /
• 2021

This article presents techniques for improved estimation of symbol timing offset (STO) and carrier frequency offset (CFO) for dual-polarization (DP) orthogonal frequency division multiplex (DP-OFDM) systems. Recently, quaternion multiple-input multiple-output OFDM has been proposed for high spectral efficiency communication systems, which can flexibly explore different types of diversities such as space, time, frequency, and polarization. This article focuses on synchronization techniques for DP-OFDM systems using a cyclic prefix, where the application of quaternion algebra leads to new improved estimators. Simulations performed for DP system methods show faster reduction of STO estimator variance with a double-slope line in the logvariance line versus signal-to-noise ratio (SNR) plot compared with singlepolarization (SP) counterparts, and simulations for CFO estimates show a 3-dB gain of DP over SP estimates for same SNR values defined, respectively, for quaternion-valued or complex-valued signals. Cramer-Rao bounds for STO and CFO are derived for the synchronization methods, correlating with the observed gains of DP over SP OFDM systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.823-832
• /
• 2011

In this paper, an efficient blind carrier frequency offset (CFO) estimation method in orthogonal frequency division multiplexing (OFDM) systems is proposed. In the proposed method, we obtain two time different received OFDM symbols by using both the cyclic prefix and oversampling technique, and a cost function is defined by using the two OFDM symbols. We show that the cost function can be approximately expressed as a cosine function. Using a property of the cosine function, a formular for estimating the CFO is derived. The estimator of the CFO requires three independent cost function values calculated at three different points of frequency offset. The proposed method is very efficient in computational complexity since no searching operation for the minimum cost value is required. The proposed method reduces 97% of the amount of FFT computation, compared with the ML method. Unlike the conventional methods such as the ML method and the MUSIC] method, the accuracy of the proposed method is independent of the searching resolution since the closed form solution exists. The computer simulation shows that the performance of the proposed method is superior to those of the MUSIC and the ML method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.128-136
• /
• 2003

In today's design trend of vehicle structure, crush zone is fiequently reinforced by adding a box-shaped sub-frame in order to avoid an excessive deformation against a high-speed offset barrier such as EU Directive 96/97 EC, IIHS offset test. That kind of vehicle structure design results in a relatively monotonic crash pulse for airbag ECU(Electronic Control Unit) located at non-crush zone. As for an angular crash event, the measured crash signal using a single-axis accelerometer in a longitudinal direction is usually weaker than that of frontal barrier crash. Therefore, it is not so easy task to achieve a satisfactory crash discrimination performance for offset and angular crash events. In this paper, we introduce a new crash discrimination algorithm using an electronic X-Y 2-axis accelerometer in order to improve crash discrimination performance especially for those crash events. The proposed method uses a crash signal in lateral direction(Y-axis) as well as in longitudinal direction(X-axis). A crash severity measure obtained from Y-axis acceleration is used to improve the discrimination between fire and no-fire events. The result obtained by the proposed measure is logically ORed with an existing algorithm block using X-axis crash signal. Simulation and pulse injection test have been conducted to verify the performance of proposed algorithm by using real crash data of a 2,000cc passenger vehicle.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1257-1264
• /
• 2006

The carrier frequency offset causes loss of orthogonality between sub-carriers, thus leads to inter-carrier interference (ICI) in the OFDM symbol. This ICI causes severe degradation of the BER performance of the OFDM receiver. In this paper, we propose a new ICI cancellation algorithm which estimates frequency offset at the time-domain by using CP-ICA method to the received sub-carriers phase rotation. This algorithm is based on a statistical blind estimation method, which mainly utilizes the EVD, rotating phase and the $4^{th}-cumulants$. Since our scheme does not need any training and pilot symbol in estimation, we can expect enhanced bandwidth efficiency in OFDM systems. Simulation results show that the proposed frequency offset estimator is more accurate than the other estimators in $0.0<\varepsilon<1.0$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.290-297
• /
• 2014

The synchronization of OFDM receiver is consisted of symbol timing offset(STO) estimation in time domain and carrier frequency offset(CFO) estimation in frequency domain. This paper proposes new algorithm for correcting the integer CFO after we have done correcting the STO and partial CFO. ICFO must be corrected, since the ICFO lead to degrade bit error rate(BER) of demodulation performance. The PN sequence has information which is subcarrier order since the modified PN sequence, length is same subcarrier, is used in this paper and is modulated each subcarrier by each chip. Thus the receiver track phase of PN sequence after FFTin order to find the subcarrier frequency offset. The proposed algorithm is faster and more simple than convenient methode as measuring carrier energy.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.2
• /
• pp.67-75
• /
• 2007

To improve low sense margin at low voltage, we propose a negatively driven sensing (NDS) scheme and to solve the problem of WL-to-BL short leakage fail, a variable bitline reference scheme with free-level precharged bitline (FLPB) scheme is adopted. The influence of the threshold voltage offset of NMOS and PMOS transistors in a latch type sense amplifier is very important factor these days. From evaluating the sense amplifier offset voltage distribution of NMOS and PMOS, it is well known that PMOS has larger distribution in threshold voltage variation than that of NMOS. The negatively-driven sensing (NDS) scheme enhances the NMOS amplifying ability. The offset voltage distribution is overcome by NMOS activation with NDS scheme first and PMOS activation followed by time delay. The sense amplifier takes a negative voltage during the sensing and amplifying period. The negative voltage of NDS scheme is about -0.3V to -0.6V. The performance of the NDS scheme for DRAM at the gigabit level has been verified through its realization on 1-Gb DDR2 DRAM chip.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.63-71
• /
• 2003

In this paper we dicuss the dither-stripping methods by V-F(voltage to frequency) conversion of the output of angular velocity sensor which is for detecting the dither motion of the ring laser cavity. In this case, it is very important to evaluate the pulse-to-pulse scale factor between the ring lase output pulse and V-F output pulse, and also to compensate the zero offset of the V-F output pulse. In the case of the dither-stripping by the V-F conversion of angular velocity sensor output, there is a big angle uncertainty in the process of compensating the zero offset due to the dither noise for compensating the V-F output. By differential, the phase of the V-F output is changed. So, to compensate it, we change 90deg of the phase of angular velocity sensor output and delay half sampling time of the phase of ring laser output in advance. In this case the pulse-to-pulse scale factor can be evaluated by the standard deviation of each pulse. We can get the good result of the dither-stripping output by this angle differential method.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.265-270
• /
• 2007

The purpose of this study was to evaluate the possibility of utilizing MT pulse at CE-TOF-MRA in patients with cerebral infarction. MRA using time-of-flight(TOF) technique with varying offset frequencies (0, 600, 1,200, and 1,800 Hz) magnetization transfer were performed in 10 patients with cerebral infarction at 3.0T MR scanner. CE-TOF-MRA and TOF-SPGR in normal vessel shown decreased SNR and increased CNR. The highest CNR in narrowing vessel shown at CE-TOF-MRA using 600 and 1,200 Hz offset frequencies. CNR in stenosis vessel increased dependent on using offset frequencies. The occlusion was clearly shown, and the highest CNR in occlusion shown at CE-TOF-MRA using 1,800 Hz offset frequencies. There was no shape variation in narrowing vessel or no visualizing vessel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.1001-1009
• /
• 2009

In this paper, an efficient blind frequency offset estimation method for radio resource saving in orthogonal frequency division multiplexing (OFDM) systems is proposed. In the proposed method, we obtain two time different received OFDM signal blocks by using the cyclic prefix and define the cost function by using the two OFDM signal blocks. We show that the cost function can be approximately expressed as a closed form cosine function. The approximated cosine function can be obtained from three independent cost function values calculated at three different frequency offsets. In the proposed method, the frequency offset can be estimated by calculating a frequency offset minimizing the approximated cosine function without searching all the frequency offset range. Unlike the conventional methods such as MUSIC method, the accuracy of the proposed method is independent of the searching resolution since the closed form solution exists. The computer simulation shows that the performance of the proposed method is superior to those of the MUSIC and the oversampling method.

• Proceedings of the KOR-KST Conference
• /
• 2007.02a
• /
• pp.429-436
• /
• 2007