• Journal of Pharmacopuncture
• /
• v.21 no.2
• /
• pp.48-60
• /
• 2018

Objective: The aim of this study is to optimize the extraction of beneficial substance from Cudrania tricuspidata leaves grown at Jirisan Mountain in South Korea by three different solvents depending on extraction time and at different temperature. Methods: The total phenolic contents were determined by the method reported by $S{\acute{a}}nchez$-Moreno et al. The total flavonoid contents were analyzed by Slinkard and Singleton. The DPPH radical scavenging activity was determined according to the method reported by Blois Results: The extraction yield for each solvent is 9.05-14.1%, 2.17-5.67%, and 2.3-3.9% for D.W., ethanol, and hexane, respectively. The overall results were maximized for the extract obtained with D.W. for 5 min at $100^{\circ}C$. The average phenol contents were 77.11, 45.64, and 0.343 mg/g at $100^{\circ}C$ in water, $78^{\circ}C$ in ethanol, and $68^{\circ}C$ in hexane, respectively. The flavonoid contents were the highest in the materials extracted with D.W., and were increased with increasing temperature, regardless of the extraction solvents, whether water (green), polar organic ethanol, or nonpolar organic hexane. In the ethanol extract, the flavonoid contents are increased gradually from 5.66 mg/g to 7.73 mg/g. The total flavonoid contents were proportional to the concentrations of the water extracts, ranging from 4.14 mg/g to 48.89 mg/g. The antioxidative activities of the water-extracted compounds are generally increased with increasing temperature from 42.5% to 85.5%. Those of the hexane extracts are increased slowly from 3.79% to 8.8%, while those of ethanol extracts are increased from 29.8% to 47.4%. Conclusion: The extraction yields were dependent upon solvents for extraction as well as extraction time and the temperature. The optimal extraction time was 5 min and the extraction yields were increased with increasing temperature excepted hexane. Of the three tested extraction solvents, the greenest solvent of water shows excellent results, suggesting that water is among the most effective solvents for natural sample extractions for general medicinal, pharmaceutical, and food applications.

• Journal of Ginseng Research
• /
• v.40 no.3
• /
• pp.229-236
• /
• 2016

Background: Extraction conditions greatly affect composition, as well as biological activity. Therefore, optimization is essential for maximum efficacy. Methods: Korean Red Ginseng (KRG) was extracted under different conditions and antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content evaluated. Optimized extraction conditions were suggested using response surface methodology for maximum antioxidant activity and extraction yield. Results: Analysis of KRG extraction conditions using response surface methodology showed a good fit of experimental data as demonstrated by regression analysis. Among extraction factors, such as extraction solvent and extraction time and temperature, ethanol concentration greatly affected antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content. The optimal conditions for maximum antioxidant activity and extraction yield were an ethanol concentration of 48.8%, an extraction time 73.3 min, and an extraction temperature of $90^{\circ}C$. The antioxidant activity and extraction yield under optimal conditions were 43.7% and 23.2% of dried KRG, respectively. Conclusion: Ethanol concentration is an important extraction factor for KRG antioxidant activity and extraction yield. Optimized extraction conditions provide useful economic advantages in KRG development for functional products.

• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.325-329
• /
• 2018

In this study, polyphenols were extracted from Angelica, which are known to have a high antioxidant content and the extraction process was optimized using the response surface methodology. The extraction yield and the total polyphenols were set as response values for the methodology. Quantitative factors in the extraction process were the extraction time, volume ratio of alcohol/ultrapure water, and extraction temperature. When considering both the main and interaction effects, the greatest influence factor on the extraction yield and total polyphenols was the extraction time. The optimum extraction time and temperature and alcohol/ultrapure water volume ratio for angelica were 2.8 h, $56.6^{\circ}C$ and 64.0 vol% respectively. The extraction yield and total polyphenols when using the conditions were calculated to be 24.6% and 8.76 mg GAE/g. respectively. Determination coefficients of regression equations for the extraction yield and total polyphenols were 81.4 and 75.4%, respectively. Also the overall satisfaction level was found to be 0.80 and the significance was confirmed within 5%.

• Food Science of Animal Resources
• /
• v.43 no.1
• /
• pp.61-72
• /
• 2023

The practical use of Korean native black goat skin as a source of gelatin extraction is limited. The objective of this study was to optimize the extraction temperature and time of gelatin from Korean native black goat skin, and to compare the quality characteristics of goat skin gelatin and other commercial gelatin products. Response surface methodology was applied to optimize the extraction temperature and time of gelatin obtained from native Korean black goat skin. The effects of temperature (50℃-70℃) and time (2-4 h) on extraction yield and gel strength were investigated using a face-centered central composite design with 13 experiments. Gelatin extraction from Korean native black goat skin was prepared through the serial processes of alkali pre-treatment, bleaching, neutralization, hot-water extraction, and freeze-drying. Using the optimization plot of Minitab software, the optimized conditions for extracting temperature and time of goat skin gelatin were 59.49℃ and 3.03 h, and the optimized values of extraction yield and gel strength were 12.52% and 263.37 g, respectively. Based on a quality comparison of goat skin gelatin with commercial gelatin, the pH value of gelatin extracted from Korean native black goat skin was 5.57. The color of gelatin extracted from Korean native black goat skin was darker than that of commercial gelatin (p<0.05). Higher emulsifying properties and gel strength of goat skin gelatin were observed when compared to those of commercial gelatin (p<0.05). Therefore, the results of this study indicate that Korean native black goat skin may be a valuable source for gelatin extraction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.586-592
• /
• 1999

Microwave assisted extraction(MAE) is known as a more environmental friendly process with economic advantages in terms of less time, less solvent, less energy and less wastes than the current time consuming reflux method. It was applied to develop a rapid extraction method for soluble ginseng components that are major materials used for the processing of ginseng products. In a comparative study between pre established MAE(ethanol 60%, power 80 W, process time 4 min$\times$5) and current extraction method(ethanol 80%, temp. 85oC, time 8 hr$\times$5), MAE was more efficient than the current method to obtain an extract yield(soluble solid), but it was insufficient to extract individual ginsenosides, total phenols, reducing components and acidic polysaccharides. MAE with 80% ethanol by 5 times showed, however, that its extraction efficiency on soluble solid, crude saponin, major ginsenosides, and the other components was equal or superior to that of the current method, indicating that ethanol concentration is one of the critical parameters influencing the MAE process. The quality of ginseng extracts from MAE was assured by evaluating the corresponding standards and by comparing TLC and HPLC patterns with the control.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.86-97
• /
• 2021

As mechatronic systems have various, complex functions and require high performance, automatic fault detection is necessary for secure operation in manufacturing processes. For conducting automatic and real-time fault detection in modern mechatronic systems, multiple sensor signals are collected by internet of things technologies. Since traditional statistical control charts or machine learning approaches show significant results with unified and solid density models under normal operating states but they have limitations with scattered signal models under normal states, many pattern extraction and matching approaches have been paid attention. Signal discretization-based pattern extraction methods are one of popular signal analyses, which reduce the size of the given datasets as much as possible as well as highlight significant and inherent signal behaviors. Since general pattern extraction methods are usually conducted with a fixed size of time segmentation, they can easily cut off significant behaviors, and consequently the performance of the extracted fault patterns will be reduced. In this regard, adjustable time segmentation is proposed to extract much meaningful fault patterns in multiple sensor signals. By considering inflection points of signals, we determine the optimal cut-points of time segments in each sensor signal. In addition, to clarify the inflection points, we apply Savitzky-golay filter to the original datasets. To validate and verify the performance of the proposed segmentation, the dataset collected from an aircraft engine (provided by NASA prognostics center) is used to fault pattern extraction. As a result, the proposed adjustable time segmentation shows better performance in fault pattern extraction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.1
• /
• pp.61-64
• /
• 1990

The influence of extraction time on the fatty acid profile and the contents of calcium and magnesium in pig's shank were examined. The 9 kinds of fatty acid were identified in water extracts from pig's shank by GLC. The profiles of fatty acids from different extraction were similer to each other,. The content of linolenic acid was increased after two-hours extraction however the amounts of MUFA, PUFA and p/s ratio were decreased by the longer extraction time. The amount of calcium was 124.7mg% in raw materials but water extracts and bone powder samples showed higher values. in case of magnesium it was 138.4mg% in raw materials, but the extracts showed lower amount and bone powder exhibited higher values.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.465-470
• /
• 2006

Walnut hull is a by-product from the Walnut tree, used as natural dyestuff from ancient times. This study was done to examine the effects of extractive conditions on the properties of walnut hull extracts for making efficient use of the walnut hull as a natural colorant. Aqueous extracts of walnut hull were prepared at various extractive concentration, temperature and time. Then they were characterized using UV-Vis. Spectrophotometer, FT-IR Spectrometer, Prep Liquid Chromatography, and Energy dispersive X-ray spectrometer. The aqueous extracts have two absorbency peaks of UV-Vis. Spectrum, shoulder type peak in the range of 270-280 nm and broad type band around 420 nm. Intensity of absorbency is increased with increase of extraction concentration and time. However, Boiling temperature extraction method showed the most efficiency of all. Intensity of absorbency is also affected by extraction pH. The Prep LC examined two kinds of isolated colorant with different molecular weight. FT-IR spectra of hull extracts showed an absorption band around $3400cm^{-1}$, the peaks at $1700-1600cm^{-1}$, which are characteristic of aromatic compounds with unsaturated ketone and benzene ring. It showed that the extraction contained some mineral ions, such as K, Ca, Si, Mg.

• Food Science and Preservation
• /
• v.14 no.1
• /
• pp.73-77
• /
• 2007

The physiochemical properties of Rhododendron mucronulatum pollens were examined after the use of various extraction conditions. The levels of phenolic compounds and electron donating abilities (DPPH) were better after 80% (v/v) ethanol extraction than after water extraction. The content of phenolic compounds and the DPPH were high when the solvent ratio was 20X. The content of phenolic compounds was highest at $45^{\circ}C$ (347.60 mg/100 g). The DPPH was highest, at 67.93%, when extraction was performed at $25^{\circ}C$. An extraction time of 6 hr yielded the highest content of phenolic compounds (312.63 mg/100 g). The DPPH did not vary with extraction time. Both the levels of phenolic compounds and DPPH values rose when extractions were performed twice. In summary, a solvent ratio of 20X, an extraction temperature of $25-45^{\circ}C$, double extraction and an extraction time of 6 hare optimal for extraction, with maximal DPPH and phenolic content, of Jindalrae pollens.