• 대한약침학회지
• /
• 제21권2호
• /
• pp.48-60
• /
• 2018

Objective: The aim of this study is to optimize the extraction of beneficial substance from Cudrania tricuspidata leaves grown at Jirisan Mountain in South Korea by three different solvents depending on extraction time and at different temperature. Methods: The total phenolic contents were determined by the method reported by $S{\acute{a}}nchez$-Moreno et al. The total flavonoid contents were analyzed by Slinkard and Singleton. The DPPH radical scavenging activity was determined according to the method reported by Blois Results: The extraction yield for each solvent is 9.05-14.1%, 2.17-5.67%, and 2.3-3.9% for D.W., ethanol, and hexane, respectively. The overall results were maximized for the extract obtained with D.W. for 5 min at $100^{\circ}C$. The average phenol contents were 77.11, 45.64, and 0.343 mg/g at $100^{\circ}C$ in water, $78^{\circ}C$ in ethanol, and $68^{\circ}C$ in hexane, respectively. The flavonoid contents were the highest in the materials extracted with D.W., and were increased with increasing temperature, regardless of the extraction solvents, whether water (green), polar organic ethanol, or nonpolar organic hexane. In the ethanol extract, the flavonoid contents are increased gradually from 5.66 mg/g to 7.73 mg/g. The total flavonoid contents were proportional to the concentrations of the water extracts, ranging from 4.14 mg/g to 48.89 mg/g. The antioxidative activities of the water-extracted compounds are generally increased with increasing temperature from 42.5% to 85.5%. Those of the hexane extracts are increased slowly from 3.79% to 8.8%, while those of ethanol extracts are increased from 29.8% to 47.4%. Conclusion: The extraction yields were dependent upon solvents for extraction as well as extraction time and the temperature. The optimal extraction time was 5 min and the extraction yields were increased with increasing temperature excepted hexane. Of the three tested extraction solvents, the greenest solvent of water shows excellent results, suggesting that water is among the most effective solvents for natural sample extractions for general medicinal, pharmaceutical, and food applications.

• Journal of Ginseng Research
• /
• 제40권3호
• /
• pp.229-236
• /
• 2016

Background: Extraction conditions greatly affect composition, as well as biological activity. Therefore, optimization is essential for maximum efficacy. Methods: Korean Red Ginseng (KRG) was extracted under different conditions and antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content evaluated. Optimized extraction conditions were suggested using response surface methodology for maximum antioxidant activity and extraction yield. Results: Analysis of KRG extraction conditions using response surface methodology showed a good fit of experimental data as demonstrated by regression analysis. Among extraction factors, such as extraction solvent and extraction time and temperature, ethanol concentration greatly affected antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content. The optimal conditions for maximum antioxidant activity and extraction yield were an ethanol concentration of 48.8%, an extraction time 73.3 min, and an extraction temperature of $90^{\circ}C$. The antioxidant activity and extraction yield under optimal conditions were 43.7% and 23.2% of dried KRG, respectively. Conclusion: Ethanol concentration is an important extraction factor for KRG antioxidant activity and extraction yield. Optimized extraction conditions provide useful economic advantages in KRG development for functional products.

• Membrane and Water Treatment
• /
• 제4권1호
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• 공업화학
• /
• 제29권3호
• /
• pp.325-329
• /
• 2018

본 연구에서는 항산화성분함량이 높다고 알려진 안젤리카를 이용하여 폴리페놀을 추출하고 반응표면분석법을 이용하여 추출과정을 최적화하였다. 반응표면분석법의 반응치로는 추출수율과 폴리페놀함량을 설정하였고, 추출공정의 계량인자로는 추출시간, 주정/초순수 부피비, 추출온도를 이용하였다. 추출수율과 폴리페놀함량 모두 계량인자의 주효과도와 교호효과도를 모두 고려하였을 때 가장 큰 영향을 미치는 인자는 추출시간이었다. 또한 반응표면분석 결과 안젤리카의 최적추출조건은 추출시간이 2.8 h, 주정/초순수 부피비 64.0 vol%, 추출온도 $56.6^{\circ}C$로 나타났다. 이 조건의 추출수율은 24.6%, 폴리페놀함량은 8.76 mg GAE/g으로 산출되었다. 추출수율과 폴리페놀함량에 대한 회귀방정식의 결정계수 $R^2$은 각각 81.4%와 75.4%이었으며, 종합 만족도는 D = 0.80, 유의성은 5% 이내의 수준에서 인정되었다.

• 한국축산식품학회지
• /
• 제43권1호
• /
• pp.61-72
• /
• 2023

The practical use of Korean native black goat skin as a source of gelatin extraction is limited. The objective of this study was to optimize the extraction temperature and time of gelatin from Korean native black goat skin, and to compare the quality characteristics of goat skin gelatin and other commercial gelatin products. Response surface methodology was applied to optimize the extraction temperature and time of gelatin obtained from native Korean black goat skin. The effects of temperature (50℃-70℃) and time (2-4 h) on extraction yield and gel strength were investigated using a face-centered central composite design with 13 experiments. Gelatin extraction from Korean native black goat skin was prepared through the serial processes of alkali pre-treatment, bleaching, neutralization, hot-water extraction, and freeze-drying. Using the optimization plot of Minitab software, the optimized conditions for extracting temperature and time of goat skin gelatin were 59.49℃ and 3.03 h, and the optimized values of extraction yield and gel strength were 12.52% and 263.37 g, respectively. Based on a quality comparison of goat skin gelatin with commercial gelatin, the pH value of gelatin extracted from Korean native black goat skin was 5.57. The color of gelatin extracted from Korean native black goat skin was darker than that of commercial gelatin (p<0.05). Higher emulsifying properties and gel strength of goat skin gelatin were observed when compared to those of commercial gelatin (p<0.05). Therefore, the results of this study indicate that Korean native black goat skin may be a valuable source for gelatin extraction.

• 한국식품영양과학회지
• /
• 제28권3호
• /
• pp.586-592
• /
• 1999

Microwave assisted extraction(MAE) is known as a more environmental friendly process with economic advantages in terms of less time, less solvent, less energy and less wastes than the current time consuming reflux method. It was applied to develop a rapid extraction method for soluble ginseng components that are major materials used for the processing of ginseng products. In a comparative study between pre established MAE(ethanol 60%, power 80 W, process time 4 min$\times$5) and current extraction method(ethanol 80%, temp. 85oC, time 8 hr$\times$5), MAE was more efficient than the current method to obtain an extract yield(soluble solid), but it was insufficient to extract individual ginsenosides, total phenols, reducing components and acidic polysaccharides. MAE with 80% ethanol by 5 times showed, however, that its extraction efficiency on soluble solid, crude saponin, major ginsenosides, and the other components was equal or superior to that of the current method, indicating that ethanol concentration is one of the critical parameters influencing the MAE process. The quality of ginseng extracts from MAE was assured by evaluating the corresponding standards and by comparing TLC and HPLC patterns with the control.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.86-97
• /
• 2021

As mechatronic systems have various, complex functions and require high performance, automatic fault detection is necessary for secure operation in manufacturing processes. For conducting automatic and real-time fault detection in modern mechatronic systems, multiple sensor signals are collected by internet of things technologies. Since traditional statistical control charts or machine learning approaches show significant results with unified and solid density models under normal operating states but they have limitations with scattered signal models under normal states, many pattern extraction and matching approaches have been paid attention. Signal discretization-based pattern extraction methods are one of popular signal analyses, which reduce the size of the given datasets as much as possible as well as highlight significant and inherent signal behaviors. Since general pattern extraction methods are usually conducted with a fixed size of time segmentation, they can easily cut off significant behaviors, and consequently the performance of the extracted fault patterns will be reduced. In this regard, adjustable time segmentation is proposed to extract much meaningful fault patterns in multiple sensor signals. By considering inflection points of signals, we determine the optimal cut-points of time segments in each sensor signal. In addition, to clarify the inflection points, we apply Savitzky-golay filter to the original datasets. To validate and verify the performance of the proposed segmentation, the dataset collected from an aircraft engine (provided by NASA prognostics center) is used to fault pattern extraction. As a result, the proposed adjustable time segmentation shows better performance in fault pattern extraction.

• 한국식품영양과학회지
• /
• 제19권1호
• /
• pp.61-64
• /
• 1990

The influence of extraction time on the fatty acid profile and the contents of calcium and magnesium in pig's shank were examined. The 9 kinds of fatty acid were identified in water extracts from pig's shank by GLC. The profiles of fatty acids from different extraction were similer to each other,. The content of linolenic acid was increased after two-hours extraction however the amounts of MUFA, PUFA and p/s ratio were decreased by the longer extraction time. The amount of calcium was 124.7mg% in raw materials but water extracts and bone powder samples showed higher values. in case of magnesium it was 138.4mg% in raw materials, but the extracts showed lower amount and bone powder exhibited higher values.

• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.465-470
• /
• 2006

Walnut hull is a by-product from the Walnut tree, used as natural dyestuff from ancient times. This study was done to examine the effects of extractive conditions on the properties of walnut hull extracts for making efficient use of the walnut hull as a natural colorant. Aqueous extracts of walnut hull were prepared at various extractive concentration, temperature and time. Then they were characterized using UV-Vis. Spectrophotometer, FT-IR Spectrometer, Prep Liquid Chromatography, and Energy dispersive X-ray spectrometer. The aqueous extracts have two absorbency peaks of UV-Vis. Spectrum, shoulder type peak in the range of 270-280 nm and broad type band around 420 nm. Intensity of absorbency is increased with increase of extraction concentration and time. However, Boiling temperature extraction method showed the most efficiency of all. Intensity of absorbency is also affected by extraction pH. The Prep LC examined two kinds of isolated colorant with different molecular weight. FT-IR spectra of hull extracts showed an absorption band around $3400cm^{-1}$, the peaks at $1700-1600cm^{-1}$, which are characteristic of aromatic compounds with unsaturated ketone and benzene ring. It showed that the extraction contained some mineral ions, such as K, Ca, Si, Mg.

• 한국식품저장유통학회지
• /
• 제14권1호
• /
• pp.73-77
• /
• 2007

진달래 화분의 다양한 이용성과 기능성에 관한 연구를 위한 기초연구의 일환으로 추출조건별 이화학적 특성을 조사하였다. 페놀성 화합물과 DPPH에 의한 전자공여능은 물보다 80%에탄올이 우수하였으며, 용매비에 따른 페놀성 화합물과 전자공여능은 용매비가 20배에서 높은 것으로 나타났다. 추출온도에 따른 페놀성 화합물은 $45^{\circ}C$에서 347.60 mg%로 높게 나왔으며, 전자공여능은 $25^{\circ}C$에서 67.93%로 높게 나타났다. 추출시간에 따른 페놀성 화합물의 추출물은 6시간동안 추출한 추출물이 312.63 mg%로 가장 높았으며, 전자공여능은 추출시간에 따라 크게 차이가 나지 않았으나, 바로 추출하였을 때 가장 높게 나타났다. 추출 횟수에 따른 페놀성 화합물의 단위당 추출물과 전자공여능은 2회 추출이 높은 것으로 나타났다. 따라서 진달래 화분의 추출물은 페놀성 화합물과 DPPH에 의한 전자공여 활성은 용매비 20배, 추출온도 $25{\sim}45^{\circ}C$, 추출횟수 2회, 추출시간 6시간에서 전반적으로 우수한 것으로 나타났다.