• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제25권1호
• /
• pp.20-26
• /
• 2015

Objectives: To evaluate the biodurability of Korean Chrysotile(KC), the changes in fibers numbers and changes in the element composition of fibers from the lung of Sprague-Dawley rats instilled KC(average size $4.74{\mu}m$, $59,043{\times}10^6$ fibers/mg) was estimated. Methods: Rats were administered 1 mg KC(low group) or 2 mg KC(high group) by a single intratracheal instillation. At each time point(5 days, 5 weeks, 10 weeks), the numbers of KC fibers and the changes of element composition(atomic %) of KC fibers from the lung of the rats were analyzed with transmission electron microscope equipped with energy dispersive X-ray spectrometer. Results: Over time, the number of fibers within the lungs of animals were reduced. The average length of the low and high group is significantly reduced from 5 days after administration. Over time, the fiber ratio of at least $5{\mu}m$ remaining in the lung tissue of the low concentration group was up but the high group was reduced. From day 5 after administration, the composition ratio(Mg) was significantly decreased in all groups. Conclusions: Size and composition of Korean Chrysotile in the lung tissue of rats was changed from 5 days.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.773-778
• /
• 2018

In-situ transesterification of microalgae lipids using microwave irradiation has potential to simplify and accelerate biodiesel production, as it minimizes production cost and reaction time by direct transesterification of microalgae into biodiesel with microwave as a heating source. This study was conducted to research the effect of microwave irradiation with in-situ transesterification of microalgae under base catalyst condition. The process variables (reaction time, solvent ratio, microwave power) were studied using 2% of catalyst concentration. The maximum yield of FAME was obtained at about 32.18% at the reaction time of 30 min with biomass-methanol ratio 1:12 (w/v) and microwave power of 450 W. The GC MS analysis obtained that the main component of FAME from microalgal oils (or lipids) was palmitic acid, stearic acid and oleic acid. The results show that microwaves can be used as a heating source to synthesize biodiesel from microalgae in terms of major components resulting.

• Journal of Forest and Environmental Science
• /
• 제31권1호
• /
• pp.1-6
• /
• 2015

Microwave assisted biodiesel production from crude Pongamia pinnata oil using homogeneous base catalyst (KOH) was unsuccessful because of considerable soap formation. Therefore, a two step process of biodiesel production from high free fatty acid (FFA) oil was investigated. In first step, crude P. pinnata oil was acid catalyzed using $H_2SO_4$ and acid value of oil was reduced to less than 4 mg KOH/g. Effect of sulfuric acid concentration, alcohol-oil molar ratio and microwave irradiation time on acid value of oil was studied. Result suggested that 1.5% $H_2SO_4$ (w/w), 6:1 methanol oil molar ratio and 3 min microwave irradiation time was sufficient to reduce the acid value of oil from 12 and 22 mg KOH/g to 2.9 and 3.9 mg/KOH/g, respectively. Oil obtained after pretreatment was subsequently used for microwave assisted alkali catalyzed transesterification. A higher biodiesel yield (99.0%) was achieved by adopting two step processes. Microwave energy efficiency during alkali catalyzed transesterification was also investigated. The results suggested a significant energy saving because of reduced reaction time under microwave heating.

• Computers and Concrete
• /
• 제31권3호
• /
• pp.197-206
• /
• 2023

In this paper, the bending performance of a MSFRHPC (containing steel fiber, polyvinyl alcohol (PVA) fiber, and CW)-reinforced beam was studied for the first time. Introducing a multiscale fiber system increased the first crack load (up to 150%), yield load (up to 50%), and peak load (up to 15%) of reinforced beams. The multiscale fiber system delays cracking of the reinforced beam, reduces crack width of the reinforced beam in normal use, and improves the durability of the beam. Considering yield load and peak load, the reinforcing effect of multiscale fiber on the high-reinforcement ratio beam (1.00%) is better than that on the low-reinforcement ratio beam (0.57%). Introducing fibers slowed the development of cracks in the reinforced beam under bending. With the added hybrid fiber, the deformation concentration of reinforced beams after yield was more significant with concentration in 1 or 2 cracks. A model for predicting the flexural capacity of MSFRHPC-reinforced beams was proposed, considering the action of multiscale hybrid fibers. This research is helpful for structure application of MSFRHPC-containing CW.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권9호
• /
• pp.1468-1472
• /
• 2007

The present study was carried out to determine the optimum conditions of different factors (ratio of lard to water, ${\beta}$-CD concentrations, mixing temperature, mixing time and mixing speed) on cholesterol reduction from lard by using crosslinked ${\beta}$-CD. Crosslinked ${\beta}$-CD was prepared with adipic acid. When the lard was treated under different conditions, the range of cholesterol removal was 91.2 to 93.0% with 5% crosslinked ${\beta}$-CD, which was not significantly different among treatments. In a recycling study, cholesterol removal with crosslinked ${\beta}$-CD in the first trial was 92.1%, which was similar to that with new crosslinked ${\beta}$-CD. In up to eight time trials, over 90% of cholesterol removal was found. The present study indicated that the optimum conditions for cholesterol removal using crosslinked ${\beta}$-CD were a 1:3 ratio of lard to water, 5% crosslinked ${\beta}$-CD concentration, $40^{\circ}C$ mixing temperature, 1 h mixing time and 150 rpm mixing speed. In addition, crosslinked ${\beta}$-CD made by adipic acid resulted in an effective recycling efficiency.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제16권3호
• /
• pp.109-116
• /
• 2012

This study investigated the effects of blast furnace slag mortars activated with sodium hydroxide(NaOH) and gypsum in relation to flow, setting time and compressive strength. The parameters in this studied was the gypsum ratio 0 to 50%, 3M and 6M of activator concentration and $20{\pm}2^{\circ}C$ and $35{\pm}2^{\circ}C$ of curing temperatures. The results of flow was increase, setting time was increase as the amount of gypsum increases. But the results of compressive strength was dependent on the gypsum ratio, indicating that the compressive strength increased with the increase of the amount of gypsum until a certain limit, beyond which the strength decreased quickly.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.31-38
• /
• 2020

Soil-cement stabilization is a type of ground improvement method which has been used to improve the engineering properties of soil. The unconfined compression test is the commonly used method to evaluate the quality of the stabilized soil due to its simplicity, reliability, rapidity and cost-effectiveness. The main objective of this study was to evaluate the effect of recovered carbon black (rCB) on the strength characteristic of cement-stabilized sand. Various rCB contents and water to cement ratios (w/c) were examined. The unconfined compression test on stabilized sand with different curing times was also conducted for a reconstituted specimen. From the test result, it was found that the compressive strength of cement-stabilized sand increased with the increase of the rCB content up to 3% and the curing time and with the decrease of the w/c ratio, showing that the optimum rCB concentration of the tested stabilized sand was around 3%. In addition, a prediction equation was suggested in this study for cement-stabilized sand with rCB as a function of the w/c ratio and rCB concentration at 14 and 28 days of curing.

• Archives of Pharmacal Research
• /
• 제26권8호
• /
• pp.644-648
• /
• 2003

To investigate the feasibility of developing a new ondansetron transdermal system, the effects of vehicles and penetration enhancers on the in vitro permeation of ondansetron hydrochloride (OS) from a pressure-sensitive adhesive (PSA) matrices across dorsal hairless mouse skin were studied. Vehicles employed in this study consisted of various ratios of propylene glycol monocaprylate (PGMC)-diethylene glycol monoethyl ether (DGME) co-solvents and PGMC-propylene glycol (PG) co-solvents with 3% oleic acid. $Duro-Tak^\circledR$ 87-2100 and $Duro-Tak^\circledR$ 87-2196 were used as PSAs. The concentration of DGME in PGMC-DGME co-solvent system affected the release rate; as the concentration of DGME increased, the release rate decreased. The cumulative release amount of OS increased as the ratio of PSA to drug solution decreased. The permeation flux was also primarily affected by the amount of PSAs; as the amount decreased, the permeation flux increased. The overall fluxes from matrix formulations were significantly lower when compared to those obtained from solution formulations. The ratio of PG to PGMC did not affect permeation flux, while the lag time decreased significantly from $5.14\pm3.31 to 0.31\pm0.12$ h as the PG increased from 40% to 60%.

• Journal of Korean Society of Water and Wastewater
• /
• 제8권1호
• /
• pp.44-52
• /
• 1994

The purpose of this experimental research was focused to improve the quality of the effluent and the yielded sludge when the papermill wastewater was treated by the indirect aerated submerged biofilter as a second treatment method of papermill wastewater. Changing the various experimental factors(Nutrient additions or not, HRT, F/M ratio, recirculation ratio, etc) with indirect aerated biofilter, the results obtained are as follows. 1. Because of the microbes concentration could be sustained to $9,000mg/l$ in submerged biofilter and then the volumetric organic loads could be increased to $2.7kg-BOD/m^3/day$(that of activated sludge is $0.8kg-BOD/m^3/day$), the reactor volume can be reduced to one third of the activated sludge treatment. 2. Because of the yield coefficient(Y) and the endogenous decay coefficient(kd) were revealed 0.4 and 0.07/d, the yielded sludge volume was reduced by for compared with that of the activated sludgg process. 3. The concentration of the sloughed sludge in the reactor was 2.62~4.01%, so the thickener could be omitted in the papermill wastewater sludge treatment process. 4. When the operating was conducted at HRT of 4hrs, the treatment efficiencies of BOD and COD were obtained 80% and 70%, Therefore operating time can be reduced to one half of the activated sludge treatment.

• Journal of Korean Institute of Industrial Engineers
• /
• 제42권2호
• /
• pp.138-150
• /
• 2016

This study aims to analyze the structure and characteristics of the domestic online game industry using network analysis. In particular, two-mode network analysis is employed to measure the network structure, centrality, and cluster for two types of online game platforms, online games and mobile games, from 1996 to 2014. We also conduct a dynamic analysis to capture the structural changes in the ecosystem by internal and external environmental changes before and after turning point for each online game platform. It is revealed that the online game econsystem has the higher number of clusters and higher concentration ratio than those of mobile game ecosystem. In dynamic analysis, both platforms exhibit similar trends over time with the increasing number of clusters, enlargement of largest cluster's size, and decreasing concentration ratio. This study is expected to provide fruitful implications for strategic decision making of online game companies and policy making for the online game industry.