• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.14-15
• /
• 2006

A saturation of magnetic flux in the core may occur when a large primary current flows when the iron-cored current transformer is used. This saturation makes the distorted secondary current of the CT. the distorted secondary current may cause the mal-operation or operation time delay of protective relays. CT compensation algorithm using The LSQ(Least Square) fitting method has a problem. It needs to acquire enough data for executing this algorithm without an error. In this paper, an enhanced algorithm using interpolation based LSQ(Least Square) Fitting Method is proposed. The Lagrange Interpolation Method is used for the interpolation and CT is simulated by EMTP. The results show that the proposed algorithm can accurately compensate a distorted secondary current more than existing Algorithm when the saturation severely occurs.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.67-73
• /
• 2004

The purpose of this study is to analyze the vibration signal of the revolution machine using the STFT(Short Time Fourier Transform). It is common to analyze the frequency of signal through FFT algorithm with the fixed sampling rate. However, in this situation the order spectrum information useful rather than the general frequency information with the fixed sampling rate. In this paper, the resampling technique was used for getting the information of order spectrum. In resampling process, the arithmetic amount and MSE(Mean Square Error) for various kinds of the signal interpolation was compared and presented the propriety of the interpolation method while developing analysis equipment. Order tracking was implemented using signal interpolation method which it has selected. Then the analyzed results were obtained through simulation using the STFT technique.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1750-1754
• /
• 2013

A variable bit rate speech coder is presented. The coder is based on the observation that a speech signal can be viewed as a combination of piecewise linear signals in a short time period. The encoder detects the sample points where the slope of the signal changes, which are called the inflection points in this paper. The coder transmits the location and value for the detected inflection sample, but only the location information for the noninflection samples. In the decoder, the noninflection samples are estimated with interpolation of the received information. Several factors affecting the performance of the coder have been tested through simulation. Simulation results show that the linear interpolation produces 1 ~ 5 dB improvement over the cubic spline interpolation. And the -law companding does not provide any benefit when it is applied before the inflection detection. With low threshold values in the inflection point detection, the coder shows better MOS and more than 16 dB improvement in SNR compared to the continuously variable slope delta modulation (CVSDM).

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.67-72
• /
• 2006

There are many modelling methods using theoretical and experimental data. Recently, fractal interpolation methods have been widely used to estimate and analyze various data. Due to the chaotic nature of dynamic roundness profile data in roundness some desirable method must be used for the analysis which is natural to time series data. Fractal analysis used in this paper is within the scope of the fractal interpolation and fractal dimension. Also, two methods for computing the fractal dimension has been introduced which can obtain the dimension of typical dynamic roundness profile data according to the number of data points in which the fixed data are generally lower than 200 data points. This fractal analysis result shows a possible prediction of roundness profile that has some different roundness profile in round shape operation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.126-131
• /
• 1999

Up until now, it is said that no satisfactory computer solutions have been found for synthesizing four-bar linkage based on the prescribed coupler link curve. In our study, an algorithm has been developed to improve the design synthesis of four-bar linkage automatically generating prescribed path by using B-spline interpolation. The suggested algorithm generates the desired coupler curve by using B-spline interpolation, and hence the generated curve approximates as closely as to the desired curve representing coupler link trajectory. Also, when comparing each generated polygon with the control polygon, rapid comparison by applying convex hull concept. finally, optimization process using ADS is incorporated into the algorithm based on the 5 precision point method to reduce the total optimization process time. As for examples, three different four-bar linkages were tested and the results showed the effectiveness of the algorithm.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.29-33
• /
• 2007

In order to protect the environment from the refrigerant pollution, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be different because of $CO_2$'s unique properties as a refrigerant. Especially, the high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. In this study, the high-side pressure setpoint algorithm was developed by using a neural network and a Lagrange interpolation method. These methods were compared. Simulation results showed that a Lagrange interpolation method was more effective than a neural network in the respect of its easiness of programming and shorter execution time.

• Ocean Systems Engineering
• /
• v.9 no.2
• /
• pp.179-190
• /
• 2019

This paper deals with the problem of the global stabilization for a class of ocean structure systems. It is well known that, in general, the global asymptotic stability of the ocean structure subsystems does not imply the global asymptotic stability of the composite closed-loop system. The classical fuzzy inference methods cannot work to their full potential in such circumstances because given knowledge does not cover the entire problem domain. However, requirements of fuzzy systems may change over time and therefore, the use of a static rule base may affect the effectiveness of fuzzy rule interpolation due to the absence of the most concurrent (dynamic) rules. Designing a dynamic rule base yet needs additional information. In this paper, we demonstrate this proposed methodology is a flexible and general approach, with no theoretical restriction over the employment of any particular interpolation in performing interpolation nor in the computational mechanisms to implement fitness evaluation and rule promotion.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.56-63
• /
• 2007

A color gamut mapping has been known to be one of promising methods to enhance display quality of various types of color display device. However, it is required to handle this mapping in real time for display or digital TV application. If carefully arranged, the tetrahedral interpolation can be computed with simpler operations compared to a cubic interpolation in the conventional reduced resolution look-up table which is devised to process the gamut mapping in real time. Based on the tetrahedral interpolation, a new type hardware architecture for real-time gamut mapping is proposed in this paper. The proposed hardware architecture shows better processing speed and reduces the hardware cost.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.333-341
• /
• 2008

In this paper, a new interpolation model for the head related transfer function (HRTF) was proposed. In the method herein, we assume that the impulse response of the HRTF for each azimuth angle is given by linear interpolation of the time-delayed neighboring impulse responses of HRTFs. The time delay of the HRTF for each azimuth angle is given by sum of the sound wave propagation time from the ears to the sound source, which can be estimated by using azimuth angle, the physical shape of the underlying head and the distance between the head and sound source, and the refinement time yielding the minimum mean square error. Moreover, in the proposed model, the interpolation intervals were not fixed but varied, which were determined by minimizing the total number of HRTFs while the synthesized signals have no perceptual difference from the original signals in terms of sound location. To validate the usefulness of the proposed interpolation model, the proposed model was applied to the several HRTFs that were obtained from one dummy-head and three human heads. We used the HRTFs that have 5 degree azimuth angle resolution at 0 degree elevation (horizontal plane). The experimental results showed that using only $30\sim40%$ of the original HRTFs were sufficient for producing the signals that have no audible differences from the original ones in terms of sound location.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.1
• /
• pp.68-79
• /
• 2014

Human model simulation has been widely used in various industrial areas such as ergonomic design, product evaluation and characteristic analysis of work-related musculoskeletal disorders. However, the process of building digital human models and capturing their behaviors requires many costly and time-consuming fabrication iterations. To overcome the limitations of this expensive and time-consuming process, many studies have recently presented a markerless motion capture approach that reconstructs the time-varying skeletal motions from optical devices. However, the drawback of the markerless motion capture approach is that the phenomenon of occlusion of motion data occurs in real-time human simulation. In this study, we propose a systematic method of discriminating missing or inaccurate motion data due to motion occlusion and interpolating a sequence of motion frames captured by a markerless depth camera.