• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.981-987
• /
• 2019

In this paper, we propose a new SC-FDE (single carrier frequency domain equalization) structure to cope with narrow band interference signals or jammers and reduce pilot overhead. The conventional SC-FDE structure has a problem that the receiver performance degrades severely due to difficulty in time-domain channel estimation when narrow band jammers exist. In addition, the spectral efficiency is lowered by transmitting pilot at every SC-FDE block to estimate channel response. In order to overcome those problems, the proposed structure is devised to estimate frequency domain channel directly without time domain channel estimation. To reduce the pilot overhead, several data blocks are transmitted between two pilots. The channel estimate of each data block is found through linear interpolation of two channel estimates at two pilots. By performing frequency domain channel equalization using this channel estimate, the distortion by the channel is well compensated when narrow band jammers exist. The performance of the proposed structure is confirmed by computer simulation.

• Communications for Statistical Applications and Methods
• /
• v.29 no.5
• /
• pp.499-512
• /
• 2022

Intervention measures have been implemented worldwide to reduce the spread of the COVID-19 outbreak. The COVID-19 outbreak has occured in several waves of infection, so this paper is divided into three groups, namely those countries who have passed the pandemic period, those countries who are still experiencing a single-wave pandemic, and those countries who are experiencing a multi-wave pandemic. The purpose of this study is to develop a multi-wave Richards model with several changepoint detection methods so as to obtain more accurate prediction results, especially for the multi-wave case. We investigated epidemiological trends in different countries from January 2020 to October 2021 to determine the temporal changes during the epidemic with respect to the intervention strategy used. In this article, we adjust the daily cumulative epidemiological data for COVID-19 using the logistic growth model and the multi-wave Richards curve development model. The changepoint detection methods used include the interpolation method, the Pruned Exact Linear Time (PELT) method, and the Binary Segmentation (BS) method. The results of the analysis using 9 countries show that the Richards model development can be used to analyze multi-wave data using changepoint detection so that the initial data used for prediction on the last wave can be determined precisely. The changepoint used is the coincident changepoint generated by the PELT and BS methods. The interpolation method is only used to find out how many pandemic waves have occurred in given a country. Several waves have been identified and can better describe the data. Our results can find the peak of the pandemic and when it will end in each country, both for a single-wave pandemic and a multi-wave pandemic.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.122-129
• /
• 2022

In this paper, we propose a method to improve the performance of Transformer-based speech recognizers using data augmentation that locally adjusts the frame rate. First, the start time and length of the part to be augmented in the original voice data are randomly selected. Then, the frame rate of the selected part is changed to a new frame rate by using linear interpolation. Experimental results using the Wall Street Journal and LibriSpeech speech databases showed that the convergence time took longer than the baseline, but the recognition accuracy was improved in most cases. In order to further improve the performance, various parameters such as the length and the speed of the selected parts were optimized. The proposed method was shown to achieve relative performance improvement of 11.8 % and 14.9 % compared with the baseline in the Wall Street Journal and LibriSpeech speech databases, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.526-533
• /
• 2009

This paper proposes a formant synthesis method of Haegeum sounds using cepstral envelope for spectral modeling. Spectral modeling synthesis (SMS) is a technique that models time-varying spectra as a combination of sinusoids (the "deterministic" part), and a time-varying filtered noise component (the "stochastic" part). SMS is appropriate for synthesizing sounds of string and wind instruments whose harmonics are evenly distributed over whole frequency band. Formants extracted from cepstral envelope are parameterized for synthesis of sinusoids. A resonator by Impulse Invariant Transform (IIT) is applied to synthesize sinusoids and the results are bandpass filtered to adjust magnitude. The noise is calculated by first generating the sinusoids with formant synthesis, subtracting them from the original sound, and then removing some harmonics remained. Linear interpolation is used to model noise. The synthesized sounds are made by summing sinusoids, which are shown to be similar to the original Haegeum sounds.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.1-10
• /
• 2014

In this paper, we propose MPI gridding algorithm of LiDAR data that minimizes the communication between the cores. The LiDAR data collected from aircraft is a 3D spatial information which is used in various applications. Since there are many cases where the LiDAR data has too high resolution than actually required or non-surface information is included in the data, filtering the raw LiDAR data is required. In order to use the filtered data, the interpolation using the data structure to search adjacent locations is conducted to reconstruct the data. Since the processing time of LiDAR data is directly proportional to the size of it, there have been many studies on the high performance parallel processing system using MPI. However, previously proposed methods in parallel approach possess possible performance degradations such as imbalanced data size among cores or communication overhead for resolving boundary condition inconsistency. We conduct empirical experiments to verify the effectiveness of our proposed algorithm. The results show that the total execution time of the proposed method decreased up to 4.2 times than that of the conventional method on heterogeneous clusters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.15-23
• /
• 2016

To support the telematics and infotainment services, vehicle-to-everything (V2X) communication requires a robust and reliable network. To do this, the 3rd Generation Partnership Project (3GPP) has recently developed V2X communication. For reliable communication, accurate channel estimation should be done. However, because vehicle speed is very fast, radio channel is rapidly changed with time. Therefore, it is difficult to accurately estimate the channel. In this paper, we propose the new linear minimum mean square error (LMMSE) channel interpolation scheme based on the Long Term Evolution (LTE) sidelink system in vehicle-to-vehicle (V2V) environments. In our proposed reduced decision error (RDE) channel estimation scheme, LMMSE channel estimation is applied in the pilot symbol, and then in the data symbol, smoothing and LMMSE channel interpolation scheme is applied. After that, time and frequency domain averaging are applied to obtain the whole channel frequency response. In addition, the LMMSE equalizer of the receiver side can reduce the error propagation due to the decision error. Therefore, it is possible to detect the reliable data. Analysis and simulation results demonstrate that the proposed scheme outperforms currently conventional schemes in normalized mean square error (NMSE) and bit error rate (BER).

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.241-249
• /
• 2006

Due to the long tectonic history and the very complex geologic formations in Korea, the anisotropic characteristics of subsurface material may often change very greatly and locally. The algorithms commonly used, however, may not give sufficiently precise computational results of traveltime data particularly for the complex and strong anisotropic model, since they are based on the two-dimensional (2D) earth and/or weak anisotropy assumptions. This study is intended to develope a three-dimensional (3D) modeling algorithm to precisely calculate the first arrival time in the complex anisotropic media. Considering the complex geology of Korea, we assume 3D TTI (tilted transversely isotropy) medium having the arbitrary symmetry axis. The algorithm includes the 2D non-linear interpolation scheme to calculate the traveltimes inside the grid and the 3D traveltime mapping to fill the 3D model with first arrival times. The weak anisotropy assumption, moreover, can be overcome through devising a numerical approach of the steepest descent method in the calculation of minimum traveltime, instead of using approximate solution. The performance of the algorithm developed in this study is demonstrated by the comparison of the analytic and numerical solutions for the homogeneous anisotropic earth as well as through the numerical experiment for the two layer model whose anisotropic properties are greatly different each other. We expect that the developed modeling algorithm can be used in the development of processing and inversion schemes of seismic data acquired in strongly anisotropic environment, such as migration, velocity analysis, cross-well tomography and so on.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.576-583
• /
• 2008

In this study, we attempt to design a real-time autonomic nervous system(ANS) evaluation system usable during exercise using heart instantaneous frequency(HIF). Although heart rate variability(HRV) is considered to be a representative signal widely used ANS evaluation system, the R-peak detection process must be included to obtain an HRV signal, which involves a high sampling frequency and interpolation process. In particular, it cannot accurately evaluate the ANS using HRV signals during exercise because it is difficult to detect the R-peak of electrocardiogram(ECG) signals with exposure to many noises during exercise. Therefore, in this study, we develop the ground for a system that can analyze an ANS in real-time by using the HIF signal circumventing the problem of the HRV signal during exercise. First, we compare the HRV and HIF signals in order to prove that the HIF signal is more efficient for ANS analysis than HRV signals during exercise. Further, we performed real-time ANS analysis using HIF and confirmed that the exerciser's ANS variation experiences massive surges at points of acceleration and deceleration of the treadmill(similar to HRV).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1418-1425
• /
• 2003

In CAD systems, a surface to be machined is expressed by a series of curves, such as B-spline, Bezier and NURBS curves, which compose the surface and then in CAM systems the curves are divided into a large number of line or arc segments. These divided movement commands, however, cause many problems including their excessive size of NC data that makes almost impossible local adjustment or modification of the surface. To cope with those problems, the necessity of real-time curve or surface interpolators was embossed. This paper presents an efficient real-time tool-path generation method fur interpolation of NURBS surfaces in CNC machining. The proposed tool-path generation method is based on an improved iso-scallop strategy and can provide better precision than the existing methods. The proposed method is designed such that tool-path planning is easily managed in real-time. It proposed a new algorithm for regulation of a scallop height, which can efficiently generate tool-paths and can save machining time compared with the existing method. Through computer simulations, the performance of the proposed method is analyzed and compared with the existing method in terms of federate, total machining time and a degree of constraint on the scallop height.

• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.215-241
• /
• 2003

In this paper, solute transport in heterogeneous aquifers using a modified Fokker-Planck equation (MFPE) is investigated. This newly developed mathematical model is characterised with a time-, scale-dependent dispersivity. A two-dimensional finite volume quadrilateral mesh method (FVQMM) based on a quadrilateral background interpolation mesh is developed for analysing the model. The FVQMM transforms the coupled non-linear partial differential equations into a system of differential equations, which is solved using backward differentiation formulae of order one through five in order to advance the solution in time. Three examples are presented to demonstrate the model verification and utility. Henry's classic benchmark problem is used to show that the MFPE captures significant features of transport phenomena in heterogeneous porous media including enhanced transport of salt in the upper layer due to its parameters that represent the dependence of transport processes on scale and time. The time and scale effects are investigated. Numerical results are compared with published results on the some problems.