• Journal of electromagnetic engineering and science
• /
• v.8 no.4
• /
• pp.139-143
• /
• 2008

In this paper, a new scheme to calculate the weighting factor of the 2-D isotropic-dispersion finite difference time domain(ID-FDTD) is proposed. The weighting factor in [1] was formulated in free space, so that it may not be optimal in dielectric media. Therefore, the weighting factor was reformulated by considering the material properties and using the least mean square method. As a result, a minimum numerical dispersion error for any dielectric media is guaranteed.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1E
• /
• pp.38-42
• /
• 2000

In this paper we studied the reduced subjective timbre space of time-varying tones as well as steady state tones. 45 modified test tones were constructed from the original violin tone in consideration of 4 physical factors: spectrum envelope, inharmonicity, time-varying spectrum and time reversal. The semantic differential (SD) method was used in the listening test. According to the factor analysis, the adjectives can be factorized into 4 groups. The first factor is characterized by the adjectives, 'free', 'broad', 'deep', 'rich', 'strong' and 'reverberant', the second by 'tenor', 'clear', 'bright', 'light' and 'sharp', the third by 'easy', 'smooth', and 'solid', the fourth by 'warm' and 'full'. The first factor, 'richness', seems to be dependent upon the time-varying characteristic of a tone. The second factor, 'sharpness', is shown to play an important role in a time-varying tone as well as in a steady state tone.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.435-439
• /
• 2007

This paper deals with RLS algorithm using Newton-Raphson method based adaptive forgetting factor for a passive telemetry RF sensor system in order to estimate the time variant parameter to be included in RF sensor model. For this estimation with RLS algorithm, phasor typed RF sensor system modelled with inductive coupling principle is used. Instead of applying constant forgetting factor to estimate time variant parameter, the adaptive forgetting factor based on Newton-Raphson method is applied to RLS algorithm without constant forgetting factor to be determined intuitively. Finally, we provide numerical examples to evaluate the feasibility and generality of the proposed method in this paper.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.341-354
• /
• 2011

Analyzing the relationships among the parameters for quantifying the quality of research published in journals is a challenging task. In this paper, we analyze the relationships between the impact factor, h-index, and g-index of a journal. To keep our analysis simple and easy to understand, we consider a generalized version of the impact factor where there is no time window. In the absence of the time window, the impact factor converges to the number of citations received per paper. This is not only justified for the impact factor, it also simplifies the analysis of the h-index and g-index as well because addition of a time window in the form of years complicates the computation of indices too. We derive the expressions for the relationships among impact factor, h index, and g-index and validate them using a given set of publication-citation data.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.161-166
• /
• 2004

The impact factor of bridges is analyzed based on experimental data to examine the characteristics of the dynamic responses of bridges. The experimental impact factors are compared with the impact factor of Korean Highway Design Specification and Japan T-load in terms of the span length. According to the superstructural types of bridges, the variation of the impact factor is analyzed. When vehicles are passing on a bridge, the dynamic effect acts on the bridge impact factor more than at the time of design because of the velocity of vehicles, the surface roughness reduction due to the deterioration of the bridge deck pavement, and the disconnection of the bridge entrance and the expansion joint. Because the actual value is greater than the expected value at the time of design, the dynamic response of the bridge accelerates the deterioration of the bridge due to the accumulation of fatigue, and the bridge's life-time is shortened and can have an influence on the serviceability and safety of the bridge.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.55-61
• /
• 2011

We propose power-saving real-time scheduling method for mixed task sets which consist of both time-based periodic and event-based aperiodic tasks in the automotive operating system. In this system, we have to pursue maximization of power-saving using the slack time estimation and minimization of response time of aperiodic tasks simultaneously. However, since these two goals conflict each other, one has to make a compromise between them according to the given application domain. In this paper, we find the adjustment factor which gives better response time of aperiodic tasks with slight power consumption increase. The adjustment factor denotes the gravity of response time for aperiodic tasks. We apply the ccEDF scheduling for time-based periodic tasks and then calculate new utilization to be applied to the adjustment factor. In this paper, we suggest the lccEDF algorithm to make a tradeoff between the two goals by systematically adjusting the factor. Simulation results show that our approach is excellent for variety of task sets.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.97-110
• /
• 2021

This study estimated the delay factor, which is the ratio of travel time at the speed limit and travel time at the actual speed using real-time traffic information in Seoul. The actual travel speed on the road was lower than the maximum speed of the road and the travel speed was the slowest during the rush hour. As a result of accessibility analysis based on travel speed during the rush hour, the travel time at the actual speed was 37.49 minutes on average. However, the travel time at the speed limit was 15.70 minutes on average. This result indicated that the travel time at the actual speed is 2.4 times longer than that at the speed limit. In addition, this study proposedly defined the delay factor as the ratio of accessibility by the speed limit and accessibility to actual travel speed. As a result of delay factor analysis, the delay factor of Seoul was 2.44. The results by the administrative district showed that the delay factor in the north part areas of the Han River is higher than her south part areas. Analysis results after applying the relationship between road density and traffic volume showed that as the traffic volume with road density increased, the delay factor decreased. These results indicated that it could not be said that heavy traffic caused longer travel time. Therefore, follow-up research is needed based on more detailed information such as road system shape, road width, and signal system for finding the exact cause of increased travel time.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.384-392
• /
• 2018

A multiple-output LDO regulator is a good choice in terms of the efficiency in embedded systems requiring various supply voltages. A small feedback factor in LDO incurs the long settling time, resulting in large ripples in the time-multiplexing strategy. A new proposed topology enhances the settling time, and hence the ripples by incorporating the constant feedback factor with different reference voltages. The simulation results of a prototype design in a standard $0.35{\mu}m$ CMOS process verify that the proposed strategy enhances the settling time and ripple characteristic by more than doubled than a conventional circuit using the feedback factor of less than 0.4.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.470-474
• /
• 1998

In this paper, to estimate the time-varying parameters of speech signal, we use the robust sequential estimator based on t-distribution and, for time-varying signal, introduce the forgetting factor. By using the RSE based on t-distribution with small degree of freedom, we can alleviate efficiently the effects of outliers to obtain the better performance of parameter estimation. Moreover, by the forgetting factor, the proposed algorithm can estimate the accurate parameters under the rapid variation of speech signal.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.176-181
• /
• 2002

The continuous Gabor wavelet transform (GWT) has been utilized as a useful time-frequency analysis tool to identify the rapidly-varying characteristics of some wave signals. In the application of GWT, it is important to select the Gabor wavelet with the optimal shape factor by which the time-frequency distribution of a signal can be accurately estimated. To find the signal-dependent optimal Gabor wavelet shape factor, the notion of the Shannon entropy which mesures the extent of signal energy concentration in the time-frequency plane is employed. To verify the validity of the present entropy-based scheme, we have applied it to the time-frequency analysis of a set of elastic bending wave signals generated by an impact in a solid cylinder.