• 가정과삶의질연구
• /
• 제13권4호
• /
• pp.165-180
• /
• 1995

The purpose of this study was to investigate the influences of family life cycle stages and perceived time pressure on strategies for coping with time constraints in housewife-teachers. The subjects of this study were 570 married women teachers who live with their husebands and children in junior and senior high schools in Taegu, A questionaire was used as survey method. Factor analysis and MANOVA were employed for data analysis and Scheffe test forpost-hoc analysis. The main findings were : First the effect of family life cycle stages on the use of personal time reducing strategies was different according to perceived time pressure. Second the effect of perceived time pressure on the use of personal time reducing strategies differed according to family life cycle stages. Third the use of strategies for coping with time contratins was found to be significantly different according to family life cycle stages, Forth there were significant differences in the use of strategies for coping with time constrainsts according to perceived time pressure.

• 환경생물
• /
• 제34권4호
• /
• pp.365-373
• /
• 2016

환경생태 자료 분석에 사용된 많은 자료가 시간에 따라 얻어지고 있다. 조사된 시점의 수가 적은 경우에는 자료가 충분한 정보를 주지 않기 때문에 반복 측정하거나 여러 지점을 조사하여 종합적인 분석을 수행하게 된다. 이때 사용하는 방법이 경시적 자료 분석(longitudinal data analysis) 또는 혼합모형(mixed model) 분석이다. 그러나 시점의 수가 많아 정보의 양이 충분하다면 반복적인 자료가 필요하지 않으며 이러한 자료는 시계열 분석 기법을 이용하여 분석하게 된다. 특히 현재와 같이 다수의 시점에서 얻어진 자료의 수가 많아지고 있는 상항에서 각 변수 간에 서로 어떤 영향을 주는지 또는 향후 어떤 경향을 띠게 되는지 예측을 원한다면 시계열 분석 기법을 사용하여 자료를 분석해야 한다. 본 연구에서는 단변량 시계열 분석(univariate time series analysis), 개입 분석(intervention time series model), 전이함수 모형 분석(transfer function model), 다변량 시계열 분석(multivariate time series model) 기법을 소개하고 현재까지 진행된 국내외 연구 논문을 살펴보았다. 또한 향후 환경생태 자료 분석에서 중요하게 사용될 수 있는 오차수정 모형(error correction model)을 소개하였다.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1433-1441
• /
• 2009

In multibody dynamic analysis, one of the most important problems is to reduce computation times for real-time simulation. This paper presents the derivation procedure of equations of motion of a 6${\times}$6 autonomous vehicle in terms of chassis local coordinates which do not require coordinates transformation matrix to enhance efficiency for real-time dynamic analysis. Also, equations of motion are derived using the VT(velocity transformation) technique and symbolic computation method coded by MATLAB. The Jacobian matrix of the equations of motion of a system is derived from symbolic operations to apply the implicit integration method. The analysis results were compared with ADAMS results to verify the accuracy and approve the feasibility of real time analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.502-507
• /
• 2008

An entire composite structure satellite is developing for the first time in Korea. All of the structure is made of CFRP-composite faced aluminum honeycomb sandwich structure. Here the random and sinusoidal spectrum analysis of the satellite was carried out by using the finite element method. The general spectrum analysis was herein performed but also the PSD (power spectrum density) function for random vibration analysis had been transformed into equivalent time domain function and then transient analysis is conducted. The time history of displacement, acceleration, stress and velocity responses with respect to the PSD input has been achieved by the time dependent transient function transformed from frequency PDS function. It enables one to perform dynamic durability analysis and then expect the life time of the composite structure. The composite faced sandwich structure's spectrum analysis of a domestically-developed satellite, STSAT-3, has been discussed in the present study.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1247-1251
• /
• 2016

This study aims to investigate the effect of sampling frequency to the time domain and frequency domain analysis of pulse rate variability (PRV). Typical time domain variables - AVNN, SDNN, SDSD, RMSSD, NN50 count and pNN50 - and frequency domain variables - VLF, LF, HF, LF/HF, Total Power, nLF and nHF - were derived from 7 down-sampled (250 Hz, 100 Hz, 50 Hz, 25 Hz, 20 Hz, 15 Hz, 10 Hz) PRVs and compared with the result of heart rate variability of 10 kHz-sampled electrocardiogram. Result showed that every variable of time domain analysis of PRV was significant at 25 Hz or higher sampling frequency. Also, in frequency domain analysis, every variable of PRV was significant at 15 Hz or higher sampling frequency.

• 전력전자학회논문지
• /
• 제24권3호
• /
• pp.207-214
• /
• 2019

In this study, discrete-time domain analysis is proposed to investigate the input current of a buck AC/DC light-emitting diode (LED) driver. The buck power factor correction converter can operate in both discontinuous conduction mode (DCM) and continuous conduction mode (CCM). Two discontinuous and two continuous conduction operating modes are possible depending on which event terminates the conduction of the main switch in a switching cycle. All four operating modes are considered in the discrete-time domain analysis. The peak current-mode control with slope compensation is used to design a low-cost AC/DC LED driver. A slope compensation design of the buck AC/DC LED driver is described on the basis of a discrete-time domain analysis. Experimental results are presented to confirm the usefulness of the proposed analysis.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.137-146
• /
• 2012

This study introduced the concept of Primacy Effect for the analysis of the observation characters by time so as to analyze the characters of information which the users observing the lobby in a public space get when they encounter the space. From the viewpoint that the first impression on any space can motivate the judgement of space and continuous activities, the time range with the observation characters which can be regarded as Primacy Effect was analyzed in the aspects of continuity and saccade. First, with the case of alignment by time on three times of continuous observation, the perception attributes of subjects were shown to be very different among one another depending on which time range was applied for alignment. Second, the subjects with low average value of continuous observation times were found to be relatively stable in "ii~iii time ranges" and the time range of "0~5.10 seconds" was known to be the time range of relatively stable analysis for the characters of subjects' primacy effect to be analyzed. Third, the change of the amount of acquired information could be examined concretely through the analysis of observation attributes by time range, and the time range of "iii time range" showed more stable changing characters than other time ranges. Fourth, in the "iii time range" set up as a proper time range for the analysis of primacy effect had higher average value of 3.9 times of observation frequency compared with 6 times of continuous observation. As a grand average, 6 times(19.3) of average observation value was between 3 times(21.3) and 9 times(16.9), which enabled to set up 6 times of continuous observation as the number of observation times for stable analysis of primacy effect.

• 한국산업융합학회 논문집
• /
• 제20권3호
• /
• pp.205-212
• /
• 2017

This paper focuses on worst-case delay analysis of the time-triggered IEEE 802.15.4 protocol to satisfy the industrial quality-of-service (QoS) performance. The IEEE 802.15.4 protocol is considered to be unsuitable for industrial networks because its medium access control method is contention-based CSMA/CA, which exhibits unstable performance with an unbounded delay distribution under heavy traffic. To avoid these limitations, this paper presents a time-triggered version of the nonbeacon-enabled network of IEEE 802.15.4 that relies on a time division multiplexing access (TDMA) method implemented in the application layer without any modification of specification. The timing analysis of this time-triggered IEEE 802.15.4 was executed, and the worst-case transmission delay was calculated. Based on this analysis, the time-triggered IEEE 802.15.4 is a promising alternative for wireless industrial networking.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.285-291
• /
• 2014

This study applied regression analysis to evaluate the impact of hourly average congestion calculated by bumper model in the congested area of each passage of each port on the peak time congestion, to suggest the model formula that can predict the peak time congestion. This study conducted regression analysis of hourly average congestion and peak time congestion based on the AIS survey study of 20 ports in Korea. As a result of analysis, it was found that the hourly average congestion has a significant impact on the peak time congestion and the prediction model formula was derived. This formula($C_p=4.457C_a+29.202$) can be used to calculate the peak time congestion based on the predicted hourly average congestion.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.3-11
• /
• 1999

The creep characteristics of concrete under tensile stress has been usually assumed to have the same characteristics as that under compressive stress in the time-dependent analysis of concrete structures. However, it appears from the recent experimental studies that tensile creep behavior is much different from compressive one. In particular, high sustaining tensile stress may cause time-dependent cracking and thus lead to tensile failure. It is, therefore, necessary to model the tensile creep behavior accurately for realistic time-dependent analysis of concrete structures. The present paper to have been focused to suggested more realistic model for the tensile creep behavior of concrete. The models are compared with tensile creep test data available in the literature. The proposed model may allow more refined analysis of concrete structures under time-dependent loading.