• Journal of Forest and Environmental Science
• /
• v.29 no.2
• /
• pp.157-164
• /
• 2013

The campus of Chittagong University in Bangladesh is rich in forest ecosystem. The campus has large area with vast tract of land planted with valuable timber tree species. The present study identifies and discovers the potential growing stock of the plantations in the campus area. This Growing stock was measured in three parameters viz. volume, biomass and organic carbon stock. Study identified thirty three economically valuable forest tree species in the plantations of Chittagong University. Out of three growing stock parameters, volume of timber was found to be low in indigenous tree species in the plantation sites other than exotic species. This might be due to their slow growth rate and low density in the plantation sites. However, biomass and organic carbon stock of trees per hactre area showed that indigenous species gather and sequester more timber and carbon respectively than introduced species. Plantations of Chittagong University campus can acquire $25.51m^3/ha$ volume of economically important tree species, where biomass and organic carbon stock is 222.33 tonne/ha and 107.48 tonne/ha respectively. This result shows a positive impression on the plantation site to be considered as good forest reserve.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.444-450
• /
• 2011

The goal of this study is to investigate bending properties of domestic timber. Three representative structural timber from Larix kaempferi, Pinus koraiensis, and Pinus densiflora, in the northeastern South Korea were selected. Visual grading for the timber was conducted based on KFRI notification 2009-01 and the bending strength for the timber was evaluated based on ASTM D 198 bending. The high percentage of grade 1 and 2 for Larix kaempferi shows that the KFRI notification was optimized for this species. The bending strength distributions from Pinus koraiensis and Pinus densiflora were very similar. It could be possible to specify the allowable bending properties of these two Specification using a united species group similar to spruce-pine-fir. Lastly, the bending strength of $120{\times}180mm$ structural members was higher than both existing values in KBC 2009 and design values for timber of imported species described in the NDS. Thus, 120 mm thick domestic softwoods could replace the commercial imported species and the KBC should be modified to provide design values for both timber and dimensional lumber, respectively, like NDS.

• Journal of Forest and Environmental Science
• /
• v.25 no.1
• /
• pp.35-41
• /
• 2009

Agroforestry combines agriculture and forestry technologies to create more integrated, diverse, productive, profitable, healthy and sustainable land-use systems. This study was performed in three union of Chhagalnaiya Upazila (Sub-district; administrative entity) under Feni district, Southern Bangladesh with a view to identify the tree resources, utilization pattern and economic return of major fruit and timber tree species. Information collected from a total of 45 households ranging from marginal, small, medium and large categories. Number of plant species increased with the increase of homestead area. A total of 39 plant species were recorded from the homegarden, of which 23 were fruit and 16 were timber tree species. Considerable number of vegetables was also planted under the shade of the homestead trees. The investment analysis showed that average benefit-cost ratios were greater than one, net present values were positive and internal rate of returns were more than 10%. Long term investment on horticulture and timber tree species is highly profitable if species like Swietenia mahagoni and Tectona grandis, Spondias pinnata, Syzygium cumini and Areca catechu were planted.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.572-579
• /
• 2007

Tree species diversity is an important aspect of forest ecosystem stability. Tree species inventories at defined sites and in minimum diameter classes give a reliable indicator of the diversity level as well as the structural stability level of a study site. This study was conducted to investigate the species composition and the stand structure of the natural forest, timber-harvested forest (logged-over forest) and degraded forest of the Oak-twin Township in the Bago Yoma Region of Myanmar. Natural forest showed the highest family and species richness in all the investigated forests. At the family level, Verbenaceae occupied the highest importance value index (IVI) in all the forest stands while teak (Tectona grandis Linn. f.) occupied the highest IVI at the species level. However, the small diameter classes of T. grandis and other commercial species were less than those of big diameter classes in all the investigated forests. This abnormal pattern of diameter distribution could be a problem for the sustainable production of commercial timber species in the near future.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.44-50
• /
• 2016

As a raw material for pulp and paper industry, Moso bamboo, Timber bamboo and Henon bamboo pulps were prepared by soda or soda-anthraquinone(Soda-AQ) pulping process. Soda-AQ pulp yields was higher in Henon bamboo (43.2%) than in Moso bamboo or Timber bamboo (32.7-39.2%), but quite lower than hardwood species. In Kappa number comparison, Henon bamboo pulp showed lower (16.6) with 50 min cooking to $170^{\circ}C$ than that of Moso bamboo (22.8) and Timber bamboo (18.9) with 90 min cooking to $170^{\circ}C$. Fiber length of Timber bamboo soda pulp had higher (1.46 mm) than that of Moso bamboo or Henon bamboo (1.18-1.36 mm). All three bamboo pulps showed longer average fiber length than commercial hardwood pulp. With higher pulp yield and lower Kappa number, Henon bamboo is better raw material for pulp than Moso bamboo and Timber bamboo.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2014

Timber harvest in natural forests and its implications on carbon sequestration were investigated in the Southwestern Nigeria. Data on timber harvest from forest estates for a 3-year period were collected from the official record of States' Forestry Department. The data registered the species, volume and number of timbers exploited during the study period. The data were analyzed accordingly for rate of timber harvest and carbon value of the exploited timbers using existing biomass functions. Values were compared for significant differences among states using one way analysis of variance. The results showed that the most exploited logs, in terms of volume and number of trees, have the highest amount of carbon removal. There was a variation in type of timber species being exploited from each state. The total number of harvested trees from Oyo, Ondo, Ogun, Ekiti and Osun were estimated at 100,205; 111,789; 753; 15,884 and 18,153 respectively. Total quantity of carbon removed for the 3-year period stood at 2.3 million metric tons, and this translated to 8.4 million metric tons of $CO_2$. The annual carbon and $CO_2$ removal therefore were estimated at 760,120.73 tons and 2.8 million tons/ year respectively. There were significant differences (p<0.05) in the amount of $CO_2$ removed from the five states. Based on our result, we inferred that there is increasing pressure on economic tree species and it is plausible that they are becoming scarce from the forests in Southwestern Nigeria.. If the present rate of log removal is not controlled, forests could become carbon source rather than carbon sink and the on biological conservation, wood availability and climate change may turn out grave. For the forest to perform its environmental role as carbon sink, urgent conservation measures and logging policies are needed to be put in place.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.467-469
• /
• 2003

This research aimed to develop forest type classification technique for the mixed forest with coniferous and broad-leaved species using the high resolution satellite data. QuickBird data was used as satellite data. The method of this research was to extract satellite data for every single tree crown using image segmentation technique, then to evaluate the accuracy of classification by changing grouping criteria such as tree species, families, coniferous or broad-leaved species, and timber prices. As a result, the classification of tree species and families level was inaccurate, on the other hand, coniferous or broad-leaved species and timber price level was high accurate.

• Journal of Forest and Environmental Science
• /
• v.25 no.1
• /
• pp.1-24
• /
• 2009

Teak (Tectona grandis) is one of the most valuable timber yielding species in the world, with predominant distribution in tropical or sub-tropical countries. However, natural teak available only in few countries like India, Myanmar, Laos People's Democratic Republic and Thailand. Teak grows well in deep, well-drained alluvial soils, fairly moist, warm, tropical climate with pH ranges from 6.5-7.5. Teak is cultivated in many Asian, African and South American countries for timber production. The global teak plantations are estimated to be three million hectare with major share in India (44%) followed by Indonesia (33%). India is considered as richest genetic resources of teak with large areas of natural teak bearing forests (8.9 million ha), plantations (1.5 million ha), clonal seed orchards (1000 ha) and seed production areas (5000 ha). The studies on diversity of teak populations showed that teak is an out crossing species with major portion of diversity present within the populations. The productivity and quality of teak timber varies depending upon the site and environmental conditions. Teak wood is moderately heavy, strong and tough,straight grained, coarse textured and ring porous with specific gravity varies from 0.55 to 0.70. The sapwood is white to pale yellow in colour and clearly demarcated while heartwood is dark brown or dark golden yellow in colour. Teak is one of the most durable timbers in the world, practically, impervious to fungus and white ant attack and resistant to decay. Teak wood is used in ship and boat constructions, furnitures and aesthetic needs. Genetic improvement programmes have been undertaken in countries like Thailand, India, Malaysia and Indonesia. The programme includes provenance identification and testing, plus tree selection and clonal multiplication, establishment of seed orchards and controlled hybridization. Several aspects like phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting and marketing, wood properties and future tree improvement strategy to enhance productivity have been discussed in this paper.

• Journal of Forest and Environmental Science
• /
• v.28 no.2
• /
• pp.75-83
• /
• 2012

An explanatory survey was conducted to assess preference and consumption pattern of horticultural species, their sources, location-wise planting preferences and diversity of these species in the rural homestead forest of the offshore island of Bangladesh. Assessment was done through multistage random sampling. Based on homestead size respondents were categorized into small (<0.05 ha), medium (0.05-0.25 ha) and large (>0.25 ha) and twenty from each category were selected randomly for the study. The study revealed that most of the farmer (75.5%) preferred to plant fruit tree species for future plantation followed by timber species (62.2%). But fruit-bearing plants were being gradually replaced by some exotic timber species such as Swietenia mahagoni, Acacia auriculiformis, Tectona grandis, Eucalyptus spp., etc. Diversity and abundance of fruit species was found higher in almost all homestead. A total of 41 horticultural species were identified and seven horticultural species among them were recognized as the most preferred ones in the study area. Consumption pattern was chiefly to meet the nutritional demand and to gain a quick monetary benefit. Average annual income from horticultural species was 7,183.33 Taka (US$102).

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.245-252
• /
• 2020

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.